Emerson Micro Motion F Series Bedienungsanleitung

Micro Motion®

F-Series Sensor

Installation Manual

P/N 20002298, Rev. A

April 2005

2Sensor Installation: F-Series

Before You Begin

This manual describes how to install a Micro Motion®F-Series sensor. The following information is provided

in this manual:

Customer service

For technical assistance, phone the Micro Motion Customer Service Department:

• In the U.S.A., phone 1-800-522-MASS (1-800-522-6277)

• In Canada and Latin America, phone (303) 527-5200

• In Asia, phone (65) 6770-8155

• In the U.K., phone 0800 - 966 180 (toll free)

• Outside the U.K., phone +31 (0) 318 495 670

Customers outside the United States can also contact Micro Motion Customer Service by email:

• International.Support@EmersonProcess.com

Troubleshooting

Refer to the transmitter manual for troubleshooting help.

Specifications

Full product specifications can be found in the F-Series Product Data Sheet, which is available from the

Micro Motion web site at www.micromotion.com.

Definitions

The term MVD™transmitter refers to the following transmitter models:

• Models 1500, 1700, 2500, and 2700

• Models 3500 and 3700

Installation steps

Determining a Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11

Orienting the Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14

Mounting the Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 15

Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 17

Grounding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 21

Additional information

Purge Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22

Return Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 24

Emerson logos are trademarks of Emerson Electric Co. All other trademarks are property of their respective owners.

Sensor Installation: F-Series 3

Before You Begin

European installations

This Micro Motion product complies with all applicable European directives when properly installed in

accordance with the instructions in this manual. Refer to the EC declaration of conformity for directives that

apply to this product.

The EC declaration of conformity, with all applicable European directives, and the complete ATEX

Installation Drawings and Instructions are available on the internet at www.micromotion.com/atex or

through your local Micro Motion support center.

Purge plugs

If you remove a purge plug from the sensor case, it will be necessary to repurge the case. Refer to Case

purging procedure on page 22 for more information about repurging the sensor case.

Installation options

The F-Series sensor makes up one part of a Coriolis flowmeter. The other part is a transmitter. F-Series

sensors (except Model F300A) are available with the following electronics interfaces:

• An integral core processor for connecting to a 4-wire remotely mounted transmitter or to a

user-supplied remote host (Figure 1).

• An integrally mounted Model 1700 or 2700 transmitter (Figure 2).

• A 9-wire junction box for connecting to a remotely mounted transmitter or a remotely mounted core

processor (Figure 3).

• An integrally mounted IFT9701 transmitter (not available with Model F300) (Figure 4).

Model F300A sensors include a flexible conduit. Sensor electronics are mounted at the end of the flexible

conduit. Model F300A sensors are available with:

• A core processor for connecting to a 4-wire remotely mounted transmitter or to a user-supplied remote

host (Figure 5).

• A Model 1700 or 2700 transmitter (Figure 6).

• A 9-wire junction box for connecting to a remotely mounted transmitter or a remotely mounted core

processor (Figure 7).

WARNING

Removing a purge plug compromises the secondary containment of the

sensor and could expose the user to process fluid.

The user should take all necessary precautions when removing the purge plugs,

because the sensor case may contain process fluid.

4Sensor Installation: F-Series

Before You Begin

Figure 1 F-Series sensor with core processor

Approval tag

Flow direction arrow

Core processor housing

Calibration tag

Process connection

Approval tag

Calibration tag

Core processor housing

Purge fitting

Sensor with purge fittings

Sensor Installation: F-Series 5

Before You Begin

Figure 2 F-Series sensor with integrally mounted Model 1700/2700 transmitter

Model 1700 or 2700 transmitter

Approval tag

Flow direction arrow

Core processor housing

Calibration tag

Process connection

Calibration tag

Approval tag

Purge fitting

Model 1700 or 2700 transmitter

Sensor with purge fittings

6Sensor Installation: F-Series

Before You Begin

Figure 3 F-Series sensor with junction box

Junction box

Approval tag

Flow direction arrow

Approval tag

Process connection

Calibration tag

Purge fitting

Junction box

Sensor with purge fittings

Calibration tag

Sensor Installation: F-Series 7

Before You Begin

Figure 4 F-Series sensor with integrally mounted IFT9701 transmitter

Calibration tag

Flow direction arrow

Model IFT9701 transmitter

Approval tag

Process connection

Model IFT9701 transmitter

Approval tag

Calibration tag

Purge fitting

Sensor with purge fittings

8Sensor Installation: F-Series

Before You Begin

Figure 5 Model F300A sensor with flexible conduit extended core processor

Flow direction arrow

Core processor housing

Calibration tag

Process connection

Flexible conduit

Length: 36″(914 mm)

Minimum bend radius 2 1/8″(54 mm)

Approval tag

Purge fitting

(optional)

Purge fitting

(optional)

Sensor Installation: F-Series 9

Before You Begin

Figure 6 Model F300A sensor with flexible conduit extended Model 1700/2700 transmitter

Model 1700 or 2700 transmitter

Flow direction arrow

Core processor housing

Calibration tag

Process connection

Approval tag

Flexible conduit

Length: 36″(914 mm)

Minimum bend radius 2 1/8″(54 mm)

Purge fitting

(optional)

Purge fitting

(optional)

10 Sensor Installation: F-Series

Before You Begin

Figure 7 Model F300A sensor with flexible conduit extended junction box

Junction box

Flow direction arrow

Calibration tag

Process connection

Approval tag

Flexible conduit

Length: 36″(914 mm)

Minimum bend radius 2 1/8″(54 mm)

Purge fitting

(optional)

Purge fitting

(optional)

Andere Handbücher für Micro Motion F Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Emerson Zubehör Handbücher

Emerson

Emerson 03100-0001-0001 Bedienungsanleitung

Emerson

Emerson Rosemount 0065 Bedienungsanleitung

Emerson

Emerson DVS205 Bedienungsanleitung

Emerson

Emerson Rosemount 3900 Bedienungsanleitung

Emerson

Emerson Rosemount 400 Bedienungsanleitung

Emerson

Emerson EASYHEAT MSA-1 Montageanleitung

Emerson

Emerson Rosemount 404 Bedienungsanleitung

Emerson

Emerson Rosemount Volume 1 Bedienungsanleitung

Emerson

Emerson ER107001 Bedienungsanleitung

Emerson

Emerson Micro Motion T Series Bedienungsanleitung

Emerson

Emerson Rosemount 396 Bedienungsanleitung

Emerson

Emerson ER40 Bedienungsanleitung

Emerson

Emerson Rosemount 389 Bedienungsanleitung

Emerson

Emerson Rosemount 396PVP Bedienungsanleitung

Emerson

Emerson Rosemount 214C Bedienungsanleitung

Emerson

Emerson Micro Motion Elite Coriolis CMF400 Bedienungsanleitung

Emerson

Emerson Rosemount 3051S Series Bedienungsanleitung

Emerson

Emerson Rosemount Hx338+ Bedienungsanleitung

Emerson

Emerson Rosemount 225 Bedienungsanleitung

Emerson

Emerson Liebert Xtreme Density Leitfaden

Emerson

Emerson MICRO MOTION T-SERIES Bedienungsanleitung

Emerson

Emerson MICROMOTION CNG050 Bedienungsanleitung

Emerson

Emerson Fisher 249W Bedienungsanleitung

Emerson

Emerson Micro Motion ELITE CMF200A Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung