Emerson Micro Motion TA Series Bedienungsanleitung
Installation Manual
MMI-20040393, Rev AD
April 2019
Micro Motion® TA-Series Flow and Density
Meters
Safety and approval information
This Micro Motion product complies with all applicable European directives when properly installed in accordance with the
instructions in this manual. Refer to the EU declaration of conformity for directives that apply to this product. The EU declaration
of conformity, with all applicable European directives, and the complete ATEX Installation Drawings and Instructions are available
on the internet at www.emerson.com or through your local Micro Motion support center.
Information affixed to equipment that complies with the Pressure Equipment Directive, can be found on the internet at
www.emerson.com.
For hazardous installations in Europe, refer to standard EN 60079-14 if national standards do not apply.
Other information
Full product specifications can be found in the product data sheet. Troubleshooting information can be found in the configuration
manual. Product data sheets and manuals are available from the Micro Motion web site at www.emerson.com.
Return policy
Follow Micro Motion procedures when returning equipment. These procedures ensure legal compliance with government
transportation agencies and help provide a safe working environment for Micro Motion employees. Micro Motion will not accept
your returned equipment if you fail to follow Micro Motion procedures.
Return procedures and forms are available on our web support site at www.emerson.com, or by phoning the Micro Motion
Customer Service department.
Emerson Flow customer service
Email:
•Worldwide: [email protected]
•Asia-Pacific: [email protected]
Telephone:
North and South America Europe and Middle East Asia Pacific
United States 800-522-6277 U.K. 0870 240 1978 Australia 800 158 727
Canada +1 303-527-5200 The Netherlands +31 (0) 704 136
666
New Zealand 099 128 804
Mexico +41 (0) 41 7686
111
France 0800 917 901 India 800 440 1468
Argentina +54 11 4837 7000 Germany 0800 182 5347 Pakistan 888 550 2682
Brazil +55 15 3413 8000 Italy 8008 77334 China +86 21 2892 9000
Central & Eastern +41 (0) 41 7686
111
Japan +81 3 5769 6803
Russia/CIS +7 495 981 9811 South Korea +82 2 3438 4600
Egypt 0800 000 0015 Singapore +65 6 777 8211
Oman 800 70101 Thailand 001 800 441 6426
Qatar 431 0044 Malaysia 800 814 008
Kuwait 663 299 01
South Africa 800 991 390
Saudi Arabia 800 844 9564
UAE 800 0444 0684
2
Contents
Chapter 1 Planning........................................................................................................................ 5
1.1 About this document........................................................................................................................5
1.2 Related documentation....................................................................................................................5
1.3 Installation checklist......................................................................................................................... 6
1.4 Best practices................................................................................................................................... 7
1.5 Temperature limits...........................................................................................................................7
Chapter 2 Mounting.......................................................................................................................9
2.1 Mount the meter.............................................................................................................................. 9
Chapter 3 Wiring......................................................................................................................... 11
3.1 Tantalum wiring............................................................................................................................. 11
Chapter 4 Grounding....................................................................................................................13
Chapter 5 Purge the sensor case .................................................................................................. 15
Installation Manual Contents
MMI-20040393 April 2019
Installation Manual 3
Contents Installation Manual
April 2019 MMI-20040393
4 Micro Motion TA Series
1 Planning
1.1 About this document
This manual provides information on planning, mounting, and grounding the meter. For
information on full configuration, maintenance, troubleshooting, or service of the
transmitter, see the configuration and use manual.
The information in this document assumes that users understand:
•Basic transmitter and sensor installation, configuration, and maintenance concepts
and procedures
•All corporate, local government, and national government safety standards and
requirements that guard against injuries and death
1.2 Related documentation
You can find all product documentation on the product documentation DVD shipped with
the product or at www.emerson.com.
For more information, see any of the following documents:
Product Data Sheets
•Micro Motion TA-Series Flow and Density Meters Product Data Sheet
•Micro Motion Model 5700 Product Data Sheet
Other installation manuals
•Micro Motion Model 5700 Transmitters with Configurable Outputs: Installation Manual
•Micro Motion Model 5700 with Ethernet Transmitters: Installation Manual
•Micro Motion Model 5700 Transmitters for FOUNDATION™ Fieldbus: Installation Manual
•Micro Motion Model 5700 Transmitters with Intrinsically Safe Outputs: Installation Manual
Configuration and use manuals
•Micro Motion Model 5700 Transmitters with Configurable Outputs: Configuration and Use
Manual
•Micro Motion Model 5700 with Ethernet Transmitters: Configuration and Use Manual
•Micro Motion Model 5700 Transmitters for FOUNDATION™ Fieldbus: Configuration and Use
Manual
•Micro Motion Model 5700 Transmitters with Intrinsically Safe Outputs: Configuration and
Use Manual
Other documents
•Modbus Interface Tool
•For hazardous area installations, see the approval documentation shipped with the
transmitter, or download the appropriate documentation at www.emerson.com.
Installation Manual Planning
MMI-20040393 April 2019
Installation Manual 5
1.3 Installation checklist
□Safety messages are provided throughout this content to protect personnel and
equipment. Read each safety message carefully before proceeding to the next step.
□If possible, install the meter in a location that will prevent direct exposure to sunlight.
The environmental limits for the meter may be further restricted by hazardous area
approvals.
□If you plan to mount the meter in a hazardous area:
—Verify that the meter has the appropriate hazardous area approval. Each meter has
a hazardous area approval tag attached to the meter housing.
—For ATEX/IECEx installations, strictly adhere to the safety instructions documented
in the ATEX/IECEx approvals documentation available on the Product
Documentation DVD shipped with the product or at www.emerson.com. Be sure to
reference this documentation in addition to the information shown in this guide.
□Verify that the local ambient and process temperatures are within the limits of the
meter.
□Follow the wiring instructions in the Model 5700 installation manual for signal and
power wiring.
□Mount the meter in a location and orientation that allows sufficient clearance to open
the housing cover. Allow 8 in (203 mm) to 10 in (254 mm) clearance at the wiring
access points.
□Install the meter so that the flow direction arrow on the sensor case matches the actual
forward flow of the process. Flow direction is also software-selectable.
1.3.1 Orientation options
You can mount the meter in any orientation as long as the conduit openings or display do
not point upward. Keep the sensor tubes full of process fluid to achieve best performance.
CAUTION
Installing the meter with the conduit openings or display facing upward risks moisture
entering the housing, which could damage the meter.
Table 1-1: Preferred sensor orientation
Liquids
Planning Installation Manual
April 2019 MMI-20040393
6 Micro Motion TA Series
Table 1-1: Preferred sensor orientation (continued)
Gases
Slurries
1.4 Best practices
•There are no pipe run requirements for Emerson meters. Straight runs of pipe
upstream or downstream are unnecessary.
•If the meter is installed in a vertical pipeline, liquids and slurries should flow upward
through the meters. Gases should flow downward.
•Keep the meter tubes full of process fluid.
•For halting flow through the meter with a single valve, install the valve downstream
from the meter.
•Minimize bending and torsional stress on the meter. Do not use the meter to align
misaligned piping.
•The meter does not require external supports. The flanges will support the sensor in
any orientation.
•Do not use the junction box to pick up the meter.
•Do not use the junction box as a step.
•Do not unscrew and rotate the junction box as this will break the wires.
•Do not install the meter in suspended pipes.
•Do not adjust the meter position by pulling or grasping the meter.
1.5 Temperature limits
Temperature type Min Max
Process temperature -40 °F (-40.0 °C) 356 °F (180.0 °C)
Ambient temperature -40 °F (-40.0 °C) 176 °F (80.0 °C)
Use the extended mount junction box (electronic interface code H) for process
temperatures above 176 °F (80.0 °C).
Installation Manual Planning
MMI-20040393 April 2019
Installation Manual 7
Planning Installation Manual
April 2019 MMI-20040393
8 Micro Motion TA Series
2 Mounting
2.1 Mount the meter
Use your common practices to minimize torque and bending load on process connections.
Prerequisites
Read the installation checklist and best practices if you have not yet done so already. See
Installation checklist and Best practices.
Procedure
Mount the meter using the following illustration.
Installation Manual Mounting
MMI-20040393 April 2019
Installation Manual 9
Mounting Installation Manual
April 2019 MMI-20040393
10 Micro Motion TA Series
Andere Handbücher für Micro Motion TA Series
2
Inhaltsverzeichnis
Andere Emerson Messgerät Handbücher
Emerson
Emerson PACSystems RX3i Bedienungsanleitung
Emerson
Emerson Rosemount 3410 Series Programmierhandbuch
Emerson
Emerson Rosemount 3812 Bedienungsanleitung
Emerson
Emerson Daniel 3410 Series Bedienungsanleitung
Emerson
Emerson Rosemount 5300 Series Bedienungsanleitung
Emerson
Emerson Appleton AEPGI Bedienungsanleitung
Emerson
Emerson E2 Bedienungsanleitung
Emerson
Emerson Rosemount CT5100 Bedienungsanleitung
Emerson
Emerson Rosemount 3051SF Series Bedienungsanleitung
Emerson
Emerson Daniel Series Bedienungsanleitung
Emerson
Emerson Rosemount 3410 Series Programmierhandbuch
Emerson
Emerson ControlWave EFM 4710A Bedienungsanleitung
Emerson
Emerson Machinery Health Expert CSI 2600 Bedienungsanleitung
Emerson
Emerson FloBoss 103 Bedienungsanleitung
Emerson
Emerson Rosemount OPM3000 Bedienungsanleitung
Emerson
Emerson Rosemount Analytical RDO Bedienungsanleitung
Emerson
Emerson FB2100 Bedienungsanleitung
Emerson
Emerson MRLDS-250 Bedienungsanleitung
Emerson
Emerson PENBERTHY H Series Handbuch
Emerson
Emerson Rosemount CT5100 Bedienungsanleitung
