Emerson Rosemount 3051S Series Bedienungsanleitung

www.rosemount.com

¢00825-0100-4809[¤

Quick Installation Guide

00825-0100-4802, Rev BA

June 2007 Rosemount 3051S Wireless

Rosemount 3051S Series Pressure Transmitter with

Wireless Enabled HART®Solutions

Rosemount 3051SF Series Flowmeter Transmitter

with Wireless Enabled HART®Solutions

Step 1: Mount the Transmitter

Step 2: Connect the Battery

Step 3: Trim the Transmitter

Step 4: Verify Operation

Step 5: Reference Information

Product Certifications

Start

End

4802 Rev BA.fm Page 1 Friday, June 8, 2007 1:58 PM

Product Discontinued. Click here for the new WirelessHART document.

Quick Installation Guide

00825-0100-4802, Rev BA

June 2007

Rosemount 3051S Wireless

registered trademarks of Rosemount Inc.

Rosemount Inc.

8200 Market Boulevard

Chanhassen, MN USA 55317

T (US) (800) 999-9307

T (Intnl) (952) 906-8888

F (952) 949-7001

Emerson Process Management

GmbH & Co. OHG

Argelsrieder Feld 3

82234 Wessling

Germany

T 49 (8153) 9390, F49 (8153) 939172

Emerson Process Management

Asia Pacific Private Limited

1 Pandan Crescent

Singapore 128461

T (65) 6777 8211

F (65) 6777 0947/65 6777 0743

Beijing Rosemount Far East Instrument Co.,

Limited

No. 6 North Street, Hepingli, Dong Cheng District

Beijing 100013, China

T (86) (10) 6428 2233

F (86) (10) 6422 8586

IMPORTANT NOTICE

This installation guide provides basic guidelines for Rosemount 3051S Wireless Transmitters

(reference manual document number 00809-0100-4802). It does not provide instructions for

diagnostics, maintenance, service, or troubleshooting. Refer to the Rosemount 3051S Wireless

reference manual (document number 00809-0100-4802) for more instruction. The manual and

this QIG are also available electronically on www.rosemount.com.

WARNING

Explosions could result in death or serious injury:

Installation of this transmitter in an explosive environment must be in accordance with the appropriate

local, national, and international standards, codes, and practices. Please review the product

certifications section for any restrictions associated with a safe installation.

• Before connecting a 375 Field Communicator in an explosive atmosphere, ensure the instruments

are installed in accordance with intrinsically safe or non-incendive field wiring practices.

Process leaks may cause harm or result in death.

• Install and tighten process connectors before applying pressure.

Electrical shock can result in death or serious injury.

• Avoid contact with the leads and terminals. High voltage that may be present on leads can cause

electrical shock.

IMPORTANT NOTICE

The Rosemount 3051S and all other wireless devices should be installed only after the 1420 Wireless

Gateway has been installed and is functioning properly. Wireless devices should also be powered up

in order of proximity from the 1420 Wireless Gateway, beginning with the closest. This will result in a

simpler and faster network installation.

IMPORTANT NOTICE

Shipping considerations for wireless products (Lithium Batteries):

The unit was shipped to you without the battery installed. Please remove the battery pack prior to

shipping the unit.

Primary lithium batteries are regulated in transportation by the U. S. Department of Transportation,

and are also covered by IATA (International Air Transport Association), ICAO (International Civil

Aviation Organization), and ARD (European Ground Transportation of Dangerous Goods). It is the

responsibility of the shipper to ensure compliance with these or any other local requirements. Please

consult current regulations and requirements before shipping.

4802 Rev BA.fm Page 2 Friday, June 8, 2007 1:58 PM

Product Discontinued. Click here for the new WirelessHART document.

Quick Installation Guide

00825-0100-4802, Rev BA

June 2007 Rosemount 3051S Wireless

STEP 1: MOUNT THE TRANSMITTER

Liquid Flow Applications

1. Place taps to the side of the line.

2. Mount beside or below the taps.

3. Mount the transmitter so that the drain/vent

valves are oriented upward.

Gas Flow Applications

1. Place taps in the top or side of the line.

2. Mount beside or above the taps.

Steam Flow Applications

1. Place taps to the side of the line.

2. Mount beside or below the taps.

3. Fill impulse lines with water.

4802 Rev BA.fm Page 3 Friday, June 8, 2007 1:58 PM

Product Discontinued. Click here for the new WirelessHART document.

Quick Installation Guide

00825-0100-4802, Rev BA

June 2007

Rosemount 3051S Wireless

STEP 1 CONTINUED...

NOTE:

Position the antenna such that it is VERTICAL, either straight up or straight down.

Panel Mount Pipe Mount

Coplanar™Flange

Traditional Flange

In-line

4802 Rev BA.fm Page 4 Friday, June 8, 2007 1:58 PM

Product Discontinued. Click here for the new WirelessHART document.

Quick Installation Guide

00825-0100-4802, Rev BA

June 2007 Rosemount 3051S Wireless

STEP 2: CONNECT THE BATTERY

Connect the battery pack.

NOTE:

Wireless devices should be powered up in order of proximity from the 1420 Wireless

Gateway, beginning with the closest device to the 1420. This will result in a simpler

and faster network installation.

STEP 3: TRIM THE TRANSMITTER

For the Wireless enabled HART transmitter (option code X), use the “3051S WPT” DD.

NOTE:

This can also be completed using AMS™Suite: Intelligent Device Manager once the

device has joined the network.

NOTE:

In order for the 375 Field Communicator to interface with the 3051S, the battery must

be connected.

NOTE:

Transmitters are shipped fully calibrated per request or by the factory default of full

scale (span = upper range limit).

COMM

P/N 00753-9200-0010

COMM

P/N00753-9200-0010

4802 Rev BA.fm Page 5 Friday, June 8, 2007 1:58 PM

Product Discontinued. Click here for the new WirelessHART document.

Quick Installation Guide

00825-0100-4802, Rev BA

June 2007

Rosemount 3051S Wireless

STEP 3 CONTINUED...

Zero Trim

A zero trim is a single-point adjustment used for compensating mounting position and line

pressure effects. When performing a zero trim, ensure that the equalizing valve is open and

all wet legs are filled to the correct level.

If zero offset is less than 3% of true zero, follow the “Using the 375 Field Communicator”

instructions below to perform a zero trim. If zero offset is greater than 3%, see the 3051S

Reference Manual (document number 00809-0100-4801) to perform a rerange using the

375 Field Communicator.

Using the 375 Field Communicator

Close the Housing

Close the housing cover and tighten to safety specification. Always ensure a proper seal by

installing the electronics housing covers so that metal contacts metal, but do not over

tighten.

HART Fast Keys Steps

1, 2, 2, 2, 1 1. Equalize or vent the transmitter and connect HART communicator.

2. At the menu, input the HART Fast Key sequence.

3. Follow the commands to perform a zero trim.

4802 Rev BA.fm Page 6 Friday, June 8, 2007 1:58 PM

Product Discontinued. Click here for the new WirelessHART document.

Quick Installation Guide

00825-0100-4802, Rev BA

June 2007 Rosemount 3051S Wireless

STEP 4: VERIFY OPERATION

Operation can be verified in four locations: at the device via the LCD, by using the 375 Field

Communicator, at the Gateway via the 1420 Wireless Gateway’s integrated web server, or

via AMS™Suite: Intelligent Device Manager.

Local Display

The LCD will display the PV value at the same rate as the transmit rate, but no faster than

once per minute. Refer to the Rosemount 3051S Wireless manual for error codes and other

LCD messages. Press the Diagnostic button to display the TAG, Device ID, Network ID,

Network Join Status and Device Status screens.

375 Field Communicator

For the Wireless enabled HART transmitter (option code X), use the “3051S WPT” DD.

Figure 1. 375 Field Communicator Connections

1420 Wireless Gateway

In the 1420’s integrated web server, navigate to the Explorer>Status page. This page will

show whether the device has joined the network and if it is communicating properly.

NOTE:

It may take several minutes for the device to join the network.

Searching for Network Joining Network Connected with

1Parent

Connected with

2 Parents

Function Key Sequence Menu Items

Network 1, 4, 3, 1 Smart Power, Network ID, Set Join

Key, Radio State

n e t w k

a -s r c h

n e t w k

j o i n g

n e t w k

1 p a r n t

n e t w k

2 p a r n t

COMM

P/N 00753-9200-0010

COMMCOMM

P/N00753-9200-0010P/N00753-9200-0010

4802 Rev BA.fm Page 7 Friday, June 8, 2007 1:58 PM

Product Discontinued. Click here for the new WirelessHART document.

Quick Installation Guide

00825-0100-4802, Rev BA

June 2007

Rosemount 3051S Wireless

Figure 2. 1420 Network Settings

AMS™Suite: Intelligent Device Manager

When the device has joined the network, it will appear in the Device Manager as illustrated

below.

4802 Rev BA.fm Page 8 Friday, June 8, 2007 1:58 PM

Product Discontinued. Click here for the new WirelessHART document.

Quick Installation Guide

00825-0100-4802, Rev BA

June 2007 Rosemount 3051S Wireless

Troubleshooting

If the device is not operating properly, refer to the troubleshooting section of the manual. The

most common cause of incorrect operation is the Network ID and Join Key. The Network ID

and Join Key in the device must match that of the 1420 Wireless Gateway.

The Network ID and Join Key may be obtained from the 1420 Wireless Gateway on the

Setup>Network>Settings page on the web server (see Figure 2: 1420 Network Settings on

page 8). The Network ID and Join Key may be changed in the wireless device by using the

following Fast Key sequence.

Function Key Sequence Menu Items

Network 1, 4, 3, 1 Smart Power, Network ID, Set Join

Key, Radio State

4802 Rev BA.fm Page 9 Friday, June 8, 2007 1:58 PM

Product Discontinued. Click here for the new WirelessHART document.

Quick Installation Guide

00825-0100-4802, Rev BA

June 2007

Rosemount 3051S Wireless

STEP 5: REFERENCE INFORMATION

Figure 3. Terminal Diagram

NOTE:

In order to communicate with a 375 Field Communicator, the device must be powered

by connecting the battery pack.

Table 1. HART Fast Key Sequence

Figure 4. 375 Field Communicator Connections

Function Key Sequence Menu Items

Device Info 1, 3, 4 Date, Descriptor, Message, Write

Protect, Model, Model Number I, II, III

Process Variables 1, 1 Pressure, % Range, Snsr Temp,

Supply Voltage, PV is

Sensor Trim 1, 2, 2, 2 Zero Trim, Lower Sensor Trim, Upper

Sensor Trim, Calibration Type, Sensor

Trim Points

Network 1, 4, 3, 1 Smart Power, Network ID, Set Join

Key, Radio State

COMM

P/N 00753-9200-0010

COMM

P/N 00753-9200-0010

COMMCOMM

P/N00753-9200-0010P/N00753-9200-0010

4802 Rev BA.fm Page 10 Friday, June 8, 2007 1:58 PM

Product Discontinued. Click here for the new WirelessHART document.

Andere Handbücher für Rosemount 3051S Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Emerson Sender Handbücher

Emerson

Emerson PT5N Series Bedienungsanleitung

Emerson

Emerson Rosemount 248 Bedienungsanleitung

Emerson

Emerson Rosemount FCL-01 Bedienungsanleitung

Emerson

Emerson Rosemount 3051N Bedienungsanleitung

Emerson

Emerson Micro Motion 5700 Kurzanleitung

Emerson

Emerson Micro Motion IFT9701 Bedienungsanleitung

Emerson

Emerson Rosemount 1408A Bedienungsanleitung

Emerson

Emerson Rosemount 2051CF series Bedienungsanleitung

Emerson

Emerson Rosemount 3300 Series Bedienungsanleitung

Emerson

Emerson Rosemount 4088B MultiVariable Bedienungsanleitung

Emerson

Emerson Liebert SL-31080 Bedienungsanleitung

Emerson

Emerson Rosemount 702 Bedienungsanleitung

Emerson

Emerson Rosemount Oxymitter 4000 Bedienungsanleitung

Emerson

Emerson Rosemount 3051S Series Bedienungsanleitung

Emerson

Emerson Rosemount 3051S ERS Bedienungsanleitung

Emerson

Emerson Micro Motion 5700 Bedienungsanleitung

Emerson

Emerson Rosemount5081 Bedienungsanleitung

Emerson

Emerson Micro Motion ELITE Bedienungsanleitung

Emerson

Emerson PT5N FLR Series Bedienungsanleitung

Emerson

Emerson Rosemount 3144P Bedienungsanleitung

Emerson

Emerson Rosemount 3051S Series Bedienungsanleitung

Emerson

Emerson Oxymitter 5000 Bedienungsanleitung

Emerson

Emerson Rosemount 3051S Series Bedienungsanleitung

Emerson

Emerson MICRO MOTION 2700 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung