Emerson Rosemount 702 Bedienungsanleitung

Quick Start Guide

00825-0400-4702, Rev GE

April 2018

Rosemount™ 702 Wireless Discrete

Transmitter

About this guide

This manual supplement provides information on installing, operating, and maintaining the

Rosemount 702 Wireless Discrete Transmitter for plunger arrival detection. The table below lists

the variants of the Rosemount 702 transmitter; refer to the table if looking for documentation on

variants. Refer to the Rosemount 702 Reference Manual for more instruction. This guide and the

manual are available electronically on Emerson.com/Rosemount

Model

number Functionality Manual

702DX22

/32/42 Two channel discrete I/O Rosemount 702 Wireless Discrete Transmitter Refer‐

ence Manual

702DX61 One channel for Tyco TraceTek

liquid hydrocarbon leak detec-

tion

Rosemount 702 Wireless Discrete Transmitter Refer‐

ence Manual

702DX52 Discrete Transmitter for Plung-

er Arrival Detection Rosemount 702 Wireless Desicrete Transmitter

Reference Manual Supplement

Product description

The Roseount 702 for plunger arrival detection is designe dto work with the ETC Cyclops plunger

arrival sensor (ET-11000). The transmitter provides power to the plunger arrival sensor, reads and

communication the sensor state via wirelessHART. Features of the Rosemount 702 Transmitter

include:

•Simple and easy installations proctices currently being used for robust installations

•Flexibility to meet your most demanding applications

•Sensor state latching for host system compatibility

•Provides poiwer to external plunger arrival sensor

•The integral LCD display conveniently displays the latched plunger sensor state,

power output state, and diagnostics of the transmitter

Quick Start Guide April 2018

2Rosemount 702 Wireless Discrete Transmitter

Rosemount 702 Transmitter for Plunger ArrivalFigure A-:

A Plunger Arrival Sensor (ETC Cyclops) G Lower Lubricator Outlet

B 702 Plunger Arrival H Well Casing

C Lubricator I Production gas

D Plunger J Well casing/production tube

E Wastewater K Well casing

F Upper Lubricator Outlet

Contents

Wireless considerations ................................ 4

Physical installation ...................................... 7

Device network configuration .....................14

Verify operation ..........................................16

Reference information: wiring switch inputs,

output circuits, and leak sensors .................20

Safety shower and eye wash

monitoring ................................................. 39

Product Certifications ................................. 42

Quick Start Guide April 2018

3Rosemount 702 Wireless Discrete Transmitter

1 Wireless considerations

1.1 Power up sequence

The Smart Wireless Gateway should be installed and functioning properly

before any wireless field devices are powered. Install the Black Power Module,

SmartPower™ Solutions model number 701PBKKF (part number

00753-9220-0001) into the Rosemount 702 Transmitter to power the

device. Wireless devices should be powered up in order of proximity from the

Gateway, beginning with the closest device, then working outward from the

Gateway. This results in a simpler and faster network installation. Enable

Active Advertising on the Gateway to ensure new devices are able to join the

network faster. For more information see the Emerson™ Wireless 1420

Gateway Reference Manual.

1.2 Antenna position

The antenna should be positioned vertically, either straight up or straight

down, and it should be approximately 3 ft. (1 m) from any large structure,

building, or conductive surface to allow for clear communication to other

devices.

Antenna PositionFigure 1-1:

Quick Start Guide April 2018

4Rosemount 702 Wireless Discrete Transmitter

1.3 Conduit entry

Upon installation, ensure each conduit entry is either sealed with a conduit

plug using approved thread sealant, or has an installed conduit fitting or

cable gland with appropriate threaded sealant. Note the conduit entries on

the Rosemount 702 Transmitter are threaded ½–14 NPT.

Conduit EntryFigure 1-2:

A. Conduit entry

1.4 Field Communicator connections

The power module needs to be installed before the Field Communicator can

interface with the Rosemount 702 Transmitter. This transmitter uses the

Black Power Module; Order model number 701PBKKF or part number

00753-9220-0001.

April 2018 Quick Start Guide

Quick Start Guide 5

Connection DiagramFigure 1-3:

COMM

P/N00753-9200-0020

CH1 +

CMN

CH2 +

CMN

CH Input Mode:

Dry Contact Only

CH Output Mode:

26VDC Max

100mA Max

The Rosemount 702 Transmitter and all other wireless devices should not be

set up until after the Smart Wireless Gateway has been installed and is

functioning properly.

Quick Start Guide April 2018

6Rosemount 702 Wireless Discrete Transmitter

2 Physical installation

The Rosemount 702 Transmitter can be installed in one of two

configurations:

•Direct mount, where the switch is connected directly to the Rosemount

702 Transmitter housing’s conduit entry.

•Remote mount, where the switch is mounted separate from the

Rosemount 702 Transmitter housing, then connected to the Rosemount

702 Transmitter via conduit.

Select the installation sequence that corresponds to the mounting

configuration.

2.1 Direct mount

Note

Direct mount installation should not be employed when using tubing and

connectors such as Swagelok® fittings.

Direct MountFigure 2-1:

A. Rosemount 702 Transmitter

B. Float switch

April 2018 Quick Start Guide

Quick Start Guide 7

Procedure

1. Install the switch according to standard installation practices making sure

to use thread sealant on all connections.

2. Attach the Rosemount 702 Transmitter housing to the switch using the

threaded conduit entry.

3. Attach the switch wiring to the terminals as indicated on the wiring

diagram (see Chapter 5).

4. Connect the Black Power Module.

Note

Wireless devices should be powered up in order of proximity from the

Smart Wireless Gateway, beginning with the closest device to the

Gateway. This will result in a simpler and faster network installation.

5. Close the housing cover and tighten to safety specification. Always

ensure a proper seal so the metal touches metal, but do not over tighten.

6. Position antenna vertically, either straight up or straight down. The

antenna should be approximately 3 ft. (0.91 m) from any large structures

or buildings, to allow clear communication to other devices.

Quick Start Guide April 2018

8Rosemount 702 Wireless Discrete Transmitter

2.2 Remote mount

Remote MountFigure 2-2:

A. Rosemount 702 Transmitter

B. Float switch

Procedure

1. Install the switch according to standard installation practices making sure

to use thread sealant on all connections.

2. Run wiring (and conduit if necessary) from the switch to the Rosemount

702 Transmitter.

3. Pull the wiring through the threaded conduit entry of the Rosemount 702

Transmitter.

4. Attach the switch wiring to the terminals as indicated on the wiring

diagram (see Chapter 5).

5. Connect the black power module.

April 2018 Quick Start Guide

Quick Start Guide 9

Note

Wireless devices should be powered up in order of proximity from the

Smart Wireless Gateway, beginning with the closest device to the

gateway. This will result in a simpler and faster network installation.

6. Close the housing cover and tighten to safety specification. Always

ensure a proper seal so the metal touches metal, but do not over tighten.

7. Position antenna vertically, either straight up or straight down. The

antenna should be approximately 3 ft. (0.91 m) from any large structures

or buildings, to allow clear communication to other devices.

2.3 High gain, remote antenna (optional)

The high gain, remote antenna options provide flexibility for mounting the

Rosemount 702 Transmitter based on wireless connectivity, lightning

protection, and current work practices.

Quick Start Guide April 2018

10 Rosemount 702 Wireless Discrete Transmitter

Andere Handbücher für Rosemount 702

Inhaltsverzeichnis

Andere Emerson Sender Handbücher

Emerson

Emerson Rosemount 3144P Bedienungsanleitung

Emerson

Emerson Rosemount 3101 Bedienungsanleitung

Emerson

Emerson Rosemount 2088 Bedienungsanleitung

Emerson

Emerson Rosemount 648 Bedienungsanleitung

Emerson

Emerson Rosemount 2240S Bedienungsanleitung

Emerson

Emerson Rosemount 3300 Series Bedienungsanleitung

Emerson

Emerson Rosemount 248 Bedienungsanleitung

Emerson

Emerson PT5N FLR Series Bedienungsanleitung

Emerson

Emerson Rosemount 3051HT Bedienungsanleitung

Emerson

Emerson Rosemount 4088B MultiVariable Bedienungsanleitung

Emerson

Emerson Rosemount 248 Bedienungsanleitung

Emerson

Emerson Rosemount 3144P Bedienungsanleitung

Emerson

Emerson Rosemount 5400 Series Bedienungsanleitung

Emerson

Emerson Rosemount 3144P Bedienungsanleitung

Emerson

Emerson Solu Comp Xmt-P-FF/FI Bedienungsanleitung

Emerson

Emerson Rosemount 2051G Bedienungsanleitung

Emerson

Emerson Rosemount 1408A Bedienungsanleitung

Emerson

Emerson Rosemount 6888A Bedienungsanleitung

Emerson

Emerson Rosemount5081 Bedienungsanleitung

Emerson

Emerson Rosemount 2240S Bedienungsanleitung

Emerson

Emerson Micro Motion 1700 Kurzanleitung

Emerson

Emerson Rosemount 644h Bedienungsanleitung

Emerson

Emerson Micro Motion 5700 Bedienungsanleitung

Emerson

Emerson Micro Motion 5700 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung