Eneo DPR-2016 Bedienungsanleitung
Operating Instructions
Digital Video Recorder
Models: DPR-2016/500D
3
DPR-2016/500D
Safety instructions
EMC class
This video recorder (DVR) is a class A device in accordance with EN 55022.
This device may cause interference to other equipment in domestic use. In such cases the persons opera-
ting the DVR are required to provide appropriate countermeasures, for which they themselves bear the cost.
►
►
Importance of these Operating Instructions
Please read the safety instructions and the other information contained in the Operating Instructions before
connecting up and operating the DVR.
The Operating Instructions should be kept in a safe place for later reference.
►
►
Ambient conditions for the DVR
The DVR should be protected against excessive heat, dust, damp and vibration.
The DVR may only be operated at temperatures between +5°C and +40°C, and up to a maximum air
humidity of 90%.
The DVR may only be operated indoors, and must be protected against incursion of water and damp.
►
►
►
Care of the DVR
Never switch on the DVR when damp has penetrated it. In such cases, have the DVR checked by a qualied
service engineer.
Do not place any heavy objects on the DVR.
Never cover over the DVR's vents.
Never insert metal objects or any other items into the vents. This may permanently damage the DVR.
The housing may only be opened by authorised persons. Repairs may only be carried out by qualied
service personnel.
The DVR must be disconnected from the power supply before its housing is opened.
►
►
►
►
►
►
Getting started with the DVR
When laying the connecting cables, make sure no weight is placed on them, that they are not kinked or
damaged, and that no damp can penetrate them.
►
Cleaning the DVR
The housing of the DVR may only be cleaned with a damp (not wet) cloth,
Use only a mild detergent. Do not use solvent-containing detergents or petrol. This could permanently
damage the surface nish.
►
►
Spare parts
Use only original spare parts from Videor E. Hartig GmbH.►
5
DPR-2016/500D
Table of contents
Overview 7
Package contents 7
Basic functions 7
Features 7
Requirements for operation 7
Control options 7
Connections on the rear 8
Front panel controls 10
Key to controls 12
Function buttons 12
PTZ camera functions 12
Playback functions 12
Remote control functions 13
Playback functions 13
Menu overview 14
Accessing the menus 16
Accessing the Display menu 16
Accessing the PTZ menu 16
Accessing the Setup menu 17
Accessing the Search menu 17
Getting started 18
Checklist for DVR operation 18
Connecting the remote control and DVR 18
Switching on the DVR 19
Switching off the DVR 19
Administration 20
Saving your system setup 20
Loading your system setup 20
Deleting recordings 21
Downloading software updates 21
Hiding from specic users 21
Restoring factory defaults 22
Changing hard disk 23
Fitting hard disk into an empty drive rack 24
Mirroring of hard disks 25
Determining the memory requirement of a recording 26
Searching for recordings 27
Using Bookmark search 29
Using calendar search 30
Using event log search 31
Using text-in search 32
Using motion search 33
Copying recordings 34
6DPR-2016/500D
Table of contents
Menu descriptions – Setup menu 35
System – Information 36
System – Date/Time 37
System – Storage 38
System – User 40
System – Shutdown 41
System – Log out user1... 41
Network – Network 41
Network – Notication 44
Devices – Camera 45
Devices – Alarm-Out 46
Devices – Display 47
Devices – Remote Control 48
Record – Record 49
Record – Schedule 50
Record – Pre-Event 51
Record – Archive 52
Event – Alarm-In 53
Event – Motion Detection 55
Event – Object Detection 57
Event – Video Loss 59
Event – Video Blind 61
Event – Text-In 63
Event – System Event 65
Event – Event Status 67
WebGuard – WebWatch controls 68
WebGuard – WebSearch controls 69
Using WebGuard 70
Specications DPR-2016 71
Accessories 73
Supported PTZ cameras 74
Index 76
Notes on disposal 79
7
DPR-2016/500D
Overview
Package contents
Digital video recorder (DVR)
Mains power cord
Operating instructions
RAS (Remote Administration System) software on CD
Operating instructions for RAS software on paper and CD
Mounting kit for cabinet installation
Screws for attaching SCSI Connector
Mounting screws for installation of hard disk drives
Infrared remote control
Key for hard disk drive rack
Basic functions
Record video images using multiple cameras
Event-based recording start
Video playback
Search for specic video sequences
Features
MPEG-4 compression / pentaplex mode
16 loop-through inputs / VGA, S-VHS/FBAS outputs
Audio and alarm inputs / outputs
Max. recording speed: 400 eld images per sec (PAL)2
Memory capacity 500 GB
4 hard disks max., CD/DVD-RW writer included
Standard hard disk mirroring
Maximum video resolution 720 x 576 pixels
SCSI port for archiving / memory expansion
Integral motion detector/object tracking
ATM/POS text display / 2x to 4x digital zoom
RS-232 / RS-485 ports
Network port (Ethernet) / IR remote control
Requirements for operation
Digital video recorder DTR connected
At least 1 camera connected
At least 1 monitor connected
Mouse connected, if DVR is to be controlled by mouse
Control options
Front panel
Remote Control
Mouse
WebGuard
RAS program
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
8DPR-2016/500D
Connections on the rear
Note: Connections optionally for NTSC or PAL operation.
1 2 3 4 5 6 7
1314 12 111920 161718 15 910 8
9
DPR-2016/500D
Connections on the rear (continued)
No. Designation Functions/connections Example devices
1 VIDEO IN 1-16 Max. 16 video channels Cameras
2 LOOP 1-16 Max. 16 loop-through video channels Cameras
3 AUDIO IN 1-16 Max. 16 Audio inputs Microphone
4 AUDIO OUT Audio output Amplier, speakers
5 SPOT1 - SPOT4 Max. 4 video outputs Spot monitors
6 SVHS OUT S-VHS output Monitors
7 VIDEO OUT Video output Monitors
8NC1 - NC4, C1 - C4,
NO1 - NO4 Relay alarm output for external device Siren, ashing light
9 VGA PC monitor PC monitor
10 SCSI External storage media Hard disk
11 AO1 - AO12 Alarm outputs for external devices Siren, ashing light
12 NETWORK Network Network cable
13 USB External interface Drive, mouse
14 ARI/GND Reset alarm with external signal Switch
15 RS-232C 2 external interfaces Modem
16 RS-485 2 external interfaces Keyboard, PTZ camera
17 Reset switch Reset to factory defaults -
18 AI1 - AI16 Alarm inputs for external devices Sensors
19 Power switch On/Off switch -
20 Power supply Mains power connection -
10 DPR-2016/500D
Front panel controls
The following diagram and table set out the controls on the front panel of the DVR:
17 15 1114 13 12
1 32 865 9 104 7
16
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Eneo DVR Handbücher
Eneo
Eneo Eneo DTR-6008/500CD Bedienungsanleitung
Eneo
Eneo DLR1.2/04&250DV Bedienungsanleitung
Eneo
Eneo HDR-5004AH Bedienungsanleitung
Eneo
Eneo MNR-18N04000A Bedienungsanleitung
Eneo
Eneo DTR-6008/250CD Bedienungsanleitung
Eneo
Eneo HDR-4008AE3.0 Bedienungsanleitung
Eneo
Eneo TVR-2008AM1.0 Bedienungsanleitung
Eneo
Eneo H.264 Video Compression Bedienungsanleitung
Eneo
Eneo INR-18N040005A Bedienungsanleitung
Eneo
Eneo HDR-4004AM1 Bedienungsanleitung
Eneo
Eneo MSR-24N080004A Bedienungsanleitung
Eneo
Eneo MER-28N040000A Bedienungsanleitung
Eneo
Eneo DLR-2116/1.0TBV Bedienungsanleitung
Eneo
Eneo TVR-2008AM4.0 Bedienungsanleitung
Eneo
Eneo DLR-2104/1.0TBV Bedienungsanleitung
Eneo
Eneo DMR-5008/500 Bedienungsanleitung
Eneo
Eneo IER-25R040004A Bedienungsanleitung
Eneo
Eneo BLR-3004 Bedienungsanleitung
Eneo
Eneo DLR-2116 Gebrauchsanweisung
Eneo
Eneo MNR-18N04000A Bedienungsanleitung
