EPOX EP-BXBS Bedienungsanleitung

TRADEMARK

All products and company names are trademarks or registered

trademarks of their respective holders.

These specifications are subject to change without notice.

Manual Revision 1.1

July 15, 1999

EP-BXBS (SMP)

A Dual Pentium®II Processor based

AGP mainboard (100/66MHz) with

Adaptec Ultra-2 SCSI onboard.

EP-BXBS

Technical Support Services

If you need additional information, help during installation or normal use of this

product, please contact your retailer. If your retailer can not help, you may E-Mail us

with any questions at the following address [email protected]

Record your serial number before installing your EP-BXBS mainboard. (the serial

number is located near the ISA slots at the edge of the board)

The EP-BXBS serial number:

__________________________

BIOS and Driver Upgrades

Please visit our websites for BIOS and driver upgrades.

North American Website (English)

http://www.epox.com

[email protected]

Taiwan Website (Chinese)

http://www.epox.com.tw

[email protected]

Thank you for using EPoX mainboards!

EP-BXBS

User Notice

No part of this product, including the product and software may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language

in any form by any means without the express written permission of EPoX Computer

Company (hereinafter referred to as EPoX) except documentation kept by the

purchaser for backup purposes.

EPoX provides this manual “as is” without warranty of any kind, either express or

implied, including but not limited to the implied warranties or conditions of merchant-

ability or fitness for a particular purpose. In no event shall EPoX be liable for any

loss or profits, loss of business, loss of use or data, interruption of business or for

indirect, special incidental, or consequential damages of any kind, even if EPoX has

been advised of the possibility of such damages arising from any defect or error in

the manual or product. EPoX may review this manual from time to time without

notice. For updated BIOS, drivers , or product release information you may visit

EPoX’s home page at: http://www.epox.com

Products mentioned in this manual are mentioned for identification purposes only.

Product names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies.

The product name and revision number are both printed on the mainboard

itself.

Handling Procedures

Static electricity can severely damage your equipment. Handle the EP-BXBS

and any other device in your system with care and avoid unneccessary contact with

system components on the mainboard.

Always work on an antistatic surface to avoid possible damage to the motherboard

from static discharge.

We assume no responsibility for any damage to the EP-BXBS mainboard that results

from failure to follow installation instructions or failure to observe safety precautions.

CAUTION

TheEP-BXBS mainboardissubjectto

damageby static electricity. Always

observethehandlingprocedures.

EP-BXBS

Table of Contents

Section 1 Introduction

ComponentsChecklist .................................... 1-1

Overview

PentiumII....................................................... 1-2

S.E.C.CartridgeTerminology ......................... 1-3

SMP .............................................................. 1-4

AcceleratedGraphicsPort .............................. 1-5

HardwareMonitoring ..................................... 1-5

Adaptec SCSI................................................ 1-5

EP-BXBS ...................................................... 1-6

I/OShieldConnector...................................... 1-7

Power-On/Off(Remote)................................. 1-7

SystemBlockDiagram ................................... 1-8

Section 2 Features

EP-BXBS ...................................................... 2-1

Section 3 Installation

EP-BXBSDetailedLayout ............................. 3-2

Easy Installation Procedure

ConfigureJumpers .......................................... 3-3

SystemMemoryConfiguration ........................ 3-5

InstallingaPentium®IIProcessor .................... 3-8

DeviceConnectors ......................................... 3-10

External Modem Ring-in Power ON and Keyboard

Power On Function (KBPO) .......................... 3-12

Adaptec SCSI setup....................................... 3-14

Section 4 Award BIOS Setup

BIOSInstructions ........................................... 4-1

Standard CMOS Setup .................................. 4-2

EP-BXBS

BIOS Features Setup ..................................... 4-3

ChipsetFeatures Setup ................................... 4-8

PowerManagementSetup .............................. 4-13

PNP/PCIConfiguration .................................. 4-17

IntegratedPeripherals ..................................... 4-19

Change Supervisor or User Password ............. 4-24

IDEHDDAutoDetection............................... 4-25

HDDLowLevelFormat................................. 4-27

Save& ExitSetup .......................................... 4-27

ExitWithoutSaving......................................... 4-27

Section 5 Adaptec SCSI BIOS

SCSIBIOS Instructions ..................................5-1

Configuration/ViewHostAdapterSettings........5-2

BootDeviceConfiguration ...............................5-3

SCSIDeviceConfiguration ..............................5-4

AdvancedConfigurationOptions .....................5-5

SCSIDiskUtilities...........................................5-7

Section 6 Appendix

Appendix A

MemoryMap ................................................. A-1

I/O Map......................................................... A-1

Timer & DMAChannels Map......................... A-2

InterruptMap ................................................. A-2

RTC & CMOS RAM Map ............................ A-3

Appendix B

POST Codes ................................................. A-5

UnexpectedErrors ......................................... A-8

Appendix C

LoadSetupDefaults ....................................... A-9

Appendix D

CPU Clock Frequency selection in BIOS........ A-11

IntroductionEP-BXBS

Page 1-1

Section 1

INTRODUCTION

Components Checklist

üü

üA. (1) EP-BXBSmainboard

üü

üB. (1) EP-BXBSuser’smanual

üü

üC. (1) Floppy ribbon cable

(1) IDE Hard drive ribbon cable

üü

üD. (1) SCSI 50-pincable

(1) SCSI Ultra68-pin cable

(1) SCSIUltra-2(LVD)68-pin cable withterminator

üü

üE. (2) Retention Module

üü

üF. (1) External SCSI-2 port adapter

üü

üG. (1) IDE Bus master drivers

(4) SCSI drivers

(1) USDM software (option)

USERS

MANUAL

EP-BXBS

COM 1COM 2

PS/2

USB

Parall el Port

Ultra-2SCSI

Wide SCSI

Narrow SCSI

Introduction EP-BXBS

Page 1-2

Overview

Pentium II

The Pentium®II Processor is the follow-on to the Pentium®Processor. The

Pentium®II Processor, like the Pentium®Pro processor, implements a Dynamic

Execution micro-architecture -- a unique combination of multiple branch prediction,

data flow analysis, and speculative execution. This enables the Pentium®II Proces-

sor to deliver higher performance than the Pentium®processor, while maintaining

binary compatibility with all previous Intel architecture processors.

A significant feature of the Pentium®II Processor, from a system perspective, is the

built-in direct multiprocessing support. In order to achieve multiprocessing, and

maintain the memory and I/O bandwidth to support it, new system designs are

needed. For systems with dual processors, it is important to consider the additional

power burdens and signal integrity issues of supporting multiple loads on a high speed

bus. The Pentium®II Processor card supports both uni-processor and dual processor

implementations.

The Pentium®II Processor utilizes Single Edge Contact (S.E.C.) (Figure 1) cartridge

packaging technology. The S.E.C. cartridge allows the L2 cache to remain tightly

coupled to the processor, while maintaining flexibility when implementing high perfor-

mance processors into OEM systems. The second level cache is performance

optimized and tested at the cartridge level. The S.E.C. cartridge utilizes surface

mounted core components and a printed circuit board with an edge finger

connection. The S.E.C. cartridge package introduced on the Pentium®II Processor

will also be used in future Slot 1 processors.

The S.E.C. cartridge has the following features: a thermal plate, a cover and a PCB

with an edge finger connection. The thermal plate allows standardized heatsink

attachment or customized thermal solutions. The thermal plate enables a reusable

heatsink to minimize fit issues for serviceability, upgradeability and replacement. The

full enclosure also protects the surface mount components. The edge finger connec-

tion maintains socketabilty for system configuration. The edge finger connector is

denoted as ‘Slot 1 connector’ in this and other documentation.

The entire enclosed product is called the Pentium®II Processor. The packaging

technology and each of the physical elements of the product are referred to using

accurate technical descriptions. This allows clear reference to the products as just a

processor. This is the model used in past packaging technologies like PGA, TCP,

PQFP, DIP, etc.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere EPOX Hauptplatine Handbücher

EPOX

EPOX MVP4M Bedienungsanleitung

EPOX

EPOX EP-3VB Bedienungsanleitung

EPOX

EPOX KP6-LA Bedienungsanleitung

EPOX

EPOX 6WEA4I Bedienungsanleitung

EPOX

EPOX P55-BT Bedienungsanleitung

EPOX

EPOX EP-BX7+ Bedienungsanleitung

EPOX

EPOX EP-MVP3G-M Bedienungsanleitung

EPOX

EPOX MVP4A Bedienungsanleitung

EPOX

EPOX MU-8KHA Bedienungsanleitung

EPOX

EPOX 9npa Bedienungsanleitung

EPOX

EPOX EP-3WEF2 Bedienungsanleitung

EPOX

EPOX P55-TX 2 Bedienungsanleitung

EPOX

EPOX MVP4F Bedienungsanleitung

EPOX

EPOX nForce2 Ultra 400 Bedienungsanleitung

EPOX

EPOX EP-3VBA2 Bedienungsanleitung

EPOX

EPOX EP-D3VA Bedienungsanleitung

EPOX

EPOX An Intel Socket 478 Processor Based Mainboard... Bedienungsanleitung

EPOX

EPOX EP-8KTA Bedienungsanleitung

EPOX

EPOX EP-3VBA Bedienungsanleitung

EPOX

EPOX ProNiX EP-9NPAJ Bedienungsanleitung

EPOX

EPOX LX370Y Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

EPOX

EPOX EP-BX5C Bedienungsanleitung

EPOX

EPOX EP-68LXR Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung