Handicare RiseAtlas450T Bedienungsanleitung

RiseAtlas450T/625T is a safe and easy-to-use stationary ceiling lift unit which can be used in all settings and in all types

of rooms, both on permanent rail systems and on portable, freestanding lift stands. When used with the appropriate

lifting accessories, RiseAtlas450T/625T provides secure, comfortable and individually adapted lifting of users in

connection with seated or horizontal transfers to and from the bed, wheelchair or toilet.

RiseAtlas450T/625T offers a large lifting area and the possibility of both very low and very high lifting, making it an excellent

solution also for lifting from the floor and for gait training and standing training. RiseAtlas450T/625T can also be used for

convenient transfer of users from one room to another. RiseAtlas450T/625T is equipped with a built-in transfer motor.

Manual nr: 707-ML Rev 9 Aug 2020

User manual - English

SWL:

RiseAtlas450T: 205 kg/450 lbs

RiseAtlas625T: 285 kg/625 lbs

Visual inspection

Inspect lift functions regularly. Check to ensure that product is free from damage.

Before use

Ensure that the product is correctly mounted in the trolley.

Check rail end stops.

Check sling bar connection and safety latch function.

Check lifting movement.

Inspect the lift for signs of wear and damage.

Check the hand control cable for signs of wear.

Check to ensure that hand control markings coincide with lift functions.

Check battery charge level.

Always read the user manuals for all assistive devices used during a transfer.

Keep the user manual where it is accessible to users of the product.

Under no circumstances may the lift be used by persons who have not received instruction in the operation of the lift.

It is strongly prohibited to modify the original product.

Functional inspection

Always read the user manual

RiseAtlas450T

RiseAtlas625T 50100058 (RiseAtlas450T)

50100060 (RiseAtlas625T)

SystemRoMedicTM

Table of contents

Installation.................................................................................... 3-9

- Unpacking and check............................................................................. 3

- Transport and storage............................................................................ 3

- Installing the lift unit........................................................................... 3-4

- Charging the lift unit........................................................................... 5-8

- Different rail systems............................................................................. 9

- Final inspection..................................................................................... 9

Using the product ...................................................................10-15

- Important information ..........................................................................10

- Before use ...........................................................................................10

- Safe working load ................................................................................11

- Description of functions and symbols .....................................................11

- Hand control ........................................................................................12

- Information panel.................................................................................13

- Preventive service maintenance.............................................................13

- Emergency stop ...................................................................................14

- Electrical emergency lowering ...............................................................14

- Manual emergency lowering/raising.......................................................14

- Trouble-shooting ..................................................................................15

Accessories....................................................................................16

Maintenance..................................................................................17

Technical information ...............................................................18

- Detailed description..............................................................................18

2USER MANUAL SystemRoMedicTM

Installation

Unpacking and check

With RiseAtlas, the following is included in the package:

1 RiseAtlas lift unit

1 Hand control

2 Manuals - User manual, Assembly instructions for fuse

1 Charger station

1 Manual emergency lowering key

Check to ensure that no components are left in the packaging.

Inspect the lift unit for signs of damage.

Installing the lift unit

NOTE! The lift unit and carriage must be installed and inspected by authorized personnel according to instructions issued

by Handicare. Periodic inspection must be performed at least once yearly. Use only original spare parts. Service and

maintenance must be performed according to instructions in the user manual.

The lift must be charged for at least 3 hours before it is used for the first time. The lift unit is shipped with the fuse

removed. Prior to installation the cover is removed and a 20A fuse is inserted. The fuse is packed in a bag. As standard,

the lift is factory pre-set for charging at a charger station. When installing the lift unit for in-rail charging on the rail system,

the system must be fitted with charger rails. Exercise caution when installing the lift unit, so that the charger wheels do

not come in contact with the rail, since this may cause short-circuiting. Incorrect installation may cause short-circuiting

and damage the charger.

Alteration of the charging method must be performed by authorized

personnel according to instructions issued by Handicare.

Transport and storage

Before shipping, the fuse is removed to prevent battery discharge during transport or long-term storage.

Install the fuse in the lift unit according to the accompanying instructions.

USER MANUAL

SystemRoMedicTM

180 cm

Emergency Stop Strap

When the lift is correctly installed in the trolley system, the emergency

stop strap needs to be adjusted. The emergency stop strap is cut at a

height where the strap doesn´t interfere with a normal lifting situation but

at the same time is easily reached by all users.

The strap is cut with scissors and singed at the end as to prevent unravel.

Handicare recommends a height of 180 cm/70 inches above the floor.

Assembly of charger unit

The following is included in the charger station package:

• Holder

• Charger cup

Charger cable (EU, UK, US connectors included)

(fixtures between charger station and wall/freestanding rail not included)

Charger station

a) Secure holder to charger station on wall/freestanding rail system. Recommended height

is 110-120 cm from floor.

b) Mount the charger cable. If necessary mount the cover for the charger.

c) Connect the accompanying hand control to the charger station and the hand control

cable to the lift unit. Check charger function.

4USER MANUAL SystemRoMedicTM

Charging the lift unit

RiseAtlas can be used with three different charging systems:

1. Charger station for charging via hand control (Standard)

2. In-rail charging (Accessory)

3. End-point charging (Accessory)

RiseAtlas is charged with a charger unit that is connected to the charger cables via a DC outlet. The charger should be

kept in an appropriate location. Note that the charger is a separate unit and can be easily mistaken for another charger.

Ensure that the correct charger is used, see Technical information. For assembly instructions, see Assembly of charger unit.

1) The lift unit is charged via a wall-mounted charger station. Place the hand

control in the charger station. The charging lamp on the lift unit indicates charging

for 15 minutes after being activated. Charging continues until the battery is fully

charged.

2) For in-rail charging, the lift unit is always kept charged, which means that it can

be left anywhere on the rail and will charge automatically.

3) For end-point charging, the lift unit is placed at the charger station at the end

of the rail. If the rail system is of the traverse type, the secondary rail is placed at

the end of the primary rail at which the charger station is located. Check to ensure

that the battery symbol on the lift unit lights up.

USER MANUAL

SystemRoMedicTM

Alternative 2: In-rail charging (Accessory)

If the in-rail charging option is chosen, the lift unit must be fitted with a charger contact (70200062) and charger rails

before installation. The charger that is included with the lift unit is used.

Alteration of the charging method must be performed by authorized

personnel according to instructions issued by Handicare.

1) Set the charging points for in-rail charging; the charger plate is not secured with the spring pins, see figure 1. To set

the charging points for in-rail charging, remove the spring pins that hold the charger plate in place. Then, the dip switch

on the circuit board is set for the desired charging function.

2) Check to ensure that the charger plate springs in and out when pressure is applied to the charger plate, see

figure 2.

3) Check to ensure that charger rails have been installed (installation of charger rails is described in the installation

manual for MilkyWay).

4) Guide the lift unit onto the rail so that the plus on the charging point is on the right side, according to figure 3.

5) Connect the red cable to the charger rail on the right side, the charger plate’s plus side (positive), and the black cable

on the left side (negative), according to figure 4.

6) Install the end-stop on the rail.

1 2

NOTE! No spring pin

+ Plus

6USER MANUAL SystemRoMedicTM

1 2

Alternative 3: End-point charging (Accessory)

If the end-point charging option is chosen, the lift unit must be fitted with a charger contact (70200062). The charger that

is included with the lift unit is used.

1) Check to ensure that the charging points are set for the charger station; the charger plate is secured with the spring

pins, see figure 1.

2) Check to ensure that the charger plate springs in and out when pressure is applied to the charger plate, see figure 2.

3) Guide the lift unit onto the rail so that the plus on the charging point is on the right side, according to figure 3.

4) Mount charger contacts according to figure 4. NOTE! Push the charger contact (A) in about 50 mm if only a stop bolt

is used. When an adjustable end-stop is used, the charger contact is pushed in about 90 mm.

5) Affix the accompanying screws for charger contacts, see figure 5 (B).

6) Connect the red cable to the charger contact on the right side, the charger plate’s plus side (positive), and the black

cable on the left side (negative), according to figure 6.

7) Install the end-stop on the rail.

Spring pin

+ Plus

USER MANUAL

SystemRoMedicTM

Battery status, charger station

• The battery symbol lights green when battery capacity exceeds 50 %.

• If the battery symbol blinks orange when the lift unit is started, the battery needs to be charged.

• If the battery symbol lights orange and a beep is heard when the lift unit is run up, the battery needs to

be charged immediately.

• When the lift unit is started the battery symbol lights up for 2 seconds to indicate the current battery

status.

• Six seconds after every operation the battery symbol lights for 2 seconds to indicate the current

battery status. Only hand control charging or end point charging mode.

Charging indication (hand control charging and end point charging)

When the hand control is placed in the charger station 2 beep sounds are heard and

the green light should stay on for 15 minutes.

Battery status, in-rail charging

The battery symbol lights green when battery capacity exceeds 50%.

When the lift unit is activated the battery symbol lights green for 15 minutes.

If the battery symbol and the book symbol blink orange when the lift unit is started, the circuit for the charging

system has been broken and must be checked by a technician.

Active charging detection (In-rail charging)

After activation the lift unit will light the battery symbol for 15 minutes and after 4 minutes the charger should turn

on. If the lift unit is missing the charger it will start indicate after 4 minutes. Green 15 minutes after activation.

NOTE!

Use only the charger that is intended for the lift unit.

For maximum service life, charge batteries regularly. Do not allow the battery charge level to fall below 25%

(orange symbol on control panel).

Emergency stop must not be activated during charging.

Batteries may only be replaced by authorized personnel.

8USER MANUAL SystemRoMedicTM

Final inspection

• The RiseAtlas lifting unit must be installed and first-time inspected by authorized personnel (inspector) in accordance

with the installation instructions provided by Handicare. Periodic inspection of the equipment should be undertaken at

least once a year. Original spare parts should be used and service/maintenance of the equipment should be in accor-

dance with the user manual.

• Check to ensure that no parts have been left in the packaging.

• Check to ensure that the lift has no signs of damage from transportation.

• Check to ensure that the emergency stop is functioning by pulling the emergency stop strap, and then pressing the UP

or DOWN button. If nothing happens, the emergency stop is working properly.

• Check the entire length of the strap for signs of damage and inspect seams for wear. Press the up button and run the

strap all the way up. Then, press the down button and run the strap all the way down.

• Test lift function by lifting a person (not a user) using an approved lifting sling. At the same time, check both the user

manual and electrical emergency lowering function with someone in the lift. See section on Emergency lowering.

• Check to ensure that the rail system is equipped with end stops.

• Check the hand control cable for signs of wear.

• Check to ensure that hand control markings coincide with lift functions.

• The user/attendant shall always pay attention to and report any unusual noises or vibration of the equipment.

NOTE!

Before the lift is used for the first time it must be charged for at least 3 hours. See section on charging the lift.

RiseAtlas is shipped with the emergency stop activated to prevent battery discharge during transport or long-term

storage.

Always keep the key for the emergency lowering close to the lift.

All personnel who use the lift must be informed of where the key is kept.

Different rail systems

The choice of rail system is determined by the lifting needs at hand.

Basic rail systems,

with curves and turn table

Rail system with full room coverage,

above bathroom wall

Freestanding lift stand

USER MANUAL

SystemRoMedicTM

Before use

- Ensure that the product is correctly mounted in the trolley.

- Check rail end stops.

- Check sling bar connection and safety latch function.

- Check lifting movement.

- Inspect the lift for signs of wear and damage.

- Check the hand control cable for signs of wear.

- Check to ensure that hand control markings coincide with lift functions.

- Check battery charge level.

Using the product

Important information

• The user/attendant shall be trained professional with thorough understanding of the equipment and lifting of disabled

persons. It is important that proper accessories and techniques are used by the user/attendant and it is also very

important that a user never is left unattended in a lifting situation.

• Warranty does only apply if repairs or alterations are made to the lift by personnel who are authorized.

• RiseAtlas must not come in direct contact with water.

• RiseAtlas must not be charged in a wet room.

• To ensure optimal function, the lift must be inspected regularly. See section on Maintenance.

• Under no circumstances may safe working load be exceeded. See section on Technical information and the product

label on the lift.

• Lifting accessories must be properly trial fitted and tested in relation to the user’s needs and functional ability.

• Particular care must be taken when using the equipment near strong sources of interference, such as diathermy

apparatus, so that e.g., diathermy cables and similar equipment are not placed near the device. When in doubt, consult

your equipment technician or the supplier.

10 USER MANUAL SystemRoMedicTM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Handicare Medizinische Geräte Handbücher

Handicare

Handicare SystemRoMedic SupportStraps Bedienungsanleitung

Handicare

Handicare MiniLift125 Bedienungsanleitung

Handicare

Handicare SystemRoMedic EasyGlide Series Bedienungsanleitung

Handicare

Handicare 201040314 Bedienungsanleitung

Handicare

Handicare SystemRoMedic TurnTable Bedienungsanleitung

Handicare

Handicare SystemRoMedic HygieneSling Bedienungsanleitung

Handicare

Handicare LI2613.000 Series Bedienungsanleitung

Handicare

Handicare 1000 Smart XL Bedienungsanleitung

Handicare

Handicare TopSheet 1510 Bedienungsanleitung

Handicare

Handicare LI2490.125 Series Bedienungsanleitung

Handicare

Handicare LI2634.000 Series Bedienungsanleitung

Handicare

Handicare SystemRoMedic SoftLegSupport Bedienungsanleitung

Handicare

Handicare LI2513 Bedienungsanleitung

Handicare

Handicare SystemRoMedic RiseAtlas450M... Bedienungsanleitung

Handicare

Handicare Eva400 Bedienungsanleitung

Handicare

Handicare SitWalk Bedienungsanleitung

Handicare

Handicare SystemRoMedic MiniLift160EE Bedienungsanleitung

Handicare

Handicare SystemRoMedic EasyBelt Bedienungsanleitung

Handicare

Handicare PRISM MEDICAL C450 Bedienungsanleitung

Handicare

Handicare SystemRoMedic WendyLett Bedienungsanleitung

Handicare

Handicare LI2214.201 Series Bedienungsanleitung

Handicare

Handicare SystemRoMedic LiftSeat Bedienungsanleitung

Handicare

Handicare MilkyWay SystemRoMedic Bedienungsanleitung

Handicare

Handicare SystemRoMedic RiseAtlas450 Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung