Handicare SystemRoMedic MiniLift160EE Bedienungsanleitung

Manual nr: 450 ver. 10 151210

MiniLift160EE/MiniLift160EM

SystemRoMedicTM

SWL: 160 kg/350 lbs

REVISION HISTORY

REV.

DESCRIPTION

DATE

APPROVED

This drawing and any information or descriptive matter set out hereon are the confidential and copyright property of Handicare

and must not be disclosed, loaned, copied or used for manufacturing, tendering or any other purpose without their written permission.

SCALE

PROJECTION

Material <not specified>

MATERIAL SPECIFICATION:

2015-03-13

38130.55 g

90003418

MiniLift 160EE

Released

SIZE

MATERIAL:

TITLE

STATUS

WEIGHT:

SHEET 1 OF 1

CREATED

DATE

NAME

REV.

DWG. NO.

1:20

60300010

60300011

60300012

60300013

MANUAL

SystemRoMedicTM

English

MiniLift160 is a mobile sit-to-stand lift which has been developed to, as gently as possible, assist the user when rising

from a sitting to a standing position. When MiniLift160 is combined with the appropriate lifting accessories, the user gets

support under the feet, for the front of the lower legs and behind the back, which provides for a safe and secure

sit-to-stand procedure. The construction safely moves the user forwards and upwards in a natural movement pattern

and, at the same time, the leg muscles and balance is exercised. MiniLift160 is available in four variants with electrical

(EE) or manual (EM) base widening and with standard height or low legs for use with lower beds. All variants are

manufactured in steel for stability and strength and are suitable for users weighing up to 160 kg/350 lbs.

1. Lift arm

2. Hooks for lift vest/sling

3. Hand control

4. Leg support

5. Footplate

6. Rear castos with brakes

7. Battery

8. Emergency stop

9. Adjustment of leg support

10. Electrical emergency lowering

11. Charging lamp

12. Front castors

13. Locking mechanism for adjustment of lift arm

14. Base-width adjustment

REVISION HISTORY

REV.

DESCRIPTION

DATE

APPROVED

This drawing and any information or descriptive matter set out hereon are the confidential and copyright property of Handicare

and must not be disclosed, loaned, copied or used for manufacturing, tendering or any other purpose without their written permission.

SCALE

PROJECTION

Material <not specified>

MATERIAL SPECIFICATION:

2015-03-13

38130.55 g

90003418

MiniLift 160EE

Released

SIZE

MATERIAL:

TITLE

STATUS

WEIGHT:

SHEET 1 OF 1

CREATED

DATE

NAME

REV.

DWG. NO.

1:20

810

MiniLift160EE/MiniLift160EM

SystemRoMedicTM

Visual inspection

Inspect lift functions regularly. Check to ensure that material is free from damage.

Before use

Make certain the lift is properly assembled.

Check sling bar connection and safety latch function.

Check lifting function and base-width adjustment.

Check to ensure that the actuator is correctly installed.

Always read the user manuals for all assistive devices used during a transfer.

Keep the user manual where it is accessible to users of the product.

Always make sure that you have the right version of the user manual.

Under no circumstances may the lift be used by persons who have not received instruction in the operation of the lift.

It is strongly prohibited to modify the original product.

Safety information

Always read the user manual

English

4MANUAL SystemRoMedicTM

Assembly

Check to ensure that all components are included:

Lift unit, control box and battery pack, undercarriage, footplate, leg support, hand control and cord, user manual and

charger.

The lift is collapsed when delivered. Set up the lift, according to the following instructions

(no tools required):

1. Lock castor brakes.

2. Place the mast in the base

3. Mount the lockninghandles at the base of the mast.

4. Tighten locking handle (1).

5. Check all mounting fixtures and locking handles.

6. Deactivate the emergency stop function and perform a final inspection (see Final

inspection).

Connect cables: Hand control cord in HS, cable to lift unit on mast in outlet M1, and

cable to base-width motor in outlet M2. (EE)

To collapse the lift, follow the instructions below.

1. Lock castor brakes.

2. Change the base width pedal to horizontal.

3. Remove legsupport and footplate.

4. Run the lift arm to the lowest position, and then activate in the emergency stop button.

5. Push the lift arm in as far as possible.

6. Loosen the locking handle at the base of the mast (1). You need not remove the locking handle.

7. Lift up on the mast and lower it towards the undercarriage.

Warning, risk of pinching (between base and mast)

8. Pull the mast back and tighten the locking handle (1).

HS M1 M2

MANUAL

SystemRoMedicTM

Final inspection

Inspect the lift for signs of wear and damage. Check all castors and castor brakes.

Check all connections and fixtures including screws and bolts. Check the packaging to

ensure that there are no loose parts.

Check the emergency stop function by activating the emergency stop button, and

then pressing either the up or down button. If nothing happens when the up or down

buttons are pressed, the emergency stop is functioning properly.

Grasp the hand control, press the up button and run the lift arm all the way up. Then,

press the down button and run the liftarm all the way down.

Test base-width adjustment function by pushing down on the respective pedals for

widening and narrowing the base. For EE use the buttons on the hand control.

Test lift function by lifting a person (not a user) using an approved sling. At the same

time, check the emergency lowering function with someone in the lift, see section on

Emergency lowering.

If the lift is functioning correctly, connect the charger and check to ensure that the

charging lamp on the control box lights up.

NOTE!

Before the lift is used for the first time:

• it must be charged for at least 4 hours. See section on charging batteries.

• the control box service counter needs to be reset. To reset the service counters

press both lift buttons on the hand control at the same time for 5 seconds.

An audio signal will indicate that the timer has been reset.

Keep the user manual where it is accessible to users of the product.

English

6MANUAL SystemRoMedicTM

• The lift must be assembled according to the assembly instructions provided with the lift.

• The lift may only be used indoors and on a level floor.

• Lifting accessories must be properly trial fitted and tested in relation to the user’s needs and functional ability.

• Do not leave the user unattended during a transfer situation.

• Under no circumstances may max. load be exceeded. See section on Safe working load.

• The lift arm must be loaded throughout the entire lowering procedure to ensure a soft and smooth experience.

• Ensure that the user’s feet do not get caught between the footplate and the floor. Ensure that the user’s feet do not get

caught between the footplate and the base when adjusting the base width.

• MiniLift160 is not intended for transporting users. It may only be used for short transfers.

• Never move the lift by pulling on the actuator!

• The lift must not be used or immersed in or under water including showering.

• The lift should not be left / stored in a high humidity environment.

• The lift must not be charged in a wet room.

• To ensure optimal function, the lift must be inspected regularly. See section on Maintenance.

• Warranty applies only if repairs or alterations are done by an authorized technician.

• Using lifting accessories other than those approved by Handicare can entail a risk.

• Note the risk of pinching between base and mast when collapsing the lift.

Do not push

Important Information

Safe working load

Different products on the same lift system (lift unit, sling bar, sling, scales and other lifting accessories) may have different

allowable safe working loads. The lowest allowable safe working load always determines the safe working load of the

assembled system. Always check the safe working loads for the lift and accessories before use. Contact your dealer if

you have any questions.

Using the product

To transfer with MiniLift160, the user must be able to:

• support weight while standing

• understand instructions

MANUAL

SystemRoMedicTM

Charging batteries

A tone sounding when using the lift indicates that the battery need recharging.

Charge the lift after use to ensure that the battery is always fully charged.

Lock the castor wheels when charging the battery.

1. Connect the charging cable to a power outlet and in the connection for charger cable.

The symbol for charging is shown on the display.

2. Check to ensure that the lamps on the control box light up. The green LED lamp

indicates that the charger is receiving power and the yellow LED lamp indicates that the

battery is charging.

3. Charging stops automatically when the battery is fully charged.

Wall-mounted charger.

1. Remove the battery pack from the lift and place it in the wall-mounted charger.

2. Check to ensure that the LED lamp on the front of the charger lights up.

NOTE!

Before the lift is used for the first time, it must be charged for at least 4 hours.

For maximum battery life, charge batteries regularly. We recommend daily charging when

the lift is used daily.

The emergency stop must be deactivated during charging.

The control box and battery have the following features

1. Emergency stop

2. Charging lamps

3. Display showing battery charge level

4. Connection for charger cable

5. Connection for base-width adjustment motor

6. Connection for lift arm actuator

7. Connection for hand control

8. Electrical emergency lowering

9. Handle for lifting battery

English

8MANUAL SystemRoMedicTM

Service information read-out

Basic service information can be read out on the display. To get the service information on the

display please press the lifting arm up button for half a second. The information will be shown

for ½ minute or until other buttons are activated.

• Total cycles done by the actuator

• Total work done by the actuator (ampere usage times seconds in use)

• Total number of overloads

• Days since last service/Days between services

Battery information on the display

The battery discharging will be shown in four stages:

Battery state 1: The battery is ok, no need for charging (100 - 50 %).

Battery state 2: Battery needs charging. (50 - 25 %)

Battery state 3: Battery needs charging. (Less than 25 %) A tone sounds when a button is pressed in

this battery state.

Battery state 4: The battery needs charging (17V or lower). At this stage some of the functionality of

the lift is lost. At this battery stage it is only possible to drive the lifting arm down. Furthermore an

audio signal will sound when a control button is activated. The symbol will switch between the two

pictures for 10 seconds.

The battery symbol is shown when the box is active until power down (2 minutes after use).

It is not possible to use other batttery types than BAJ1/BAJ2.

The battery level is measured via voltage level. This means that it is possible to experience e.g. that

the battery switches from state 1 to state 2 and back to state 1.

MANUAL

SystemRoMedicTM

Hand control

Raising/lowering the lift arm

Symbol indicate direction of travel.

Motion stops as soon as the button is released.

Electrical base-width adjustment (EE)

Markings on the buttons of the hand control indicate function.

Motion stops as soon as the buttons are released.

Manual base-width adjustment (EM)

Push down on the respective pedals at the back of

the lift to widen and narrow the base.

Emergency stop

To activate emergency stop

Activate the red emergency stop button on the control box.

Resetting

Turn the button in the direction of the arrows until the button pops out.

Emergency lowering

Manual emergency lowering

For manual emergency lowering, turn the round plastic knob

on the actuator clockwise.

Electrical emergency lowering

For electrical emergency lowering, use the down button on

the control box. Use a narrow object such as a pen.

Eva450EEL Eva600EEL

Eva450EML

REVISION HISTORY

REV.

DESCRIPTION

DATE

APPROVED

SCALE:1:10

DWG. NO.

REV.

NAME

DATE

DRAWN

APPROVED BY

SHEET 1 OF 1

WEIGHT:

COMMENTS:

STATUS:

TITLE

MATERIAL:

SIZE

Released

EVA EEL 450 base

90001288 02

2011-05-20

Unless otherwise stated, general

tolerances according to ISO 2768-m

hc-jope

This drawing and any information or descriptive matter set out hereon are the confidential and copyright property of Handicare

and must not be disclosed, loaned, copied or used for manufacturing, tendering or any other purpose without their written permission.

Electrical emergency

lowering

Manual emergency

lowering

English

10 MANUAL SystemRoMedicTM

Instructions for use

These instructions must be followed for correct use of MiniLift160.

Caution

The actuator does not lower the lift arm when the lift is being lowered. This reduces the risk of the user being pinched by

the lift arm. To prevent the lift arm from at first catching, and then suddenly fal the lift arm must be loaded throughout the

entire lowering procedure, so that it is always supported by the actuator.

Hand control functions

The hand control has four functions: up and down (lift arm), out and in (base width).

Two functions cannot be used at the same time.

NOTE: The hand control functions do not operate if the emergency stop button is activated

NOTE: MiniLift160 is not intended for transporting users. It may only be used for short transfers.

Caution Never move the lift by pulling on the actuator.

Caution Ensure that the user’s feet do not get caught between the footplate and the floor. Ensure that the user’s feet do

not get caught between the footplate and the base when adjusting the base width.

MANUAL

SystemRoMedicTM

Using MiniLift160

Place an appropriately sized ThoraxSling behind and below the user’s hips,

(see user manual for ThoraxSling). (1)

When the user has placed his/her feet on the footplate, move the lift forward

towards the user. Place the lift as close as possible to the user. Take care to

ensure that the user’s shins are resting securely against the leg support, and

then adjust (2) the leg support so that it does not press against the user’s

kneecaps (about 2 cm lower). (3)

Raise the locking handle (4) on the lift arm and pull the lift arm out as far as

possible towards the user.

Select the sling loop that reaches the hook on the boom (shortest loop

alternative). Hook the lift loops to the underside of the sling bar. (5)

English

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Handicare Medizinische Geräte Handbücher

Handicare

Handicare 201903314 Bedienungsanleitung

Handicare

Handicare SystemRoMedic TurnTable Bedienungsanleitung

Handicare

Handicare SystemRoMedic RiseAtlas450M... Bedienungsanleitung

Handicare

Handicare RiseAtlas450T Bedienungsanleitung

Handicare

Handicare SystemRoMedic LiftSeat Bedienungsanleitung

Handicare

Handicare MiniLift125 Bedienungsanleitung

Handicare

Handicare 3309320 Bedienungsanleitung

Handicare

Handicare LI2601.050 Series Bedienungsanleitung

Handicare

Handicare SystemRoMedic HygieneSling Bedienungsanleitung

Handicare

Handicare SystemRoMedic AmpSling Series Bedienungsanleitung

Handicare

Handicare Xclusive Bedienungsanleitung

Handicare

Handicare LI2611.011 Series Bedienungsanleitung

Handicare

Handicare SystemRoMedic Series Installationsanleitung

Handicare

Handicare SystemRoMedic Vega505EE Bedienungsanleitung

Handicare

Handicare EasyRoll2Way Bedienungsanleitung

Handicare

Handicare SystemRoMedic 8090 Bedienungsanleitung

Handicare

Handicare SystemRoMedic SoftLegSupport Bedienungsanleitung

Handicare

Handicare SitWalk Bedienungsanleitung

Handicare

Handicare SystemRoMedic ReTurn7500 Bedienungsanleitung

Handicare

Handicare LI2590.125 Series Bedienungsanleitung

Handicare

Handicare 960-117 Bedienungsanleitung

Handicare

Handicare SystemRoMedic StretcherSling Disposable Bedienungsanleitung

Handicare

Handicare SystemRoMedic Vega505EE Bedienungsanleitung

Handicare

Handicare SystemRoMedic EasyGlide Series Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung