Honeywell E3 Point E3SRMNO2 Bedienungsanleitung

Moniteur

de gaz à

distance

Remote Gas

Sensor

Manuel

d’utilisation

User

Manual

E³

oint

Gas

detectiond

vice

E³

Point Remote

Gas

Sensor

User

ual

Symbol Definitions

The following table lists the symbols used in this document to denote

certain conditions:

Symbol

Deﬁnition

ATTENTION: Identiﬁes information that

requires special consideration.

TIP: Identiﬁes advice or hints for the user,

often in terms of performing a task.

REFERENCE _ INTERNAL: Identiﬁes an

additional source of information within the

bookset.

CAUTION Indicates a situation which, if not avoided,

may result in equipment or work (data) on the

system being damaged or lost, or may result

in the inability to properly operate the process.

CAUTION: Indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injury. It may also be used

to alert against unsafe practices.

CAUTION: Symbol on the equipment refers

the user to the product manual for additional

information. The symbol appears next to

required information in the manual.

WARNING: Indicates a potentially hazardous

situation which, if not avoided, can result in

serious injury or death.

WARNING symbol on the equipment refers

the user to the product manual for additional

information. The symbol appears next to

required information in the manual.

E³Point Remote Gas Sensor User Manual i

ii E³Point Remote Gas Sensor User Manual

Point Remote Gas Sensor User Manual

iii

Table of Contents

Symbol Definitions .............................................................i

Introduction.........................................................................1

Description ....................................................................................1

Safety Information ...................................................................1

Installation............................................................................3

Sensor Locations ..........................................................................3

Installation Height .........................................................................4

Mounting .......................................................................................5

Wiring Diagram ....................................................................6

Connecting Main Sensor to Remote ............................................6

Specifications ......................................................................7

Detection Ranges and Alarm Levels.............................................7

Sensor Overrange When Interfacing wth the E³Point Main Unit.7

Standard Parts List .......................................................................9

Periodic Inspection and Maintenance .........................................10

Maintenance ..........................................................................10

Sensor Lifes Span...................................................................10

Point Remote Gas Sensor User Manual

Description

Introduction

The E³Point Remote Sensor is a toxic or combustible gas detection

sensor that is compatible with the E³Point Standalone sensor. The

sensor provides continuous monitoring for one of the following gases

in ambient air: CO, H2S, O2, NO2, and combustible hazards.

The E³Point is designed to be mounted on an extra wide (2 3/8”)

electrical box.

The E³Point Remote Sensor is intended for connection to E³Point,

Class 2, or limited power source (lps) only.

Safety Information

Users of the E³Point Remote Sensor require a full understanding of

the installation, operating, and maintenance instructions, otherwise

protection provided by the monitor may be impaired. Read the

following warnings before using the monitor.

Attention

This manual must be carefully followed by all individuals who

have the responsibility for using or servicing the sensor. Warranties

made by Honeywell Analytics with respect to this equipment will

be voided if the equipment is not used and serviced in accordance

with the instructions in this manual. Additionally, equipment

functionality and inherent protection may be compromised if this

manual is not carefully followed. If in doubt about a procedure,

contact Honeywell Analytics before proceeding.

Point Remote Gas Sensor User Manual

Introduction

Warnings

WARNING:

•

Install according to local electrical regulations and codes.

•

Installation should be performed by qualified personnel.

•

Do not paint over the sensor screen

•

Ensure that the sensor screen is free of dirt and debris.

•

Ensure that the sensor screen is not covered.

•

Do not expose the monitor to electrical shock and/or

continuous mechanical shock.

•

Do not expose the sensor to high-pressure water spray.

•

Do not use the monitor if it is damaged. Before use, inspect the

monitor. Look for cracks and missing metals or plastics. If the

monitor is damaged, contact HoneywellAnalytics immediately.

•

The warranty will be voided if the customer or any unauthorized

service personnel attempt to repair the unit.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Honeywell Sicherheitsausrüstung Handbücher

Honeywell

Honeywell Howard Leight VERISHIELD VS 321 Bedienungsanleitung

Honeywell

Honeywell MFL/6FT Bedienerhandbuch

Honeywell

Honeywell MILLER AIRCORE Bedienungsanleitung

Honeywell

Honeywell MUTEX 2 Bedienungsanleitung

Honeywell

Honeywell Miller H-Design DuraFlex Bedienungsanleitung

Honeywell

Honeywell Miller Turbolite Bedienerhandbuch

Honeywell

Honeywell Miller Soll VR500 Bedienungsanleitung

Honeywell

Honeywell BA300 Series Bedienungsanleitung

Honeywell

Honeywell Miller Soll Xenon Montageanleitung

Honeywell

Honeywell ExiLED Bedienungsanleitung

Honeywell

Honeywell Miller SafEscape ELITE SEHWLB FT Series Bedienungsanleitung

Honeywell

Honeywell FF-SYA234 Series Bedienungsanleitung

Honeywell

Honeywell VA201T Gebrauchs- und Pflegehandbuch

Honeywell

Honeywell NORTH OPENGO ABEKP15 Bedienungsanleitung

Honeywell

Honeywell FF-SB14 Series Handbuch

Honeywell

Honeywell COMBISAFE SkyReach 8100 Bedienungsanleitung

Honeywell

Honeywell Q-87586 Bedienerhandbuch

Honeywell

Honeywell A164221 Bedienungsanleitung

Honeywell

Honeywell MILLER Soll-MultiRail 17792 Technisches Datenblatt

Honeywell

Honeywell GENT S4-348 Series Gebrauchsanweisung

Honeywell

Honeywell Miller Falcon MP20G-LE Bedienerhandbuch

Honeywell

Honeywell Miller Soll GlideLoc Bedienungs- und Wartungshandbuch

Honeywell

Honeywell MaxLED 26m Bedienungsanleitung

Honeywell

Honeywell HS-600 Bedienungs- und Montageanleitung

Beliebte Sicherheitsausrüstung Handbücher anderer Marken

Innova

Innova Xtirpa Bedienungsanleitung

bolle SAFETY

bolle SAFETY B810 Bedienungsanleitung

SHENZHEN FANHAI SANJIANG ELECTRONICS

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T Bedienungsanleitung

Hiltron security

Hiltron security POWER8E Leitfaden

Hatco

Hatco B-950P Bedienungsanleitung

Sitec

Sitec TX MATIC Bedienungsanleitung

TEUFELBERGER

TEUFELBERGER GRIP 12 Bedienungsanleitung

MSA

MSA PremAire System Bedienungsanleitung

AMC

AMC 1022M Series Bedienungsanleitung

Trinity

Trinity CASS S3 Bedienungsanleitung

CMC

CMC Helitack HotSeat Bedienungsanleitung

Force

Force P-35 Bedienungsanleitung

ACM

ACM SAFETY D200 Produkthandbuch

ROCK

ROCK P-451 AS Bedienungsanleitung

Power first

Power first 2XYR7A Service-Handbuch

SCHUBERTH

SCHUBERTH SHP 28-C Bedienungsanleitung

Trango

Trango CINCH Bedienungsanleitung

GRIDMESH ANCHOR

GRIDMESH ANCHOR GA01 Bedienungsanleitung