Honeywell SimpleSaver Bedienungsanleitung

SCHED HOLD CLOCK SCREEN MORE

7 8 9

MON TUE WED THU FRI SAT

Following

Schedule

OK TO PICK MULTIPLE DAYS

SUN

FAN

AUTO

SYSTEM

HEAT

Inside Set To

Quick Reference for your

Honeywell touchscreen programmable thermostat

1Temperature warmer

2Temperature cooler

3Press day(s) to set program schedule

4Press to select fan operation

5Press to select system type

6Press to select program schedule

7Press to override program schedule

8Press to set clock

9Press to lock keypad for 30 secs to clean screen

10 Press for more options (select models only)

OVER

This thermostat is ready to go!

Your new thermostat is pre-programmed and ready to go.

Just set the time and day. Then check the settings below

and change if needed:

Clock setting

To set the current time display, press CLOCK,

then press or to adjust the time. Press and hold

or to advance the time more quickly.

Press DONE to save & exit (or press CANCEL

to exit without changing the time).

Note: The real-time clock should never require

adjustment since it automatically updates for

daylight savings time, and stores all date/time

information.

System setting

Press the SYSTEM button to select, then press DONE.

• Heat: Thermostat controls only the heating system.

• Cool: Thermostat controls only the cooling system.

• Off: Heating and cooling systems are off.

• Auto: Thermostat automatically selects heating or

cooling depending on the indoor temperature.**

• Em Heat (only for heat pumps with auxiliary heat):

Thermostat controls Emergency and Auxiliary Heat.

Compressor is locked out.**

** Select models only

Fan setting

Press FAN to select fan operation, then press DONE.

• On: Fan is always on.

• Auto: Fan runs only when the heating or cooling

system is on.

• Circ: Fan runs randomly, about 35% of the time, not

counting any run time with the heating or cooling

system.

You can press FAN to override the fan settings you’ve

programmed for different time periods. If you select On

or Circ, the setting you select will remain active until

you press FAN again to select Auto.

Battery replacement

Batteries are optional (to provide backup power)

if your thermostat was wired to run on AC power

when installed.

Install fresh batteries immediately when the LO

BATT warning begins ﬂashing. The warning

ﬂashes about 30 days before batteries are depleted.

Even if the warning does not appear, you should

replace batteries once a year, or before leaving

home for more than a month.

To adjust program schedules

1. Press SCHED, then EDIT.

2. Press day buttons (MON-SUN) to select day(s).

3. Press or to set Wake time for selected day(s).

4. Press or to set Heat and Cool temperature for

this time period.

5. Press other time periods (LEAVE, RETURN, SLEEP)

to set time and temperatures for each.

6. Press DONE to save & exit (or press CANCEL to exit

without saving changes).

Program schedule override (temporary)

Press or to immediately adjust the temperature.

This will temporarily override the temperature setting for

the current time period.

The new temperature will be maintained only until the

time you set. When the timer expires, the program schedule

will resume and set the temperature to the level you’ve

programmed for the current time period.

To cancel the temporary setting at any time, press CANCEL

(or SCHED). The program schedule will resume.

Program schedule override (permanent)

Press HOLD to permanently adjust the temperature.

This will turn off the program schedule. Whatever

temperature you set will be maintained 24 hours a day

until you manually change it or press CANCEL (or

SCHED) to cancel “Hold” and

resume the program schedule.

Who Do I Call For Help?

You can call toll free at 1-800-468-1502.

Quick Reference for your Honeywell touchscreen programmable thermostat

Heat

(Mon-Fri)

Heat

(Sat-Sun)

Cool

(Mon-Fri)

Cool

(Sat-Sun)

700

620

700

620

780

850

780

820

700

620

700

620

780

850

780

820

Wake

(6:00 a.m.)

LEAVE

(8:00 a.m.)

RETURN

(6:00 p.m.)

SLEEP

(10:00 p.m.)

or cancel period or cancel period

This thermostat is pre-set to use EnergyStar®

program settings.We recommend these

settings, since they can reduce your heating/

cooling expenses by as much as 33%.

EnergyStar® settings for

maximum cost savings

Heat

(Mon-Fri)

Heat

(Sat-Sun)

Cool

(Mon-Fri)

Cool

(Sat-Sun)

Wake

(6:00 a.m.)

LEAVE

(8:00 a.m.)

RETURN

(6:00 p.m.)

SLEEP

(10:00 p.m.)

Customer requested settings

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell RTH7400D Bedienungsanleitung

Honeywell

Honeywell T810D Bedienungsanleitung

Honeywell

Honeywell T8401C1031 Bedienungsanleitung

Honeywell

Honeywell T822 Bedienungsanleitung

Honeywell

Honeywell Lyric T6 Pro Wi-Fi Bedienungsanleitung

Honeywell

Honeywell T7200 Bedienungsanleitung

Honeywell

Honeywell Tradeline T8024D Bedienungsanleitung

Honeywell

Honeywell T8621 Bedienungsanleitung

Honeywell

Honeywell RTH2510B1000/U Bedienungsanleitung

Honeywell

Honeywell TH2110DV1008/U Bedienungsanleitung

Honeywell

Honeywell DT90E Betriebsanleitung

Honeywell

Honeywell Y87RFC Bedienungsanleitung

Honeywell

Honeywell FocusPRO 5000 Bedienungsanleitung

Honeywell

Honeywell RTH2510 Series Bedienungsanleitung

Honeywell

Honeywell 8162 Bedienungsanleitung

Honeywell

Honeywell EVOTOUCH CONTROLLER Bedienungsanleitung

Honeywell

Honeywell ADEMCO 4500 Bedienungsanleitung

Honeywell

Honeywell Evohome Bedienungsanleitung

Honeywell

Honeywell T1 Pro Bedienungsanleitung

Honeywell

Honeywell T5+ Bedienungsanleitung

Honeywell

Honeywell VisionPRO TH8000 Series Bedienungsanleitung

Honeywell

Honeywell DT90E Bedienungsanleitung

Honeywell

Honeywell SUITEPRO TB6575 Bedienungsanleitung

Honeywell

Honeywell TP9600 Series Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung