Hoover 38766019 Bedienungsanleitung

HOOVER,Upright

with Removable Tool Rack

IIIIII IIIIII IIIIIII

Owner's Manual

ENGLISH 4pp.1-13

ESPANOL '-,),pag. 14_20

[::RAN(_AIS _ p. 21-27

www.hoover.com

Read this manual before

operating the cleaner

Fill in and retain

The model and serial number are located on the bottom of the cleaner.

For your personal records, please enter the COMPLETE model and serial number

in the spaces provided and retain this information.

Your cleaner is model

and has serial number_

It is suggested that you attach your sales receipt to this owner's manual.

Verification of date of purchase may be required for warranty service of your

HOOVER product.

Save!

Index

Assembling Cleaner .......................... 3-6

Cleaning Effectiveness

Per Amp Rating .................................. 12

How To Use

Cleaner Description .......................... 6

Cleaning Tools .................................. 8

Upright Cleaner .............................. 7-8

If You Have a Problem ........................ 12

Clearing Blockages ........................ 13

Important Safeguards .......................... 2

Maintenance

Authorized Service .......................... 12

Lubrication ...................................... 12

Replacing Belt ............................ 10-11

Replacing Brush Roll ...................... II

Replacing Headlight ........................ 10

Replacing Filter Bag ........................ 9

Replacing Final Filter .................. 9-10

Warranty .............................................. 13

www.hoover.com

Important Safeguards

When using an electrical appliance, always follow

basic precautions, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

Warning: To reduce the risk of fire, electric shock, or injury:

• Do not use outdoors or on wet surfaces.

•Close supervision is necessary when any appliance is used by or near children.

Do not allow vacuum cleaner to be used as a toy or to run unattended at any time.

• Keep hair, loose clothing, fingers, feet and all parts of body away from openings,

rotating agitator and other moving parts. Do not operate cleaner in bare feet or

when wearing open toe shoes or sandals.

•Do not pick up anything that is burning or smoking, such as cigarettes, matches, or

hot ashes.

•Do not use to pick up flammable or combustible materials such as gasoline or fine

wood sandings or use in areas where they may be present.

•Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner

and the bag.

•Always turn off this appliance before connecting or disconnecting hose.

•Do not use without dust bag or filters in place. Change bag frequently when picking

up very fine materials such as powder.

•Use extra care when cleaning on stairs.

•Do not put any object into openings. Do not use with any opening blocked; keep

free of dust, lint, hair, or anything that may reduce air flow.

•Do not pull or carry by cord, use cord as a handle, close door on cord or pull cord

around sharp edges or comers. Do not run appliance over cord. Keep cord away

from heated surfaces.

•Always disconnect cord from electrical outlet before servicing the cleaner.

•Unplug cleaner when not in use. Turn off all controls before unplugging.

•Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Never

handle plug or appliance with wet hands.

•The use of an extension cord is not recommended.

•Do not use with damaged cord or plug. If appliance is not working as it should, has

been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover

Factory Service Center or Authorized Hoover Warranty Service Dealer (Depot).

•Use vacuum cleaner only for its intended use as described in the instructions.

Use only attachments recommended by The Hoover Company; others may cause

hazards.

Save these instructions!

it is extremely important to

read and follow all the

instruction steps in order.

The assembled cleaner will look like this drawing.

If you need assistance with any step of the assembly or operation,

call:

1-800-944-9200 for an automated referral of authorized

service outlet locations (U.S. only) OR

1-330-499-9499 to speak with a representative in our

Consumer Response Center OR

Visit us on-line at www.hoover.com to find the

service outlet nearest you (click on the 'Service" button).

Carton contents

Remove all parts from carton and

identify each item shown.

Note that some of the items are

shipped together in the sealed

bag with the owner's manual.

A. Upper handle

B. Bag compartment assembly

C.Cord

D. Tool caddy

E. Cleaner base

F. Handle bolt and nut packet

(One extra nut included)

G. Upper handle screws (2)

H. Paper filter bag

LHose, cleaning tools, crevice

wand and extension wand

Note:The green or white switch

lock (A) near the ON/OFF switch on

the back of the bag compartment

assembly, helps in assembling

your cleaner.

Assembly can be continued if the

switch lock is missing. However,

do not remove the switch lock

until assembly is completed.

With side marked "UP" visible, insert

end into pocket in the bottom of the

bag compartment assembly.

81ide cord protector toward top of

bag assembly and slide through

opening.

Step 1Assemble handle

Removing bag door

Pull bag door latch forward and

remove bag door.

Set bag door aside.

Attaching cord

Slide cord protector (AA) away

from rectangular end of cord.

Insert large rectangular end of cord

through opening in back of bag

compartment.

With bag compartment in the verti-

cal position, rotate cord protector

(B) on cord so that the arrow is on

the side.

Press protector into the slot (C).

Protector should be pointing down-

ward when assembly is in the verti-

cle position.

Pull cord tight.

Press cord into place at each of the

three slots indicated.

Do not plug cleaner in until

assembly is totally complete.

Attaching bag compart.

ment assembly

Remove cardboard protector from

bottom of bag compartment assem-

b I y

With opening of bag assembly

toward the front, place it down onto

the extension on cleaner base.

Rock handle side to side while

pushing down firmly. Extra push-

ing effort may be required. Make

sure handle is pushed down com-

pletely.

Push bolt into hole (D) on lower front

of assembly.

Place nut in recessed area at back

of assembly. Hold nut in place

while tightening bolt securely with a

screwdriver.

Only one nut is needed on this

model. The extra nut is not required

but has been provided for your con-

venience.

Attaching upper handle

Slide upper handle onto assembly,

as shown, until the handle snaps

into position•

Insert the two s_ews at_the front of

the handle to secure it-Onto the

assembly. ,;. :

Tighten the screws.

IF'f•

"*"%1 E

Attaching filter bag

Align opening in bag with dirt tube

(E) inside bag compartment.

Push bag firmly onto tube•

Tuck top and bottom of bag into bag

compartment.

=l:i

To replace bag door, insert the 2

tabs (F) on bottom of door into the 2

slots on bag compartment.

Make sure all edges of bag are

completely inside the bag com-

partment.

Close door.

Remove green or white switch lock

(A) in back of the cleaner.

Step 2 Attach tool

caddy

The tool caddy is designed to be

used either on the cleaner for easy

access to the tools or if the tools are

not going to be used, it can be

removed and hung for storage.

If you do not want to attach the

caddy to the cleaner at this time,

proceed to Step 3 for proper tool

placement on the. caddy.

|JlrA

Slide edge of tool caddy down into

the channel on the back of the

cleaner.

Lift caddy off the cleaner to remove

it for storage.

Step 3 Position tools

on caddy

Insert hose connector into bottom of

caddy.

Drape the hose over top and plug it

into the opposite end until it snaps

into place

Continued -# 5

Position extension wand (G) and

place crevice wand (H) inside

extension wand.

Position dusting brush (I) and furni-

ture nozzle (J) as shown.

CAUTION: When cleaner is turned

on, the agitator will continue to

rotate when cleaner handle is in

upright position. Avoid tipping

cleaner or setting it on furniture,

fringed area rugs, or carpeted

stairs during tool use.

Your HOOVER cleaner is

now assembled and

ready to use!

Please fill out and return the prod-

uct registration card included with

your cleaner.

Cleaner description

P_I

10 9

The assembledcleaner will look like the

drawing.

1. Handle

2.ON/OFF switch

3.Cord hooks: starting at the bottom

hook,wrap cord around hooks for

storage. The top hook can be rotated

right or left for easy cord

release.

4. Bag door latch

5. Bag door

6. Final filter

7.Stair cleaning handle

8. Hood

9. Carpetheight.control

10. Furnitureguard: helps prevent

cleaner from marking furniture.

11. Headlight

12. Hose door

13. Removable tool caddy

14. Hose

15. Extensionwand

16. Crevice wand: stores insideexten-

sion wand.

17. Dustingbrush

18. Furniturenozzle

19. Handle release pedal

Operate cleaner only at voltage spec-

fled on data plate on bottom of

cleaner.

This cleaner is intended for household use.

ON-OFF switch

To turn cleaner ON, depress switch (A)

toward front. To turn cleaner OFF, depress

switch toward back.

Note: To reduce the risk of electric shock,

this appliance has a polarized plug (one

blade is wider than the other). This plug

will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install the

proper outlet. Do not change the plug in

any way.

To insure that the filter bag is inflated, plug

cord into electrical outlet and turn cleaner

ON. With handle in upright position, pull

back on handle until front of cleaner (B) is

lifted off the carpet.

Handle positions

The handle of your cleaner has three

positions; upright for storage and when

using cleaning tools; operating for

general operation on carpet and floors;

low for reaching under low furniture. Step

on handle release pedal to lower handle.

Transporting cleaner

To move your cleaner from room to

room, put handle in updght position, tilt

cleaner back on rear wheels, and push

forward (A).

The cleaner can also be moved by

lifting it as shown in (B)

Carpet height adjust-

ment

When it is necessary to raise and lower the

front of the cleaner (A) for various carpet

pile heights, slide the carpet height control

(B) to the correct setting.

On some models, carpet pile height set-

tings are indicated as shown (C).

For ease in sliding the control, the han-

dle should be in the upright position.

The front of the cleaner will not move

into the adjusted position until the

handle is lowered to the operating

position.

For maximum cleaning performance,

the following carpet height settings are

recommended.

• Low Setting 1: for bare floors

• Setting 2*: for low pile, level loop, kitchen

type, and other similar types

of carpet

• Setting 3*: for very deep pile carpet

*Note: if the cleaner is difficult to push,

slide the control to the next higher setting.

Edge cleaning

Edge cleaning is provided on both sides

of the front of the cleaner to help,

remove dirt in carpet near baseboards

and furniture.

Guide either side of the cleaner parallel

to edge of carpet or furniture.

Cleaning lightweight

flexible rugs

Stand on one end of rug and move

cleaner toward other end or edge.

Before reaching edge, push down on

handle. This will lift up the nozzle (front

of cleaner) and will prevent rug from

clinging to cleaner.

Continue to lift front of cleaner so that

when you have reached the edge, it is

completely off the rug. Move cleaner

back to start again, lower front of

cleaner, and use only forward strokes.

Stair cleaning

A stair cleaning handle has been

designed for ease in using your cleaner

on stairs.

With handle in operating position, place

fingers under edge of stair cleaning

handle and guide cleaner with other

hand on upper handle.

As an alternative, you may use the hose

and furniture nozzle for stair cleaning.

When using cleaning tools, the

agitator will continue to rotate.

CAUTION: To avoid personal injury or

unnecessary wear to carpet, and to

prevent the cleaner from falling, use

extra care if cleaner is placed on

stairs.

Cleaning tools

Tools allow you to clean surfaces above

the floor and reach hard to clean areas.

if the tool caddy has been removed,

reposition it on the cleaner.

Use tools with the cleaner handle in

upright position.

CAUTION: Agitator continues to rotate

while cleaner handle is in upright

position. Avoid tipping cleaner or

setting it on furniture? fringed area

rugs, or carpeted stairs during tool use.

A. Plug-in hose

Turn cleaner OFF before plugging-in

or removing hose.

With cleaner handle in upright position,

open hose door and insert hose connec-

tor until it is locked in position. Suction

will automatically be diverted to the hose

when cleaner is turned ON.

To remove hose, press latch on hose

connector and pull up.

Note: Hose must be removed from

hose door when cleaning carpet and

rugs to insure proper cleaning perfor-

mance.

B. Select proper cleaning

tool

A. Dusting brush can be used for

carved furniture, table tops, books,

lamps, lighting fixtures, Venetian blinds,

baseboards, shutters, and registers.

B. Furniture nozzle can be used

for upholstered furniture, draperies,

tapestries, mattresses, clothing,

automobile interiors, and carpeted stairs.

C. Crevice wand can be used in tight

spaces, corners and along edges in such

places as dresser drawers, upholstered

furniture, stairs, and baseboards. It can

also be used for extra reach with the

dusting brush and/or extension wand.

D. Extension wand is used to give extra

length to your hose. Attach it to any of

the above tools.

C. Attach wand and

tools

The tools are attached to the hose or the

wand in the same manner.

Push tool firmly onto hose; twist tool

slightly to tighten or loosen connection.

The dusting brush (A) also can be

attached to the crevice wand.

D. After using tools

The tool caddy can be removed and

hung for storage.

Make sure hose is unplugged from hose

door. Lift caddy straight up to remove it

from the cleaner.

How to clean tools

To clean the hose, wipe off dirt with a

cloth dampened in a liquid detergent.

Rinse with a damp cloth.

Cleaning tools may be washed in warm

water with a detergent. Rinse and air

dry before using.

Familiarizeyourselfwiththesehome

maintenancetasksasproperuseand

careofyourcleanerwillensurecontin-

uedcleaningeffectiveness.

Filter bag

When to replace

Check filter bag from time to time. It is

recommended that you change the filter

bag when dirt reaches the dotted !ine.

If more dirt than this accumulates, your

cleaner may not operate effectively.

NOTE: Check and change the filter bag

frequently when using cleaner on new

carpet due to rapid accumulation of

carpet fluff.

CAUTION: Very fine materials, such

as face powder, cornstarch, fireplace

ashes or fireplace soot, may seal the

paper bag and may cause it to burst

even though it is only partially full of

dirt. When cleaner is used to remove

material of this nature, change the

filter bag often.

Where to buy

Filter bags may be purchased from your

local Authorized Hoover Dealer (Depot),

Leading Retailers, from Hoover Factory

Service Centers, using the order form

'packed with your cleaner, or through

The Hoover Company online at

W_V. hoovercom

When ordering bags, be sure to give

the model number of your cleaner.

What to buy ::,:

If your cleaner was originally equipped -

with a micro filtration bag, it is important

to use only Genuine HOOVER" Aller-

gen Filtration "rvDe Z disposable bags

in order to maintain the original clean-

ing effectiveness of your cleaner.

Regular HOOVER" Type Z disposable

filter bags also fit your cleaner.

To assure that your cleaner operates at

peak performance, it is imperative that

you use only genuine HOOVER filter

bags distributed by The Hoover

Company. HOOVER bags can be

identified by these trademarks -

Changing filter bag

Disconnect cleaner from electrical outlet.

Removing bag door

Pull bag door latch forward and remove

door from cleaner.

Grasp bag collar and pull collar from tube.

Note: Do not clean out old bag and

reuse. Discard used bag.

,= %)

Removing and installing filter

bag

Align opening in new filter bag with dirt

tube (B) inside bag compartment. Push

bag collar (A) firmly onto tube.

Tuck top and bottom of bag into bag oom-

partment.

C""

Replacing bag door

To replace bag door, lift up lower edge of

filter bag. Insert the 2 tabs (C) on bottom

of bag door into the 2 slots on bag

compartment.

Make sure all edges of filter bag are

completely inside the bag compart-

ment.

Close door.

Final filter (somemodels)

The final filter, located inside the bag

door, assists in the filtration process to

return clean air to the room. The filter

can be cleaned when it becomes dirty.

How to clean

Disconnect cleaner from electrical

outlet.

Removing filter retainer

Remove filter bag door (Fig. 3-1).

Open filter retainer at (D) and remove

retainer.

Continued -_

Removing filter

Lift out filter (E) and hand wash it in cold

water with mild detergent.

Let filter air dry and reposition it on

the front of the cleaner. Make sure

the white colored side of filter faces

outward.

Reposition retainer and filter bag door.

Should you want to replace this filter, ask

for HOOVER part No, 38766019.

Headlight

What to buy

This cleaner uses a 12 volt, wedge base

type 912 bulb, Hoover part No. 27313-

101.

How to replace

Disconnect cleaner from electrical

outlet.

Removing hood

Place handle in low position and turn

cleaner over.

Hood snaps off by inserting the end of

aflat screwdriver into one of the areas

(labeled with an arrow) on either side of

the cleaner as shown. Push screwdriver

outward to release hood. Repeat on the

other side and remove hood.

////__jZ/_/_

Installing bulb and reposition.

ing hood

Pull old bulb straight out of socket.

Push new bulb straight into socket until

locked in place.

Excessive force is not required.

Reposition hood and push firmly to snap

it into place on the sides and at the

front.

Note: It is not necessary to turn the

cleaner over and use a screwdriver to

remove the hood once you are familiar

with the 2 places on the hood (indicated

by arrows in Fig. 3-6) that unlatch it.

Simply pull the sides of the hood out-

ward at those areas and lift off the hood.

Belt replacement

The belt on your HOOVER cleaner

causes the agitator to rotate and is

important for the effective operation of

the cleaner. The belt is located under

the bottom plate of the cleaner and

should be checked from time to time

to be sure it is in good condition.

When to replace

To check belt, remove bottom plate as

shown in "How to replace." Replace

belt if it is stretched, cut or broken.

What to buy

To assure effective operation, use only

genuine HOOVER .belts with your

cleaner. When purchasing a new belt,

ask for Hoover pa_ No. 38528-027.

How to rep,ace--"_

Removing bottom plate

Disconnect cleaner from electrical

outlet.

Place handle in low position and turn

cleaner over.

Remove the 2 screws as shown with a

Phillips screw driver.

Lift bottom plate at (F) and rotate it off

the cleaner.

Removing used belt

Remove agitator brush roll and

used belt.

Discard used belt.

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover SteamVac F5835-900 Betriebsanleitung

Hoover

Hoover SteamVac SpinScrub Bedienungsanleitung

Hoover

Hoover PowerMAX Betriebsanleitung

Hoover

Hoover UH70400 Bedienungsanleitung

Hoover

Hoover VAPORLITE PRO Bedienungsanleitung

Hoover

Hoover UH70140 Bedienungsanleitung

Hoover

Hoover Athen Evo Bedienungsanleitung

Hoover

Hoover S3670 - WindTunnel Bagged Canister Vacuum... Bedienungsanleitung

Hoover

Hoover SteamVac Aqility Bedienungsanleitung

Hoover

Hoover Platinum Collection Bedienungsanleitung

Hoover

Hoover U5162 Bedienungsanleitung

Hoover

Hoover F7210 Bedienungsanleitung

Hoover

Hoover U5361950 Bedienungsanleitung

Hoover

Hoover Steam cleaner Bedienungsanleitung

Hoover

Hoover HF110P 011 Bedienungsanleitung

Hoover

Hoover EmPower C1660900 Bedienungsanleitung

Hoover

Hoover CLEANSLATE Plus Bedienungsanleitung

Hoover

Hoover Convertible U4123001 Bedienungsanleitung

Hoover

Hoover SprintEVO SE40 Bedienungsanleitung

Hoover

Hoover REACT UH73300 Bedienungsanleitung

Hoover

Hoover POWER SCRUB XL Bedienungsanleitung

Hoover

Hoover CYCLONIC BAGLESS UPRIGHT Bedienungsanleitung

Hoover

Hoover Xarion Pro Bedienungsanleitung

Hoover

Hoover Curve Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch