Hoover Convertible U4113001 Bedienungsanleitung

_#/53...

Fill in and retain!

The HOOVER vacuum cleaner you have just purchased is a combina-

tion cleaner. It is used for carpet and rug cleaning and may be u,_

with attachments for above the floor cleaning.

Your cleaner is a model

and has a serial number.

For your personal records, please enter the model number and serial

number in the spaces provided above and retain in a safe place.

The model number and serial

number appear on the bottom

of the cleaner base.

Save! CLEANER

BASE

Index

Cleaner Description and Unpacking ............. 3,4

Energy Saving Tips ........................... ,22

How to Assemble Cleaner. • .................... 5-8

How to Use on Carpet and Floors .............. 9-11

How to Use Cleaning Tools. • ................. 12-16

If You Have a Problem... ...................... .21

Important Safeguards ........................... 2

Lubrication ................................... 22

Maintenance

Authorized Service .......................... 21

How to Replace Belt ...................... 17-18

How to Replace Brushes.. ................. 19,20

How to Replace Headlight .................... 17

How to Replace Throw Away Bag ......... 8,16,17

Second Speed. • ............................... 15

Special Features ............................... 11

Important Safeguards!

•Read all instructions.

)trning: Electric shock could occur if used outdoors or on wet

'.Jrfaces.

• Close supervision is necessary when any appliance is used by or near

children. Do not allow vacuum cleaner to be used as a toy or to run

unattended at any time.

•Keep hands, feet, loose clothing, and hair away from rotating

agitator. Do not operate cleaner in bare feet or when wearing open

toe shoes or sandals.

• Don't run cleaner over cord. It may damage insulation.

•Do not use cleaner to pick up matches, or live ashes and cigarette

butts.

• Avoid picking up hard, sharp objects with the cleaner. They may

damage the cleaner and the bag.

•Unplug cleaner when not in use. Turn machine off at switch before

unplugging.

•Always disconnect cord from electrical outlet before servicing the

cleaner.

•Change bag frequently when picking up very fine materials such as

powder,

•Grasp the plug to disconnect from wall outlet to avoid damage to

cord, plug, prongs, or receptacle,

•The use of an extension cord is not recommended,

•If cleaner is in disrepair, do not attempt to operate.

•Have repairs made by the qualified personnel at Hoover Factory

Service Centers or Authorized Hoover Warranty Service Dealers.

_' _e vacuum cleaner only for its intended use as described in the

_ _tructions. The use of attachments not recommended by the

appliance manufacturer may cause hazards.

Save these instructions!

Unpacking

Unpack the cleaner from the

carton and identify the parts

shown. Remove and dispose o_

the cardboard packing.

A. Upper handle section

B. Lower handle section

C. Cleaner main body and hood

assembly

D. Outer bag assembly

E. Throw away bag

The cleaner assembled will

look like the drawing below.

(]

B C

After identifying each part, begin assembling.

1. Headlight (available with some models).

2. Hood

_-_ile Height Adjustment Display (some models only): indicates the

, _ur positions set.. by the Adjustment Lever for cleaning various carpet

• piles. Four positions are: LOW, NORMAL, HIGH and SHAG.

4. Adjustment Lever for Carpet Pile Height: to adjust the underside of

the cleaner (nozzle location) to the carpet pile height.

5. Cord Storage Hooks: wrap cord around hooks for storage. On some

models, the top cord storage hook can be rotated forward or backward

for easy cord release.

6. Handle: square design shown in sketch; some models have round han-

dle.

7. ON-OFF Switch: to turn on, push switch downward; to turn cleaner

off, push switch upward.

8. Spring Hook: place spring ring over hook to support the bag.

9. Outer Bag: covering for throw away bag.

10. Handle Bail: support for handle.

11. Carrying Handle: located on the underside of the handle bail.

12. Handle Release Lever: step on lever to lower handle to Operating and

Low position.

13. Furniture Guard: prevents cleaner from marking furniture.

r" _rate cleaner only at voltage specified on data plate on bottom of

__>her base,

How to assemble

Before assembly, identify the

type of handle on your cleaner:

1) Square handle with molded

grip or 2) Round handle. Then as-

semble the cleaner according to

the type of handle.

1) Square handle with

molded grip

A. Put handle together

Remove cardboard from end of

handle sections.

Slide the two handle sections to-

gether. Check to see that cord

storage hooks are on the same

side of handle. Insert bolt

through small holes and secure

with nut. Tighten nut with screw-

driver.

If the nut and bolt will not assem-

ble as shown in the illustration,

the holes in the handle are not

lined up correctly.

B. Attach handle to

the cleaner

Unscrew nut and remove bolt

from handle bail.

Connect electric plug from the

handle bail with the socket in the

handle. Make sure plug assembly

is positioned as shown.

Push handle down into place in

bail. The excess wire and electric

connection guide themselves into

the handle, Push down until han-

dle is securely in place.

€

Reinsert bolt through small holes

of handle and secure with nut.

Tighten nut with screwdriver.

Proceed to Section C.

2) Round handle

A. Put handle together

Remove cardboard from the end

of handle sections.

Slide the two handle sections to-

gether. Check to see that cord

storage hooks are on the same

side of handle. Insert bolt through

small holes and secure with nut.

Tighten nut with screwdriver.

If the nut and bolt will not assem-

ble as shown in the illustration,

the holes in the handle are not

lined up correctly.

B. Attach handle to

the cleaner

Unscrew nut and remove bolt

and plate from handle bail.

Take assembled handle and place

so that the socket holes in the

bottom of the handle are directly

in line with the electrical prongs.

Position the handle so that the

ON-OFF switch is to the rear of

the cleaner.

Push down until handle is secure-

ly in place, Insert bolt into small

hole in front of handle.

Replace plate on back of handle,

by inserting projection on plate

into lower hole on handle. Tabs

on handle bail will fit into notches

on plate. Position nut on bolt and

tighten with screwdriver.

C. Attaching outer bag

to cleaner

The outer bag is connected at the

rear of the cleaner by hooking the

two projections at the bottom of

the outer bag assembly into the

grooved plate extending from

back of cleaner base.

Then pull the bag clip (located

just above the cleaner opening)

to the left and fit bag against

opening. Slide the bag clip to the

right to fit completely over the

bag lock.

Attach the bag to the spring

hook, located on the top section

of the handle.

D. Attach throw away

bag to cleaner

To attach throw away bag to

cleaner, unzip outer bag. Pull out

tube.

Push bag collar firmly onto tube by

first positioning bottom of collar,

and then top, onto tube. Make

sure the collar is pushed past the

raised portion at the top and bot-

tom of the tube.

Pull out pleats of bag. Tuck top, then bottom of bag into

outer bag. Zip outer bag.

How to use

How to operate

To turn cleaner ON, push switch

down. To turn cleaner OFF, push

the switch up.

Plug into electric outlet. Your

cleaner is now ready to operate.

Turn the cleaner "ON" and, with

handle in upright position, pull

back on handle until the front of

the cleaner is free from the car-

pet. This insures that the throw

away bag is inflated.

Handle adjustment

The handle of your cleaner has

three positions: Upright for

storage and when using attach-

ments; Operating for general

operation on carpet and floors;

Low for reaching under low fur-

niture.

lpright ting

Adjustment for carpet

pile height

The cleaning of carpet and rugs

takes place at the nozzle. This is

the opening at the bottom of the

cleaner where the agitator is lo-

cated.

It is necessary to raise and lower

the nozzle for various carpet pile

heights. The adjustment lever

raises and lowers the nozzle for

various carpet pile and is located

to the right of the bag near the

bottom of the cleaner.

ADJUSTMENT N O ZZ L E

LEVER

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hoover Staubsauger Handbücher

Hoover

Hoover Vacuum cleaner Bedienungsanleitung

Hoover

Hoover HSV 40 Installationsanleitung

Hoover

Hoover FloorMate SpinScrub 800 Bedienungsanleitung

Hoover

Hoover WindTunnel Wind Tunnel Caniste Bedienungsanleitung

Hoover

Hoover FloorMATE H3000 Bedienungsanleitung

Hoover

Hoover Sensory_ML Bedienungsanleitung

Hoover

Hoover FREESPACE EVO Bedienungsanleitung

Hoover

Hoover Freedom Pets FD22RP Bedienungsanleitung

Hoover

Hoover UH71230RM Bedienungsanleitung

Hoover

Hoover Conquest 14 Bedienungsanleitung

Hoover

Hoover TFS7187 011 Bedienungsanleitung

Hoover

Hoover S3670 - WindTunnel Bagged Canister Vacuum... Kurzanleitung zur Einrichtung

Hoover

Hoover Freejet 3 in 1 Bedienungsanleitung

Hoover

Hoover Vacuum Cleaners Bedienungsanleitung

Hoover

Hoover JOVIS SJ144WSR4 Bedienungsanleitung

Hoover

Hoover SteamVac F7210-900 Bedienungsanleitung

Hoover

Hoover HURRICANE HU71HU02 Bedienungsanleitung

Hoover

Hoover C1412 Bedienungsanleitung

Hoover

Hoover SPRINT EVO Bedienungsanleitung

Hoover

Hoover FH50210 Bedienungsanleitung

Hoover

Hoover ONE PWR BLADE Bedienungsanleitung

Hoover

Hoover U5175900 - Fold Away Widepath Upright Vacuum... Bedienungsanleitung

Hoover

Hoover KS51PET 011 Bedienungsanleitung

Hoover

Hoover UH70600 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch