HP Vectra VE6 8 Bedienungsanleitung

PCI Wake on LAN Token Ring Adapter

86H1880

Installation Guide

Notice

The information contained in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this material,

including, but not limited to, the implied warranties of merchantability and

fitness for a particular purpose.

Hewlett-Packard shall not be liable for errors contained herein or for incidental

or consequential damages in connection with the furnishing, performance, or use

of this material.

Hewlett-Packard assumes no responsibility for the use or reliability of its

software on equipment that is not furnished by Hewlett-Packard.

This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this document may be photocopied,

reproduced, or translated to another language without the prior written consent

of Hewlett-Packard Company.

Microsoft®, Windows® and MS-DOS® are registered trademarks of Microsoft

Corporation.

MMXTM is a trademark of Intel Corporation.

Pentium® is a registered trademark of Intel Corporation.

Hewlett-Packard France

Commercial Desktop Computing Division

38053 Grenoble Cedex 9

France

1 Connecting to a Netware 3.12 Server

Windows for Workgroups

1 Connecting to a Netware 3.12 Server

Windows for

Workgroups

Requirements

• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.

• IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.

• Driver Name: IBMTRPO.LAN Size: 65KB Date: 7/26/96

• Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and

NWLink NetBIOS transfer protocols.

Device Configuration

Procedure

1Boot the Vectra to a DOS prompt, and insert the IBM Token-Ring 16/4 PCI

adapter and drivers CD ver 1.

2VE7/VE8: From the "IBMTRPCI\LANAID\" directory on your CD-ROM

type "LANAIDC/VIEW" to verify the deice configuration settings. VL8 and

VE7/VE8: From the “IBMWOL\IBMTRPCI\LANAID\” directory on your

CD-ROM run “LANAID.EXE.”

3Hit enter for “Software Installation” and verify the following options:

4DOS with Windows v3.1x

5Express Install LAN Client’s NetWare Client & 802.2

6Hit enter to continue, and at the “Express Install of IBM LAN Client”

window, hit enter to install.

7After file copy is complete, remove any diskettes, hit enter four times to

exit, then reboot the computer.

8After Windows loads, open the “Netware User Applications” window, and

Vectra VL8 Vectra VE7/VE8

Interrupt 11 10(11)

I/O Address C800-h DC00h

Card State - Enabled

1 Connecting to a Netware 3.12 Server

Windows for Workgroups

double-click the “NetWare User Login” icon.

9Login into the current server to verify connection.

(If you do not have the required information to Login, contact your system

administrator)

1 Connecting to a Netware 3.12 Server

Windows 95 SR2

Windows 95 SR2 Requirements

• HP Vectra with Windows 95SR2 installed.

• IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.2

• Driver Name for Vectra VL8: W95SETUP.INF Size: 8K Date: 10/18/96

• Driver Name for Vectra VE7/VE8: OEMSETUP.INF Size: 65K Date: 08/05/

97.

• Novell Netware server that supports Net BEUI, NWLink IPX/SPX, and

NWLink NetBIOS transfer protocols.

Device Configuration

Procedure

1With the HP Vectra turned off, install the IBM 16/4 PCI TR adapter card

into a PCI slot.

2Boot the machine to Windows 95, and the Token-Ring card will

automatically be recognized. Click on “Next.”

3When prompted, click on “Other Locations.”

4Insert drivers CD, set the path to “D:\WIN95\” (Where “D” is the drive

letter assigned to your CD-ROM) and click “OK.”

(If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN

\TRPCI.WOL\WIN95\”)

5Click on “OK” to continue the installation.

6Verify that “IBM PCI Token-Ring Adapter, NDIS2/3” is listed and click on

“Finish.”

7Click “OK” to provide your Computer and Workgroup names.

8Enter your Computer Name, Workgroup Name, Computer Description,

and click on “Close.”

Vectra VL8 Vectra VE7/VE8

Card State - Enabled

Interrupt 11 10(5)

I/O Address C800-h DC00-h

1 Connecting to a Netware 3.12 Server

Windows 95 SR2

9When prompted for the “IBM PCI Token-Ring Option Diskette” click on

“OK.”

10 In the “Copying Files…” dialogue box, set the path to “D:\DOS\” (Where

“D” is the drive letter assigned to your CD-ROM) and click “OK.”

(If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN

\TRPCI.WOL\DOS\”)

11 When prompted for the file “IBMTRP.VXD”, set the path to “D:\WIN95\”

(Where “D” is the drive letter assigned to your CD-ROM) and click “OK.”

(If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN

\TRPCI.WOL\WIN95\”)

12 When prompted to insert the Windows 95 CD-ROM, click on “OK.”

13 Set the path to your Windows 95 files and click on “OK.”

(If you have an HP pre-loaded HDD, set the path statement

C:\MASTERS\WIN95\SYSTEM\CABS\”).

14 Click on “Yes” to restart your computer and finish the installation.

2 Connecting to a Netware 4.11 Server

Windows for Workgroups

2 Connecting to a Netware 4.11 Server

Windows for

Workgroups

Requirements

• HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.

• IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.

• Driver Name: IBMTRPO.LAN Size: 65KB Date: 7/26/96

• Novell Netware server 4.1 that supports Net BEUI, NWLink IPX/SPX, and

NWLink NetBIOS transfer protocols.

Device Configuration

Procedure

1Boot the Vectra to a DOS prompt, and insert the IBM Token-Ring 16/4 PCI

adapter and drivers CD ver 1.

2From the “IBMWOL\IBMTRPCI\LANAID\” directory on your CD-ROM run

“LANAID.EXE.”

3Hit enter for “Software Installation” and verify the following options:

4DOS with Windows v3.1x

5Express Install LAN Client’s NetWare Client & 802.2

6Hit enter to continue, and at the “Express Install of IBM LAN Client”

window, hit enter to install.

7After file copy is complete, remove any diskettes, hit enter four times to

exit, then reboot the computer.

8After Windows loads, open the “Netware User Applications” window, and

double-click the “NetWare User Login” icon.

9Login into the current server to verify connection.

Vectra VL8 Vectra VE7/VE8

Card State - Enabled

Interrupt 11 10(11)

I/O Address C800-h DC00-h

2 Connecting to a Netware 4.11 Server

Windows for Workgroups

(If you do not have the required information to Login, contact your system

administrator)

2 Connecting to a Netware 4.11 Server

Windows 95 SR2

Windows 95 SR2 Requirements

• HP Vectra with Windows 95SR2 installed.

• IBM Token-Ring 16/4 PCI adapter and drivers CD ver 1.2

• Driver Name: W95SETUP.INF Size: 8K Date: 10/18/96

• Novell Netware 4.1 server that supports Net BEUI, NWLink IPX/SPX, and

NWLink NetBIOS transfer protocols.

Device Configuration

Procedure

1With the HP Vectra turned off, install the IBM 16/4 PCI TR adapter card

into a PCI slot.

2Boot the machine to Windows 95, and the Token-Ring card will

automatically be recognized. Click on “Next.”

3When prompted, click on “Other Locations.”

4Insert drivers CD, set the path to “D:\WIN95\” (Where “D” is the drive

letter assigned to your CD-ROM) and click “OK.”

(If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN

\TRPCI.WOL\WIN95\”)

5Click on “OK” to continue the installation.

6Verify that “IBM PCI Token-Ring Adapter, (NDIS2/3)” is listed and click

on “Finish.”

7Click “OK” to provide your Computer and Workgroup names.

8Enter your Computer Name, Workgroup Name, Computer Description,

and click on “Close.”

9When prompted for the “IBM PCI Token-Ring Option Diskette” click on

“OK.”

Vectra VL8 Vectra VE7/VE8

Card State - Enabled

Interrupt 11 10(5)

I/O Address C800-h DC00-h

2 Connecting to a Netware 4.11 Server

Windows 95 SR2

10 In the “Copying Files…” dialogue box, set the path to “D:\DOS\” (Where

“D” is the drive letter assigned to your CD-ROM) and click “OK.”

(If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN

\TRPCI.WOL\DOS\”)

11 When prompted for the file “IBMTRP.VXD”, set the path to “D:\WIN95\”

(Where “D” is the drive letter assigned to your CD-ROM) and click “OK.”

(If you have an HP preloaded HDD, set the path to “C:\MASTERS\LAN

\TRPCI.WOL\WIN95\”)

12 When prompted to insert the Windows 95 CD-ROM, click on “OK.”

13 Set the path to your Windows 95 files and click on “OK.”

(If you have an HP pre-loaded HDD, set the path statement

C:\MASTERS\WIN95\SYSTEM\CABS\”).

14 Click on “Yes” to restart your computer and finish the installation.

Andere Handbücher für Vectra VE6 8

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP PCI-Karte Handbücher

HP PCIe 2-Port 10GbE Bedienungsanleitung

HP 4X - DDR InfiniBand Mezzanine HCA Merkblatt

HP FC HBAs Installationsanleitung

HP VL600 - Vectra - 128 MB RAM Bedienungsanleitung

HP Vectra VL410 Bedienungsanleitung

HP Vectra VEi 7 Bedienungsanleitung

HP Vectra VL6 8 Bedienungsanleitung

HP 673642-B21 Bedienungsanleitung

HP Xw4600 - Workstation - 2 GB RAM Bedienungsanleitung

HP Compaq Pro 6305 Bedienungsanleitung

HP NC150T Bedienungsanleitung

HP 04H8095 Bedienungsanleitung

HP NC570C Bedienungsanleitung

HP StorageWorks Q2300 Bedienungsanleitung

HP Edgeline EL1000 Bedienungsanleitung

HP NC380T Gebrauchsanweisung

HP AB465A Bedienungsanleitung

HP NC1020 Gebrauchsanweisung

HP NC375T Bedienungsanleitung

HP StorageWorks fca2384 Bedienungsanleitung

HP Vectra VL6 6 Bedienungsanleitung

HP Vectra VL6 7 Bedienungsanleitung

HP Model 748 - VME Workstation Bedienungsanleitung

HP A6826A Anleitung zur Verwendung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung