IFM Efector 200 O4H5 Series Bedienungsanleitung

Operating instructions

Diffuse reflection sensor with

background suppression

O4H5xx

706276 / 00 11 / 2012

1 Preliminary note

1.1 Symbols used

►Instruction

> Reaction, result

[…] Designation of pushbuttons, buttons or indications

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference.

2 Functions and features

The diffuse reflection sensor detects objects and materials without contact and

indicates their presence by a switching signal.

Range: → type label.

►Align the diffuse reflection sensor to the object to be detected.

►Secure it to a bracket.

3 Operating and display elements

1: LED

2: [OUT on] button

3: [OUT off] button

Note:

The objects to be detected are to move transversely to the

lens of the sensor.

►In case of other directions of movement it should be

tested before whether safe switching is guaranteed.

4 Electrical connection

The unit must be connected by a qualified electrician.

►The national and international regulations for the installation of electrical

equipment must be adhered to.

►Ensure voltage supply to EN 50178.

►Disconnect power.

►Connect the unit as follows:

Connector











pin 1 = L+

(pin 2 = not connected)

pin 3 = L-

pin 4 = load

Cable











BN = L+

BU = L-

BK = load

Core colours: BN = brown, BU = blue, BK = black

5 Settings

5.1 Sensitivity setting

The sensor is to switch when the object is detected

►Position the object.

►Press [OUT on] for 2 s.

> The sensitivity is set to the object. The LED flashes.

►Remove the object.

►Press [OUT off].

> The sensitivity is set to the background.

> The LED goes out. The setting operation is completed.

The sensor is not to switch when the object is detected

►Position the object (see figure 1) and press [OUT off].

►Remove the object (see figure 2) and press [OUT on].

The settings can also be carried out first without object and then with object.

5.2 Setting of maximum sensitivity

►Align the sensor so that no light is reflected.

The sensor is to switch when the object is detected

►First press [OUT on], then [OUT off].

The sensor is to switch when the object is not detected

►First press [OUT off], then [OUT on].

5.3 Setting unsuccessful

> The LED flashes quickly, 8 Hz.

> The sensor returns to the normal operating mode with unchanged values.

Possible causes

• Insufficient difference in measurements

• Max. programming time of 15 min. exceeded

5.4 Electronic lock

The unit can be locked electronically to prevent unauthorised setting. On delivery

the unit is not locked.

►Press [OUT on] and [OUT off] simultaneously for 10 s.

> Acknowledgement is indicated by a change of the LED

status.

►To unlock repeat this step.

6 Operation

►Check whether the unit operates correctly.

> Display by LEDs.

7 Maintenance, repair, disposal

►Keep the lens of the sensor free from soiling.

►For cleaning do not use any solvents or cleaning agents which could damage

the plastic parts.

►After use dispose of the unit in an environmentally friendly way in accordance

with the applicable national regulations.

Faulty sensors must only be repaired by the manufacturer.

Technical data and further information at www.ifm.com

Inhaltsverzeichnis

Andere IFM Zubehör Handbücher

IFM

IFM OG Bedienungsanleitung

IFM

IFM OMH551 Bedienungsanleitung

IFM

IFM SB1 Series Bedienungsanleitung

IFM

IFM efector200 OOF Series Bedienungsanleitung

IFM

IFM O5D10 Series Bedienungsanleitung

IFM

IFM O3D3 Series Bedienungsanleitung

IFM

IFM LX Series Bedienungsanleitung

IFM

IFM OGD25 Series Bedienungsanleitung

IFM

IFM O6P7 Series Bedienungsanleitung

IFM

IFM O3D300 Bedienungsanleitung

IFM

IFM Efector 200 Series Bedienungsanleitung

IFM

IFM PC3 Series Bedienungsanleitung

IFM

IFM LR3009 Bedienungsanleitung

IFM

IFM SDP110 Bedienungsanleitung

IFM

IFM OID20 Series Bedienungsanleitung

IFM

IFM Efector200 OJ51 Series Bedienungsanleitung

IFM

IFM DTI424 Bedienungsanleitung

IFM

IFM efector 200 OGP2 Series Bedienungsanleitung

IFM

IFM OGH3 Series Bedienungsanleitung

IFM

IFM OY4**S Series Bedienungsanleitung

IFM

IFM 402946 Bedienungsanleitung

IFM

IFM Efector 200 OGE08 Series Bedienungsanleitung

IFM

IFM O3M150 Montageanleitung

IFM

IFM OID20 Series Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung

IFM efector 200 O4H5 Series Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken