Image Access WideTEK 48C Bedienungsanleitung

Operation Manual

File:

WT36C_WT48C_OperationManual-D2.docx

Manual Page 3

2010 – 2015 by Image Access GmbH, Wuppertal, Germany.

Printed in Germany.

Reproduction in whole or in part in any form or medium without express written permission of

Ima

ge Access is prohibited.

Scan2Net

®, WideTEK®and Bookeye®are registered trademarks of Image Access.

All other trademarks are the property

of their respective owners.

Image Access reserves the right to change the described products, the specifications or

documents at any time without prior notice.

For the most recent version, always check our web site

www.imageaccess.de

www.imageaccess.us or the customer service portal at portal.imageaccess.de

Page 4 Manual

Introduction

Dear Customer,

The Image Access team congratulates you on the acquisition of this innovative large

format scanner.

We at Image Access are proud of the work we do; it is the result of our extremely high

standards of production and stringent quality control.

With the WideTEK®36C / WideTEK®48C, Image Access offers an efficient scanner

which covers a wide scope of applications due to its versatility. Its integrated web

based user interface makes all functions available in structured menus.

This operation manual is designed to lead you through all situations which will arise

when using the WideTEK®36C / WideTEK®48C.

For this reason, we ask you to read the manual attentively before starting to work with

the sanner. By doing so, you will avoid operation errors and you can control all

functions from the beginning.

In addition please consider the following points:

•Damages to your unit may have occurred during shipping. Please check for

damages immediately after delivery of the unit. Inform your supplier if damage

has occurred.

•Read and ensure that you understand the safety notes. They were developed

for your protection and safety as well as to protect the unit.

•Regular maintenance conserves the high quality and safety of the

WideTEK®36C / WideTEK®48C during the entire service life.

If you have any further questions, please feel free to contact your local dealer or

Image Access, Inc. directly. Our staff will be happy to help you.

For your daily work with the WideTEK®36C / WideTEK®48C scanner, we wish you

success and complete satisfaction.

Regards

Your Image Access Team

Manual Page 5

About this Manual

Operation Manual

The Operation Manual gives all information about the normal operation and behavior

of the device. It is written for people who only operate the device and do not perform

setup and adjustment procedures. All device elements and software functions are

described in detail, although some of them might never be used. This manual does not

cover any application software. Refer to the appropriate application software manual to

learn about the application software.

Setup Manual

The Setup Manual is written for technical staff with some basic mechanical as well as

software skills. Many resellers will offer on-site installation; therefore, large parts or all

of the setup and assembly manual might not be of interest to the reader. The access

level at which the setup and adjustment processes are performed is called “Power

user”. This “Power user” level is password protected from access by the normal

operator.

All available manuals for this device can be downloaded from our customer service

portal at http://portal.imageaccess.de. Be sure to always check for the latest versions of

these manuals.

This manual is divided into the sections A to E.

Section A describes the hardware of the device and gives an overview of all

components and connectors of the scanner. Remember that this device

is a precise optical instrument and should be handled accordingly.

Note: Optional the WideTEK®36C can be delivered with an appropriate floor

stand. It is recommended to always use the WideTEK®36C in

combination with the floor stand.

Section B describes the functions of the touchscreen and how to operate the

scanner with the touchscreen.

Section C gives a short introduction and basic information about the new user

interface ScanWizard. All details about the interface can be found in the

integrated “Help” texts in the scanner.

Section D informs about the setup levels in general and describes the access level

User in detail.

Section E describes test and troubleshooting procedures.

Section F contains all technical data of the scanner and the manufacturer

declarations concerning safety and electromagnetic compatibility (EMC).

Page 6 Manual

Version History

Version

Published in

Content/Changes/Supplements

A May 2011 Preliminary version.

July 2011

Information after EMC and safety testing and certification added.

A3 September 2011 Chapter C.3.9: New content, former chapter C.3.9

renumbered to

C.3.10.

Content of chapter C.5.2 revised, new screenshots added.

October 2011

Chapter B.6.3.1 added. In Chapter C.3.3 additional information

about “Container” format for multipage output.

Chapter C.3.7.2

added.

FCC note added in chapter E.6.

December 2011

Update Technical Data

April 2012

Update of content of User Settings (FW Vers. 5.71).

New structure in chapter C.3.5 and its subfolder.

B1 March 2013 Valid with firmware 5.8.

The new WideTEK®36C logo has been introduced.

New: Chapter B.5.1. Zonal OCR

Previous chapter B.5.1 and all following chapters renumbered.

New screen screenshots of some kiosk application screens.

June 2013

Section D describes now the “Setup Level”. Former chapter D and

E have been renumbered.

C December 2013

Section C: Content change because of introduction of the new

user interface ScanWizard.

April 2014

Combination of the

WideTEK®36C

WideTEK®48C

operation

manuals in one manual.

Differences between the scanner models will be highlighted.

Chapter B.3.2, B.3.3, B.3.5 and B.3.6 with new content.

Chapter B.1.1, chapter D.1.3.2, chapter D.1.3.4 added.

September 2014

Chapter C.1.1 and C.1.1 added. Table in chapter E.1 modified.

EMC information according to the standard EN 55022

Warning!

This is a class A device. Operation of these

equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the

interference at his own expense.

Manual Page 7

Table of Content

Introduction--------------------------------------------------------------------------4

About this Manual -----------------------------------------------------------------5

Version History ---------------------------------------------------------------------6

AHardware ----------------------------------------------------------------------- 14

A.1 Safety Notes ......................................................................................................14

A.1.1 Marking of Safety Notes 14

A.2 Certification........................................................................................................14

A.3 General Notice...................................................................................................14

A.4 Safety Precautions.............................................................................................15

A.5 Device Location..................................................................................................16

A.6 Maintenance ......................................................................................................17

A.6.1 Touchscreen 17

A.6.2 Surfaces 17

A.6.3 Glass plates 17

A.7 Repair................................................................................................................17

A.8 Content on Delivery............................................................................................18

A.8.1 WideTEK®36C 18

A.8.2 WideTEK®48C 20

A.8.3 Keeping the Transport Box for later use 21

A.9 Device Overview................................................................................................22

A.9.1 WideTEK®36C – Front Side Elements 22

A.9.2 WideTEK®36C – Back Side Elements 22

A.9.3 WideTEK®48C – Front Side Elements 23

A.9.4 WideTEK®48C – Back Side Elements 23

A.9.5 Monitor Connector WideTEK®36C 24

A.9.6 Monitor Connector WideTEK®48C 24

A.9.7 Recovery Key Connector 25

A.10 Connecting to the Power Source........................................................................26

A.10.1 Powering up the Scanner 27

A.10.2 Starting the Scanner from Standby Mode 27

A.10.3 Switching the Scanner to Standby Mode 27

A.10.4 The Help Function 27

Page 8 Manual

Table of Content, part 2

BTouchscreen Operation --------------------------------------------------- 28

B.1 Select Application..............................................................................................28

B.1.1 Document Transport Window 29

B.2 The Kiosk User Interface ...................................................................................30

B.2.1 Control Fields of the Touchscreen 31

B.3 Touchscreen – Document Source......................................................................32

B.3.1 DPI 32

B.3.2 Transport Speed 33

B.3.3 Exposure 34

B.3.4 Format 35

B.3.4.1 Maximum 35

B.3.4.2 Auto 36

B.3.4.3 Crop and Deskew 36

B.3.4.4 DIN 37

B.3.4.5 ANSI 37

B.3.5 Scan Mode 38

B.3.6 Auto Density 39

B.4 Touchscreen – Image Quality............................................................................40

B.4.1 Color Mode 41

B.4.2 File Format 41

B.4.2.1 JPEG 41

B.4.2.2 TIFF 42

B.4.2.3 PNM 42

B.4.2.4 PDF 42

B.4.3 Brightness 43

B.4.4 Contrast 43

B.4.5 Image Sharpness 43

B.4.6 Image Rotation 44

B.4.7 Mirror 44

B.4.8 Invert 44

B.4.9 Despeckle 44

Manual Page 9

Table of Content, part 3

B.5 Touchscreen – Viewer&Job Control...................................................................45

B.5.1 Zonal OCR 47

B.5.2 Job Mode 50

B.5.2.1 Navigating through the list of images 52

B.5.2.2 Moving an image to another position 53

B.5.2.3 Adding an image at an any position to the list 53

B.5.2.4 Deleting an image from the list 53

B.5.2.5 Rescan an image 53

B.5.2.6 Finalizing the Job mode 54

B.5.2.6.1 Job mode time out 54

B.6 Touchscreen – Send To.....................................................................................55

B.6.1 Changing a file name or other entries 56

B.6.2 USB Options 57

B.6.2.1 List of suitable USB storage media 57

B.6.3 Copy Options 58

B.6.3.1 Printer Settings 58

B.6.4 FTP Options 59

B.6.5 Network Options 60

B.6.6 Mail Options 61

B.6.6.1 Transaction modes 62

CSoftware Operation --------------------------------------------------------- 63

C.1 The ScanWizard User Interface .........................................................................64

C.1.1 Online Help 65

C.1.2 Exit ScanWizard 65

C.2 Information.........................................................................................................66

DThe Setup Level-------------------------------------------------------------- 67

D.1 Access Level User .............................................................................................68

D.1.1 Device Info Screen 69

D.1.2 Operation Info Screen 71

D.1.3 User Settings Screen 72

D.1.3.1 Language Selector 73

D.1.3.2 File Name 74

D.1.3.3 Power Saving 75

D.1.3.4 Transport Speed 76

D.1.3.5 Volume 77

D.1.3.6 Splitting Start Page 78

Page 10 Manual

Table of Content, part 4

ETests and Troubleshooting ---------------------------------------------- 79

E.1 Troubleshooting Matrix ......................................................................................79

FTechnical Data---------------------------------------------------------------- 80

F.1 Scanner Specifications ......................................................................................80

F.2 Electrical Specifications.....................................................................................82

F.3 Ambient Conditions............................................................................................83

F.4 Dimensions and Weight.....................................................................................83

F.5 CE Declaration of Conformity ............................................................................84

F.6 FCC Declaration of Conformity..........................................................................86

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Image Access Scanner Handbücher

Image Access

Image Access Bookeye Color Bedienungsanleitung

Image Access

Image Access WideTEK 12 Bedienungsanleitung

Image Access

Image Access WideTEK 25-600 Bedienungsanleitung

Image Access

Image Access WideTEK 48CL Handbuch

Image Access

Image Access WideTEK 42 Bedienungsanleitung

Image Access

Image Access bookeye 3 Bedienungsanleitung

Image Access

Image Access WideTEK 24F Handbuch

Image Access

Image Access Bookeye 4 Benutzerhandbuch

Image Access

Image Access Bookeye 4 Bedienungsanleitung

Image Access

Image Access WideTEK 12 Handbuch

Image Access

Image Access Bookeye 5 V2A Handbuch

Image Access

Image Access Bookeye 5 V2 Handbuch

Image Access

Image Access WideTEK 36CL Handbuch

Image Access

Image Access WideTEK WT36ART-600 Bedienungsanleitung

Image Access

Image Access WideTEK 36 Bedienungsanleitung

Image Access

Image Access bookeye 3 Bedienungsanleitung

Image Access

Image Access Bookeye 5 V1A Handbuch

Image Access

Image Access WideTEK 36ART Handbuch

Image Access

Image Access Bookeye 4 V1A Professional Handbuch

Image Access

Image Access WideTEK 25 Bedienungsanleitung

Image Access

Image Access WideTEK WT42 Bedienungsanleitung

Image Access

Image Access WideTEK 36 DS Handbuch

Image Access

Image Access Bookeye 4 Bedienungsanleitung

Image Access

Image Access WideTEK 36 DS Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung

Innova

Innova 5210 Bedienungsanleitung