Interlogix TruVision NVR 50 Bedienungsanleitung

Content

Contact information 1

Package contents 1

Installation environment 1

Quick install 1

First-time use 1

TVN 50 front and back panels 2

Operating the NVR 50 4

Web browser control 4

Live view mode 4

Configuring the NVR 50 5

Specifications 6

Contact information 6

Contact information

For contact information, see our Web sites:

www.utcfireandsecurity.com, www.interlogix.com or

www.utcfssecurityproducts.eu.

Package contents

The TruVision NVR 50 (model TVN 50) is shipped with

the following items:

• IR (infrared) remote control

• Two AAA batteries for the remote control

• AC power cords (US, Europe, UK)

• USB mouse

• NVR

• CD with software and manuals

• TruVision NVR 50 Quick Start Guide

• TruVision NVR 50 User Manual (on CD)

Installation environment

Refer to the user manual for detailed information, but

observe these important requirements:

• Place the unit in a secure location.

• Ensure that the unit is in a well-ventilated area.

• Do not expose the unit to rain or moisture.

Quick install

Recommended steps for setting up the NVR:

1. Connect all the devices required to the back panel of

the NVR 50. See Figure 2 on page 3.

Basic connections:

Connect monitor A to the BNC, VGA or HDMI

output. Connect the mouse to the USB port in the

front panel.

Optional connections:

All the other connections shown are optional and

depend upon installation requirements.

2. Connect the power cord to the unit and turn on the

power.

3. Set up the unit with the required settings using the

setup Wizard.

First-time use

The NVR 50 has an express installation wizard that lets

you easily configure basic NVR settings when first used.

It configures all cameras simultaneously. The

configuration can then be customized as required.

By default, the setup wizard will start once the NVR has

loaded. The wizard walks you through some of the more

important settings of your NVR. Select the preferred

language for the system and then enter the administrator

password. The default admin password is 1234. It is

strongly recommended that this password is changed.

The wizard will then guide you through the menus to set

the time and date, network configuration, HDD

management, and recording configuration.

When all the required changes have been entered, click

Finish to exit the wizard. The NVR 50 is now ready to

use. Recording starts automatically.

TruVision NVR 50 Quick Start Guide

2 TruVision NVR 50 Quick Start Guide

NVR 50 front and back panels

Figure 1: NVR 50 front panel

Table 1: Front panel elements

Item Name Description

1. Status LEDs Power: Green indicates the NVR is working correctly. Red indicates a fault.

Alarm: Lit indicates an external alarm status or motion.

Tx/Rx: Tx/Rx indicator blinks green when network connection is functioning properly.

HDD: HDD indicator blinks red when data is being read from or written to the HDD.

Ready: Green indicates the device is functioning properly.

Archive: Archive indicator blinks green when record files or pictures are being exported to a USB

or eSATA device.

2. IR receiver Receiver for IR remote.

3. Front Panel Lock You can lock or unlock the front panel with a key.

4. Display buttons Display: Toggles through the various multiviews: full, quad, 1+5, 1+7, 9, and 16.

Sequence: Starts/stops sequencing in live view mode.

A: Selects the main monitor

B: Selects the spot monitor (in live view)

F1: In all-day playback, click to start and stop video clipping.

F2: In live view mode, click to display/hide the time bar.

In all-day playback, click to hide/display the playback control toolbar.

5. Numeric buttons Switch between different cameras in live, PTZ control or playback modes.

6. USB Interfaces Universal Serial Bus (USB) ports for additional devices such as a USB mouse and USB Hard Disk

Drive (HDD).

7. Menu and Search buttons

Playback buttons

Menu: Enter/exit the main menu.

Search: Enter the advanced search menu.

: Jump back to the oldest available video and starts the playback.

: Pause playback.

: Instantly playback the currently selected file. Default time is 1 minute.

Live: Switch to live view mode.

Replay: Replay the current file in playback Starts at the beginning of the file.

TruVision NVR 50 Quick Start Guide 3

Item Name Description

8. Direction

Enter button

The DIRECTION buttons are used to navigate between different fields and items in menus.

In the Playback mode, the left and right button is used to speed up and slow down recorded video.

In Live View mode, these buttons can be used to cycle through channels.

In PTZ control mode, it can control the movement of the PTZ camera.

The ENTER button is used to confirm selection in any of the menu modes.

In single-frame Playback mode, pressing the button will advance the video by a single frame.

9. PTZ buttons Zoom: Use + and – for digital zoom.

Preset: Call up preprogrammed preset positions.

Tour: Call up preprogrammed shadow tours.

10. Archive button Press once to enter quick archive mode. Press twice to start archiving. Indicator blinks green when

data is being written to backup device.

Figure 2: TVN 50 back panel

Table 2: Back panel elements

1. Connect to one CCTV monitors (BNC-type connectors): Main

monitor

2. Connect one audio input to RCA connectors.

3. Connect to a RS-232 device.

4. Connect to a network.

5. Connect to an optional eSATA device such as SATA HDD,

CD/DVD-RM.

6. Connect to a power cord.

7. Connect to speakers for audio output.

8. Connect to a VGA monitor.

9. Connect to a HDTV. The HDMI connection supports both digital

audio and video.

10. Connect to an optional USB device such as a mouse, CD/DVD

burner or HDD.

11. Terminate the line to the dome cameras using this RS-485 switch.

Default is Off.

12. Connect to a PTZ control.

13. Connect to a keyboard (KTD-405 shown)

14. Connect up to 16 alarm input cables to relay outputs.

15. Connect up to four alarm relay outputs.

16. Connect to ground.

4 TruVision NVR 50 Quick Start Guide

Operating the TVN 50

There are several ways to control the unit:

• Front panel

• IR remote control

• Mouse

• Web browser

Front panel

The buttons on the front panel control most functions.

See Figure 1 on page 2 for the locations of the controls.

IR remote control

The IR remote control buttons are similar to those on the

front panel. Place the two AAA batteries in the remote

control.

To connect the remote control to the NVR:

1. Press Menu on the front panel or right-click the

mouse and select Menu. The main menu screen

appears.

2. Select Display mode settings > Monitor.

3. Check and remember NVR device address value.

The default value is 255. The device address is valid

for all IR controls.

4. On the remote control press the Device button.

5. Enter the device address value. It must be the same

as that on the TVN 50.

6. Press ENTER on the remote or front panel.

USB mouse

The USB mouse provided with the TVN 50 operates all

the functions of the NVR, unlike the front panel, which

has limited functionality. The mouse lets you navigate

and make changes to settings in the user interface.

Connect the mouse to the NVR by plugging the mouse

USB connector into the USB port on the front panel. The

mouse is immediately operational and the pointer should

appear.

Web browser control

The TVN 50 Web browser lets you view, record, and

play back videos as well as manage all aspects of the

NVR from any PC with Internet access. The browser’s

easy-to-use controls give you quick access to all NVR

functions.

To access the unit, open a Web browser and enter the

IP address assigned to the NVR as a Web address. In

the login screen, enter the default user ID and password:

• User ID: admin

• Password: 1234

The default values for TVN 50 network settings are:

• DHCP: Enabled by default.

• IP address - 192.168.1.82

• Subnet mask - 255.255.255.0

• Gateway address - 192.168.1.1

• Server Port: 8000

• HTTP Port: 80

Figure 3: Web browser interface

Live view mode

Live mode is the normal operating mode of the unit

where you watch live pictures from the cameras.

Regularly used functions in live view can be quickly

accessed by clicking the right-button of the mouse on

the camera image. The shortcut pop-up toolbar appears.

See Figure 4 on page 5 for a description of the functions

available.

TruVision NVR 50 Quick Start Guide 5

Figure 4: The mouse menu for the main monitor

The list of commands available depends on which

monitor is active; main or spot (monitor B). See

Table 3 below.

Table 3: Mouse menu for monitor A (main monitor)

Item Name Description

1. Menu Enter the Main menu.

This option is not available from monitor B.

2. Single camera Switch to a full-screen view for the selected

camera from the dropdown list.

3. Multi camera Switch between the different multiview

options from the dropdown list.

4. Previous screen Displays the previous camera.

5. Next screen Displays the next camera.

6. Start auto-switch Turn on sequence mode. The screen

automatically sequences between cameras.

Go to Menu > Display Mode Settings >

Layout > Dwell Time to set up.

7. All-day playback Playback the recorded video of the selected

day from the selected camera. The current

day is selected by default.

8. Monitor B Switch between monitors A (main) and B

(spot).

9. Advanced search Enter the advanced video search menu.

10. Close timebar Open/close the time bar.

Configuring the TVN 50

The TVN 50 has an icon-driven menu structure that

allows you to configure the unit’s parameters. Each

command icon displays a screen that lets you edit a

group of settings. Most menus are available only to

system administrators.

Refer to the TVN 50 user manual for detailed information

on configuring the unit.

To access the main menu from live view:

•Press the Menu button on the remote control or front

panel

- Or -

•Right-click the mouse and select Menu from the

pop-up menu.

The main menu screen appears. Move the mouse over a

command icon in the menu toolbar and click to select it.

Description of the command icons in the menu

toolbar:

Configures display settings.

Configures camera settings.

Configures recording settings.

Configures standard network settings.

Configures alarm settings.

Configures PTZ settings.

Configures user settings.

Configures system settings.

Provides reference information to the various

toolbars and menus within the interface.

Provides access to logout, reboot and shutdown

options.

6 TruVision NVR 50 Quick Start Guide

Specifications

Power supply 100 to 240 VAC,

6.3 A, 50 to 60 Hz

Power consumption

(without HDD)

TVN 5032

<= 45 W

Operating temperature -10 to +55 ºC

(50 to 131 °F)

Relative humidity 10 to 90%

Dimensions

(W x H x D)

445 × 470 × 90 mm

(17.5 × 18.5 × 3.5 in.)

Weight ≤8 kg (≤17.6 lb.)

(without HDD or DVD-R/W)

Contact information

North America:

855-286-8889

[email protected]

Latin America:

561-998-6114

[email protected]

Web site:

www.interlogix.com/customer-support

EMEA:

See specific Country listings at:

www.utcfssecurityproducts.eu/support

Andere Handbücher für TruVision NVR 50

Inhaltsverzeichnis

Andere Interlogix DVR Handbücher

Interlogix

Interlogix TruVision TVR-1108-1T Bedienungsanleitung

Interlogix

Interlogix TruVision SVR Bedienungsanleitung

Interlogix

Interlogix TruVision DVR 41 Bedienungsanleitung

Interlogix

Interlogix TruVision NVR 21 Bedienungsanleitung

Interlogix

Interlogix TruVision NVR 70 Bedienungsanleitung

Interlogix

Interlogix TruVision DVR 12HD Bedienungsanleitung

Interlogix

Interlogix TruVision DVR 44HD Bedienungsanleitung

Interlogix

Interlogix TruVision DVR 12 Bedienungsanleitung

Interlogix

Interlogix TruVision NVR 71 Bedienungsanleitung

Interlogix

Interlogix truVision 11c Series Bedienungsanleitung

Interlogix

Interlogix TruVision DVR 20 Bedienungsanleitung

Interlogix

Interlogix TVR 11 Bedienungsanleitung

Interlogix

Interlogix TVR 12 Bedienungsanleitung

Interlogix

Interlogix truVision DVR 31 Bedienungsanleitung

Interlogix

Interlogix TruVision DVR 60 Bedienungsanleitung

Interlogix

Interlogix TruVision DVR 41 Bedienungsanleitung

Interlogix

Interlogix TruVision NVR 21 Bedienungsanleitung

Interlogix

Interlogix TruVision 70 Bedienungsanleitung

Interlogix

Interlogix TruVision DVR 45HD Bedienungsanleitung

Interlogix

Interlogix TruVision NVR 22 Bedienungsanleitung

Interlogix

Interlogix TruVision DVR 12HD Bedienungsanleitung

Interlogix

Interlogix TVR 11c Bedienungsanleitung

Interlogix

Interlogix TVN 11 Bedienungsanleitung

Interlogix

Interlogix TruVision DVR 15HD Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

FSM

FSM Colibri Grande PRO Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung