Intermec EasyCoder PD4 Bedienungsanleitung

Installation

Instructions

EasyCoder PD4

Cutter

ii EasyCoder PD4 Cutter Installation Instructions

Intermec Technologies Corporation

Corporate Headquarters

6001 36th Ave. W.

Everett, WA 98203

U.S.A.

www.intermec.com

e information contained herein is proprietary and is provided solely for the

purpose of allowing customers to operate and service Intermec-manufactured

equipment and is not to be released, reproduced, or used for any other pur-

pose without written permission of Intermec.

Information and speciﬁcations contained in this document are subject to

change without prior notice and do not represent a commitment on the part

of Intermec Technologies Corporation.

e word Intermec, the Intermec logo, and EasyCoder are either trademarks

or registered trademarks of Intermec Technologies Corporation.

roughout this manual, trademarked names may be used. Rather than put

a trademark (™ or ®) symbol in every occurrence of a trademarked name, we

state that we are using the names only in an editorial fashion, and to the ben-

eﬁt of the trademark owner, with no intention of infringement.

ere are U.S. and foreign patents pending.

EasyCoder PD4 Cutter Installation Instructions iii

Contents

Before You Begin........................................................................... iv

Safety Summary.............................................................. iv

Global Services and Support ............................................ v

1 Installation

Installing the Cutter.......................................................................2

iv EasyCoder PD4 Cutter Installation Instructions

Before You Begin

is section provides you with safety information, technical support informa-

tion, and sources for additional product information.

Safety Summary

Your safety is extremely important. Read and follow all warnings and cautions

in this document before handling and operating Intermec equipment. You can

be seriously injured, and equipment and data can be damaged if you do not

follow the safety warnings and cautions.

Do not repair or adjust alone

Do not repair or adjust energized equipment alone under any circumstances.

Someone capable of providing ﬁrst aid must always be present for your safety.

First aid

Always obtain ﬁrst aid or medical attention immediately after an injury. Never

neglect an injury, no matter how slight it seems.

Resuscitation

Begin resuscitation immediately if someone is injured and stops breathing.

Any delay could result in death. To work on or near high voltage, you should

be familiar with approved industrial ﬁrst aid methods.

Energized equipment

Never work on energized equipment unless authorized by a responsible

authority. Energized electrical equipment is dangerous. Electrical shock from

energized equipment can cause death. If you must perform authorized emer-

gency work on energized equipment, be sure that you comply strictly with

approved safety regulations.

EasyCoder PD4 Cutter Installation Instructions v

Before You Begin

Global Services and Support

Warranty Information

To understand the warranty for your Intermec product, visit the Intermec web

site at http://www.intermec.com and click Service & Support. e Intermec

Global Sales & Service page appears. From the Service & Support menu, move

your pointer over Support, and then click Warranty.

Web Support

Visit the Intermec web site at http://www.intermec.com to download our

current documents in PDF format. To order printed versions of the Intermec

manuals, contact your local Intermec representative or distributor.

Visit the Intermec technical knowledge base (Knowledge Central) at http://

intermec.custhelp.com to review technical information or to request technical

support for your Intermec product.

Telephone Support

Contact your local Intermec representative. To search for your local representa-

tive, from the Intermec web site, click Contact.

Who Should Read This Document?

is Installation Instructions provides you with information about how to

install the EasyCoder PD4 Cutter.

Related Documents

e Intermec web site at http://www.intermec.com contains our current docu-

ments that you can download in PDF format. To order printed versions of the

Intermec manuals, contact your local Intermec representative or distributor.

vi EasyCoder PD4 Cutter Installation Instructions

Before You Begin

EasyCoder PD4 Cutter Installation Instructions 1

1 Installation

is chapter describes how to install the EasyCoder

PD4 Cutter.

2 EasyCoder PD4 Cutter Installation Instructions

Chapter 1 — Installation

Installing the Cutter

1Unpack your EasyCoder PD4 cutter kit and check to see that all parts are

included. If not, contact your sales representative.

Front cover

Screw

2Make sure the printer is unplugged. Remove the screw

that holds the front cover. Remove the front cover.

Cutter

mechanism

Cutter cover

2 screws

with washers

2 cable

clips

Cutter tray

EasyCoder PD4 Cutter Installation Instructions 3

Chapter 1 — Installation

Tear bar

Screws

3Open the side door and remove the tear bar, which is

held by two Phillips screws.

4Attach the cutter mechanism to the printer using the two Phillips

screws and washers included in the kit.

4 EasyCoder PD4 Cutter Installation Instructions

Chapter 1 — Installation

Cable clips

Cutter cable

Cutter

connector

5Plug in the cable from the cutter into the rear one of the two connectors in

the center section and fasten the cable to the bottom plate using the two

cable clips included in the kit.

6Attach the cutter cover onto the cutter mechanism by ﬁrst connecting the

hooks on the back side of the cover over the cutter mechanism and then

locking the cover with the screw at the bottom.

Andere Handbücher für EasyCoder PD4

Inhaltsverzeichnis

Andere Intermec Druckerzubehör Handbücher

Intermec

Intermec CN3 Series Bedienungsanleitung

Intermec

Intermec EasyCoder F2 Bedienungsanleitung

Intermec

Intermec EasyCoder PC4 Bedienungsanleitung

Intermec

Intermec PA30 Bedienungsanleitung

Intermec

Intermec PB42 Handbuch

Intermec

Intermec EasyCoder PF2i Bedienungsanleitung

Intermec

Intermec 869 RFID Reader Betriebsanleitung

Intermec

Intermec EasyCoder 101 Handbuch

Intermec

Intermec EasyCoder 4420 Bedienungsanleitung

Intermec

Intermec EasyCoder PF2i Bedienungsanleitung

Intermec

Intermec PB42 Bedienungsanleitung

Intermec

Intermec EasyCoder 501 E Bedienungsanleitung

Intermec

Intermec EasyCoder PF2i Bedienungsanleitung

Intermec

Intermec EasyCoder 501 SA Bedienungsanleitung

Intermec

Intermec EasyCoder PF2i Bedienungsanleitung

Intermec

Intermec EasyCoder PD4 Bedienungsanleitung

Intermec

Intermec PC43t Bedienungsanleitung

Intermec

Intermec EasyCoder 3400d Bedienungsanleitung

Intermec

Intermec EasyCoder PF2i Bedienungsanleitung

Intermec

Intermec PC43d Bedienungsanleitung

Intermec

Intermec 3240 Bedienungsanleitung

Intermec

Intermec EasyCoder F2 Bedienungsanleitung

Intermec

Intermec PM4I Bedienungsanleitung

Intermec

Intermec 3400 Bedienungsanleitung

Beliebte Druckerzubehör Handbücher anderer Marken

Star Micronics

Star Micronics TSP800 Series Bedienungsanleitung

REA

REA JET HR pro 2K Bedienungsanleitung

HP Laserjet,Color Laserjet 4si Bedienungsanleitung

oliser

oliser MS 45 Bedienungsanleitung

Roland

Roland DU2-64 Anleitungen und Rezepte

Xerox

Xerox EFI EXP6000 Bedienungsanleitung

Canon

Canon Finisher-T1 Bedienungsanleitung

Sharp

Sharp FO-1MK Bedienungsanleitung

Labelmate

Labelmate PM-300 Bedienungsanleitung

Epson

Epson T6248 Betriebsanleitung

Epson

Epson OT-BZ20 Bedienungsanleitung

Canon

Canon TonerRobot EP-27 Bedienungsanleitung

Ricoh

Ricoh LCIT RT5100 Kurzanleitung

GBC

GBC 16 Series Bedienungsanleitung

Canon

Canon INNER 2-WAY TRAY-E1 Bedienungs- und Wartungshandbuch

Develop

Develop SD-509 Bedienungsanleitung

Kyocera

Kyocera KM-6230 Handbuch

Triumph Adler

Triumph Adler DF-710 Handbuch