Jbc CD-BQE Bedienungsanleitung

Compact Soldering Station

Ref. CD-BQE

INSTRUCTION MANUAL

www.jbctools.com

Packing List

The following items are included:

Power Cord .................................................... 1 unit

Ref. 0009417 (100V/120V)

0009401 (230V)

Manual ............................................................. 1 unit

Ref. 0022909

CD Control Unit ............................................1 unit

Ref. CD-1E (120V)

CD-2E (230V)

CD-9E (100V)

Brass Wool .................................................... 1 unit

Ref. CL6210

Sponge ............................................................ 1 unit

Ref. S0354

General Purpose Handle ...................... 1 unit

Ref. T245-A

Compact Soldering Station

Ref. CD-BQE

www.jbctools.com

INSTRUCTION MANUAL

Power Socket

Main switch

Fuse

Equipotential connectionUSB-B connector

Features

General Purpose

Handle

Ref. T245-A

Cable collector

Quick Tip Changer

Process

Screen

Adjustable Stand:

Intelligent Heat Management

Tip Cleaner brass wool

with antisplash

membrane

www.jbctools.com

Adjustable stand Cable collector (Ref. CC3702)

Adjust the tool stand to suit

your work position.

Fix the cable on the collector so that the working area is free of

cable.

Tip Cleaner

Select the option to suit your needs and improve the thermal transfer of the tip.

Brass Wool

Ref. CL6210

Very effective

cleaning method.

Leaves a small layer

of solder on the tip,

preventing oxidation

between cleaning

and rewetting.

Splashguard

Ref. 0 017576

When using the brass wool, it prevents

splashing of solder particles

Antisplash Membrane

R ef. 0 017574

Prevents splashing and keeps the work area

clean.

Wiper

Ref. CL0160

A temperature resistant receptacle

for removing excess solder by gently

tapping or wiping.

If the tip is very dirty,

JBC first recommends

cleaning it with the wiper

to remove excess solder.

Removing the Splashguard

1. Unlock the splashguard. 2. Lift off.

Lock

More cleaning options (not supplied):

Inox Wool

Ref. CL6205

Provides a superior

cleaning of the tip.

Metal Brush

Ref. CL6220

When used carefully,

it provides a more

thorough cleaning.

Sponge

Ref. S0354

Tapping:

Tap gently to remove excess

solder.

Wiping:

Use the slots to remove

remaining particles.

Wiper

Ref. CL0160

The least harmful cleaning

method. Keep the sponge

damp with distilled water

when working to avoid tip

wear.

www.jbctools.com

ø 1

ø 1,5

ø 3,5

AAB

Quick Tip Changer

Changing the Grips

Conical Chisel Conical-bent Bevel Special models

Compatible cartridges

The CD-B stations work with

C245 cartridges.

Find the model that best

suits your soldering needs in

www.jbctools.com

Save time and change cartridges safely without switching the station off.

1. Removing 2. Inserting 3. Fixing

Place the handpiece in the

extractor and pull to remove

the cartridge.

Place the handpiece on top

of the new cartridge and

press down slightly.

Use the holes for fixing the

cartridge* as follows:

A. For straight C210.

B. For curved C210.

C. For C245.

*Important

It is essential to insert the

cartridges as far as the mark

for a proper connection.

Mark

Put the slide-on tabs into the

new grip.

Push the grip with the tabs

onto the handle.

To remove the tabs, hold the

grip and pull. Use a pliers if

necessary.

tabs

new grip

Easily replace the Grips for T245-A and T245-C using the slip-on tabs (Ref. 0016057)

1. Inserting tabs 2. Inserting handle 3. Removing tabs

USB Connector

Download the latest software from our website to improve your soldering station.

JBC Updater

www.jbctools.com/software.html

Update the station software via USB connection:

Cable USB AB

JBC

Manager

JBC

Updater

JBC Manager

www.jbctools.com/manager.html

Manage and monitor as many stations as your PC can handle by using the JBC Manager.

You can export data to another PC.

Create graphs of the

soldering process in

real time with power

and temperature data.

Manager Settings

Change settings for a

group of JBC stations

at the same time.

any JBC

station

USB

Hub

Cable USB AB

www.jbctools.com

Power 5%

350

Selected temp

350

Sleep temp 150

Sleep

350

Tool in the stand, no heat

Hibernation

350

Operation

The JBC Most Efficient Soldering System

This revolutionary technology is able to recover tip temperature extremely quickly.

This allows the user to work at a lower temperature.

As a result, tip life increases by 5.

· Change temperature

(from 90 to 450ºC)

· Select temperature levels

· Fix one temperature

· Change Sleep temperature

· Set Sleep delay

(from 0 to 9 min or no Sleep)

· Change Hibernation delay

(from 0 to 35 min)

Long time in

the stand

1. Work 2. Sleep 3. Hibernation

When the tool is lifted from the

stand the tip will heat up to the

selected temperature.

When the tool is in the stand,

the temperature falls to the

preset sleep temperature.

After longer periods of

inactivity, the power is cut off

and the tool cools down to

room temperature.

Main menu

4 Counters

Program version

Exit

1 Reset settings

Station settings

Tool settings

Hibernation hours 0

No tool hours 0

6 Sleep cycles

Tool 210

Back

Fix one temp -----

Temp levels set OFF

Sleep delay 0 min

5 Help text OFF

6 Beep ON

Change PIN

1 Temp unit

Celsius

Maximum temp 400

Minimum temp 200

Metronome ----

Plugged hours 0

Working hours 0

Sleep hours 0

Counters

Tool settings

Station settings

Selected temp.

350

Power 5%

Fixed temp.

350

Levels ºC

270 350 400

-10

Sleep temp 150

Hibernationdelay 10 min

Temp adjust + O

Tool 210

Back

350

Menu Screen

Default PIN: 0105

The work screen provides

useful information of tool

status in real time.

Work Screen

Control Process

Displays a specific fixed temp.

Shown when you have selected

temp. levels. The values must be

adjusted for the task.

“Temp. Adjust” parameter.

It provides a more precise

adjustment between the selected

temp and the actual one.

www.jbctools.com

Station Settings

Minimum temperature

Set the minimum temperature

to work with.

Min. temp. by default is 200ºC

(392ºF). This is considered to

be a proper starting point for

leaded applications.

Maximum temperature

Set the maximum

temperature to work with.

Max. temp by default is 400°C

(750°F). This is considered

high enough to work with

most lead-free applications.

Temperature unit

Celsius (ºC) or Fahrenheit (ºF)

RecommendationsParameter description

N/a

Warnings

The station temperature

range is 90-450ºC

(190-840ºF). Change the

temperature limits when

working with less common

applications such as low / high

melting point soldering (HMP)

or plastics (e. g. riveting).

In most cases,

working with temperatures

over 400°C (750°F) can

damage the PCB and its

components. Even in short

time periods of tip contact

with the soldering joint, the

flux may not work properly

and could seriously reduce

tip life. If the solder joint

requires more power

(e.g. multilayered or high

dissipation boards), JBC

strongly recommends using

other aids like preheaters.

Be careful when using these parameters as they may reduce the tip life if not used properly.

Please follow the recommended guidelines:

Parameters

Metronome

This activates a beep sound.

Frequencies vary from 1 to 50

seconds.

Help text

Activate this parameter to

receive info from the system.

Beep

Enable/disable the beep

sound of the keypad.

Change pin

Change the default security

PIN number (0105).

The PIN must be entered every

time a parameter is changed.

Useful for setting a work rate

in repetitive jobs. The beep

lets you know the length of

time the tip must be in contact

with the soldering joint.

N/a

Inhaltsverzeichnis

Andere jbc Lötpistole Handbücher

Beliebte Lötpistole Handbücher anderer Marken

Bakon

Bakon 3200 Bedienungsanleitung

Proxxon

Proxxon Gaslotset MGS Bedienungsanleitung

HAKO

HAKO FX-8804 Bedienungsanleitung

SATA

SATA 02002A Bedienungsanleitung

Velleman

Velleman HRJA151 Bedienungsanleitung

Weller

Weller WSM 1 Bedienungsanleitung

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Montageanleitung

ersa

ersa i-CON 1V Bedienungsanleitung

Hakko Electronics

Hakko Electronics FX-100 Bedienungsanleitung

Weller

Weller WAD 101 Bedienungsanleitung

Weller

Weller WXD 2 Bedienungsanleitung

AlienTek

AlienTek T100 Bedienungsanleitung

Atten

Atten ATETOOL AT-689A Bedienungsanleitung

Surtek

Surtek 112554 Abmessungen und Installationsanleitung

Parkside

Parkside PLBS 30 A1 Bedienungsanleitung

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Bedienungsanleitung

Weller

Weller WX1 Bedienungsanleitung

multicomp pro

multicomp pro MP740893 Bedienungsanleitung

jbc CD-BQE Bedienungsanleitung

Beliebte Lötpistole Handbücher anderer Marken