Ken A Vision Comprehensive Scope 2 Bedienungsanleitung

Megapixel Digital

Comprehensive Scope 2 (USB 2.0)

Instruction Manual

T-19541

T-19641

Thank you for purchasing Megapixel Digital Comprehensive Scope 2. This is

a high quality microscope comes with a built-in 1.3 megapixel (CMOS)

camera which will allow you to record single images, and time-lapse movies

and movies to your computer using the USB 2.0 connection. Utilizing your

computer's projection connection (usually a VGA connection) images can

simultaneously be projected onto a screen, LCD or Plasma Monitor or to a

DVR for presentation to a larger audience. Combined with Ken-A-Vision's

unique Applied Vision™ Software, you have purchased a powerful and

uniquely outstanding product for microscopy. The software will also allow

Network streaming, so that images may be easily shared.

Specifications

Ken-A-Vision Product # T-19541 T-19641

1.3 Megapixel CMOS Camera X X

Resolution - Full Screen Imaging 1280 x 1040 X X

USB 2.0 Connection X X

Applied Vision ™ Software X X

Head Type MONOCULAR BINOCULAR

10x Widefield Eyepiece(s) with pointer X X

Diopter on one Eye tub X X

Objectives (DIN) 4x, 10x, 40x, 100xR X X

Coarse/fine Focal Adjustment X X

Reverse Nosepiece - easy slide insertion,

manipulation

Abbé Condenser with Iris Diaphragm X X

Mechanical Stage (sub-stage) X-Y X X

Ken-A-Vision Cool Lighting Patented LED bright light X X

Dimmer (Rheostat) - easy adjustment transmitted light X X

Carrying handle X X

Cordless Microscope charger; storage compartment X X

Comprehensive 2 Microscope (Cordless) X X

Microscope Preparation

Carefully unpack your microscope from the packing carton.

Plug the unit it to charge the batteries of the microscope itself. The

Ken-A-Vision Comprehensive Scope 2 microscope base is a cordless unit, and

the batteries should immediately be charged to ensure longevity of use.

NOTE: It is the property of batteries to 'leak' charge over time. ALWAYS Store

Unit Charged after any use over six hours. Storage for a long period of time

of a discharged unit may result in the inability of the batteries being recharged

and then needing replacement. Care of batteries will give them a long life

span.

While charging the unit (or later):

• Make sure all eyepieces are in place.

• Carefully check that the objective lenses are firmly screwed into the

nosepiece. (DO NOT OVERTIGHTEN).

• Check the fine and coarse focus 'tension'. The knobs are oversized and

were designed for ergonomic ease of gripping. Both knobs should turn

easily to change focus.

• The stage should not drift or slip down on its own, at any time.

• Check the stage stop safety feature. The stage stop is a thumb screw with

a lock nut found just behind the stage. To check the stop, first place a

prepared slide in position for viewing. Move the coarse focus until the

object and stage are as close together as they can be. Look at the slide

and turn the 40x objective into place. This objective should be very close

to the slide, but not touching. If objective lens does not fit over the top of

a standard, cover slip covered slide, then stage stop is out of adjustment.

• Turn on microscope; be sure dimmer (rheostat) changes the amount of

light coming from the illuminator.

Microscope itself should now be ready for use.

Camera Preparation

Plug the narrower end of the USB 2.0 cord into the back of the camera body.

Plug the wider end of the USB 2.0 cord into the USB port of your computer.

Follow instructions for installing Applied Vision ™ Software onto your

computer. Once software is loaded, click on the Applied Vision Icon on your

desk top and you should see an image from the microscope camera. If no

picture first be sure you have turned on the light of the microscope and both

ends of the USB cord are attached. If either were not true, you may have to

're-boot' the Applied Vision ™ Software to activate the camera.

The camera receives its power from the USB connection, there is no power

cord. The camera draws NO power from the batteries or microscope charger.

5615 Raytown Road • Kansas City, MO 64133 U.S.A.

Tel.: 816-353-4787 • Fax: 816-358-5072

email:info@ken-a-vision.com • www.ken-a-vision.com

INS-SC12D

Therefore the environmental carbon 'footprint' of the camera itself is zero,

since its source of power is the computer. The computer does have an

environmental carbon 'footprint', but even this is very minimal, and the camera

is not increasing the computer 'footprint'.

Accessories

If you are interested in purchasing accessories or replacement parts for your

T-19541 or T-19641, visit the Ken-A-Vision Web site,

http://store.kenavision.com/catalog/ or contact your local Ken-A-Vision

Dealer.

Ken-A-Vision reserves the right to make design improvements and other changes in accordance with the

latest technology. There is no obligation to make changes in products already manufactured. Patents

PRODUCT SERVICE

TUV

geprufte

sicherhelt

Andere Handbücher für Comprehensive Scope 2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ken A Vision Mikroskop Handbücher

Ken A Vision

Ken A Vision Digital Comprehensive Scope 2 Bedienungsanleitung

Ken A Vision

Ken A Vision T-2701 Bedienungsanleitung

Ken A Vision

Ken A Vision Research Scope T-29041 Bedienungsanleitung

Ken A Vision

Ken A Vision T-3300 Bedienungsanleitung

Ken A Vision

Ken A Vision T-2701 Bedienungsanleitung

Ken A Vision

Ken A Vision T-1754 Bedienungsanleitung

Ken A Vision

Ken A Vision T-1955 Bedienungsanleitung

Ken A Vision

Ken A Vision Professor Stereo ESH200 Bedienungsanleitung

Ken A Vision

Ken A Vision kena T-1050 Bedienungsanleitung

Ken A Vision

Ken A Vision PrepScope T-1252 Bedienungsanleitung

Ken A Vision

Ken A Vision Professor ESH101 Bedienungsanleitung

Ken A Vision

Ken A Vision Comparison Scope 2 T-19241C Bedienungsanleitung

Ken A Vision

Ken A Vision T-1953B Bedienungsanleitung

Ken A Vision

Ken A Vision Microprojector 2 Bedienungsanleitung

Ken A Vision

Ken A Vision T-1955 Bedienungsanleitung

Ken A Vision

Ken A Vision T-1941 Bedienungsanleitung

Ken A Vision

Ken A Vision X2000 Handbuch

Ken A Vision

Ken A Vision Dual Purpose Scope 2 Bedienungsanleitung

Ken A Vision

Ken A Vision PrepScope T-1252C Bedienungsanleitung

Ken A Vision

Ken A Vision VisionScope T-2400 Bedienungsanleitung

Ken A Vision

Ken A Vision VisionScope 2 T-22011 Bedienungsanleitung

Ken A Vision

Ken A Vision Professor Stereo ESH200 Bedienungsanleitung

Ken A Vision

Ken A Vision VisionScope 2 T-22001 Bedienungsanleitung

Ken A Vision

Ken A Vision VisionScope 2 Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung