KERN Optics OZL-45R Bedienungsanleitung

OZL-45R-BA-e-1510

KERN & Sohn GmbH

Ziegelei 1

D-72336 Balingen

E-mail: [email protected]

Tel: +49-[0]7433- 9933-0

Fax: +49-[0]7433-9933-149

Internet: www.kern-sohn.com

User instructions

Stereo zoom microscope

KERN OZL-45R

OZL 456

Version 1.0

01/2015

OZL-45R-BA-e-1510 2

KERN OZL-45R

Version 1.0 01/2015

User instructions

Stereo zoom microscope

Table of contents

1Before use....................................................................................3

1.1 General notes............................................................................................................................ 3

1.2 Notes on the electrical system................................................................................................ 3

1.3 Storage ...................................................................................................................................... 4

1.4 Maintenance and cleaning....................................................................................................... 5

2Nomenclature...............................................................................6

3Basic data.....................................................................................7

4Assembly......................................................................................8

5Operation and functionality.......................................................10

5.1 Getting started........................................................................................................................ 10

5.2 Adjusting the interpupillary distance................................................................................... 10

5.3 Adjusting the magnification.................................................................................................. 10

5.4 Dioptre adjustment and focussing ....................................................................................... 11

5.5 Adjusting the stand................................................................................................................ 12

5.6 Using eye cups / High Eye Point eyepieces ........................................................................ 13

5.7 Lighting control ...................................................................................................................... 14

5.8 Using external illumination units.......................................................................................... 15

5.9 Changing the bulb.................................................................................................................. 15

6Optical data ................................................................................16

7Features......................................................................................16

8Trouble shooting........................................................................17

9Service........................................................................................18

10 Disposal......................................................................................18

11 Further information....................................................................18

3 OZL-45R-BA-e-1510

1 Before use

1.1 General notes

You must open the packaging carefully, to make sure that none of the accessories in

the packaging fall on the floor and get broken.

In general, microscopes should always be handled carefully because they are

sensitive precision instruments. When using or transporting the microscope it is

particularly important to avoid abrupt movements, as this may damage the optical

components.

You should also avoid getting dirt or finger prints on the lens surface, because in

most cases this will reduce image clarity.

To maintain the performance of the microscope, it must never be disassembled. So

components such as lenses and other optical elements should be left as they were

before use. Also the electrical parts in the base of the device must not be tampered

with, as in this area there is an additional risk of triggering an electric shock.

1.2 Notes on the electrical system

Before connecting to a mains power supply, you must make sure that you are using

the correct input voltage. The information to select the correct power supply is

located on the device, on the rear of the stand base. You must comply with this

information. If you do not comply with these specifications, then fires or other

damage to the device could occur.

The main switch must also be switched off before the mains cable is connected. In

this way you will avoid triggering an electric shock.

If you are using an extension cable, then the mains cable you use must be earthed.

When carrying out any procedures whereby you come into contact with the electrical

system of the device, such as, for example, changing the bulb, only carry out these

procedures when the power is disconnected.

OZL-45R-BA-e-1510 4

1.3 Storage

You should ensure that the device is not exposed to direct sunlight, temperatures

which are too high or too low, vibrations, dust or a high level of humidity.

The ideal temperature range is between 0 and 40°C and a relative humidity of 85%

should not be exceeded.

The device should always be located on a rigid, smooth, horizontal surface.

When the microscope is not being used, you should fit the objective cap and cover

the microscope with the enclosed dust protective cover.

If the eyepieces are being stored separately, the protective caps must be fitted to the

tube connectors. In most cases, if dust and dirt gets inside the optical unit of a

microscope this can cause irreversible errors or damage.

The best way to store accessories which consist of optical elements, such as, for

example, eyepieces and objectives, is in a dry box with desiccant.

5 OZL-45R-BA-e-1510

1.4 Maintenance and cleaning

In any event, the device must be kept clean and dusted regularly.

If any moisture should be occur, before you wipe down the device you must ensure

that the mains power is switched off.

When glass components become dirty, the best way to clean them is to wipe them

gently with a lint-free cloth.

To wipe oil stains or finger prints off the lens surface, moisten the lint free cloth with a

mixture of ether and alcohol (70 / 30 ratio) and use this to clean the lens.

You must be careful when handling ether and alcohol, as these are highly flammable

substances. You must therefore keep it away from naked flames and electrical

devices which can be switched on and off, and only use it in well-ventilated rooms.

However organic solutions of this type should not be used to clean other components

of the device. This could lead to damage to the paint finish. To do this, it is sufficient

to use a neutral cleaning product.

You could also use the following cleaning products to clean the optical components:

Special cleaner for optical lenses

Special optical cleaning cloths

Bellows

Brush

When handled correctly and checked regularly, the microscope should give many

years of efficient service.

Should repairs still be necessary, please contact your KERN dealer or our Technical

Department.

OZL-45R-BA-e-1510 6

2 Nomenclature

7 OZL-45R-BA-e-1510

3 Basic data

Optical system

Greenough

Dimmable lighting

Yes (LED ring lighting only)

Magnification ratio

6.7:1

Tube

angled at 45°

Interpupillary distance

55 –75 mm

Dioptre adjustment

On both sides

Packaging dimensions WxDxH

345x320x470 mm

Standard configuration

Model

KERN

Tube

Eyepiece

Field of view

Objective

Zoom

Stand

Illumination

OZL 456

Binocular

HSWF 10x Ø 23 mm

Ø 33 –5

0.75x –5.0x

mechanical

1W LED (reflected light)

0.21W LED (transmitted light)

OZL-45R-BA-e-1510 8

4 Assembly

The first step is to position the microscope stand on a firm, level surface.

The holder is firmly attached to the pillar of the stand. You can then fit the

microscope head to the holder, by passing the objective through the holder ring until

the rest of the head is above the ring.

Please see section 5.5 for more details on adjusting the stand.

The head must then be fixed in a suitable position, using the small screw on the right

of the holder ring.

Ideally it is then parallel on the central axis of the stand base (see figure on page 9).

Now you can remove the protective caps from the tube connectors so that you

can then fit the eyepieces. When doing this, please be particularly careful that you

do not touch the optical lenses with your fingers and that no dust enters the

apertures.

You should also never fit two eyepieces with different magnifications.

With regard to the use of transmitted light illumination you must make sure that

the frosted glass stand inlay is fitted in the centre of the stand base, so that the

transmitted light can be used correctly.

It is always best to fix the different stand inlays using the adjusting screw on the

front side of the stand base.

When using reflected light please make sure that the connection cable between the

holder and the objective is plugged in.

Additional optional attachments:

The eye cups supplied with the microscopes can be fitted to the eyepieces.

(see section 5.6)

9 OZL-45R-BA-e-1510

Assembled stereo zoom microscope

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere KERN Optics Mikroskop Handbücher

KERN Optics

KERN Optics OKN-1 Bedienungsanleitung

KERN Optics

KERN Optics OZM-98 Series Bedienungsanleitung

KERN Optics

KERN Optics OBE 1 Bedienungsanleitung

KERN Optics

KERN Optics OBN-13 Bedienungsanleitung

KERN Optics

KERN Optics OZL-47 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

KERN Optics

KERN Optics OZM 912UK Bedienungsanleitung

KERN Optics

KERN Optics OBN 159 Bedienungsanleitung

KERN Optics

KERN Optics OBE 121 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

KERN Optics

KERN Optics OCM 161 Bedienungsanleitung

KERN Optics

KERN Optics OBN-15 Bedienungsanleitung

KERN Optics

KERN Optics OBF-1 Bedienungsanleitung

KERN Optics

KERN Optics OBN132 Bedienungsanleitung

KERN Optics

KERN Optics OBS-1 Bedienungsanleitung

KERN Optics

KERN Optics OZL 46 Series Bedienungsanleitung

KERN Optics

KERN Optics OIV-2 Bedienungsanleitung

KERN Optics

KERN Optics OKM-1 Bedienungsanleitung

KERN Optics

KERN Optics OBD-1 Bedienungsanleitung

KERN Optics

KERN Optics OZM-9 Series Bedienungsanleitung

KERN Optics

KERN Optics OBT 101 Bedienungsanleitung

KERN Optics

KERN Optics OZO-5 Bedienungsanleitung

KERN Optics

KERN Optics OIV-6 Bedienungsanleitung

KERN Optics

KERN Optics OZL-9 Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung

Leica

Leica FL560 Bedienungsanleitung

AO Cycloptic Bedienungsanleitung