Keysight X series Installations- und Betriebshandbuch

Notice: This document contains references to Agilent.

Please note that Agilent’s Test and Measurement

business has become Keysight Technologies. For

more information, go to www.keysight.com.

Keysight X-Series Signal Analyzers

Option SF2

Security Features, Prohibit Saving Results

Installation Note

Notices

The information contained in this document is subject to change without notice.

Keysight Technologies makes no warranty of any kind with regard to this material, including but

not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Keysight Technologies shall not be liable for errors contained herein or for incidental or

consequential damages in connection with the furnishing, performance, or use of this material.

Manual Part Number

N9020-90234

Edition

Edition 1, April 2018

Supersedes: January 2015

Printed in USA/Malaysia

Published by:

Keysight Technologies, Inc.

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Installation Note N9020-90234 3

Option SF2, Security Features, Prohibit Saving Results

Introduction

This installation note explains how to install Option SF2 on an X-Series analyzer. Option SF2

provides changes to the Softkeys and SCPI eliminating the ability to Save or Recall user data. This

is at the request of security conscious customers who require no vulnerability in the instrument's UI

to save measurement results or user configuration to the instrument's disk drive. For consistency,

Recall is eliminated as well. Option SF2 controls access to these Softkeys and SCPI; with Option

SF2 the keys & SCPI are locked-out.

Also, the Windows page files are disabled, and this will cause the available memory space for the

power-on preloaded applications to decrease.

This option requires Windows 7 or Windows 10 operating system, and is not supported by Windows

XP.

The option is licensed for one instrument model number/serial number combination. The license

file that is downloaded from the web will only install on the designated instrument.

Products Affected: CXA N9000A

EXA N9010A

MXA N9020A

PXA N9030A

UXA N9040B

UXA N9041B

Serial Numbers: All

To Be Performed By: (X) Keysight Service Center

(X) Personnel Qualified by Keysight

(X ) Customer

Estimated Installation Time:

Estimated Adjustment and Verification Time:

1.0 Hours

0 Hours

4Installation Note N9020-90234

Option SF2, Security Features, Prohibit Saving Results

Contents

Tools Required

— Personal computer with internet access and USB port

— USB storage device with >2GB free memory

1. The signal analyzer being upgraded with this option must have software version A.14.00 or

newer.

To verify that the current version meets this requirement, press System, Show, System

and look for the “Instrument S/W Revision”.

The latest revision of the X-Series Signal Analyzers software may be downloaded from

http://www.keysight.com/find/xseries_software.

If a software update is required, perform the software update BEFORE following the procedure in

this document for redeeming and installing the option upgrade license key.

2. This option is licensed for one instrument model/serial number combination. The license key

will only install on the designated instrument.

3. Windows 7 or Windows 10 operating system is required.

Quantity Description Part Number

1 Installation Note This note

1 Option Upgrade Entitlement Certificate 5964-5178

Installation Note N9020-90234 5

Option SF2, Security Features, Prohibit Saving Results

Installation Procedure

1. Update the instrument software to A.14.00 or later. Upon reboot assure instrument is

functioning correctly and passes all auto alignments.

2. For Windows 7: Log out of the default user (instrument) by selecting Start, Log Off.

For Windows 10: Log out of the default user (instrument):

- Select the Start icon .

- Select the Change account settings icon .

- Select Sign out

3. At the login screen enter:

User name: administrator

Password: agilent4u

Keysight4u!

4. This step disables the paging files. Navigate to C:\\ Program Files\Agilent\Signal

Analysis\Infrastructure and run the SF2RegSetup.reg

A window such as the one shown below will appear. Click on Yes.

Another window will appear notifying you that the SF2RegSetup has been added to the

registry. Click OK.

The administrator password depends on the age of the instrument's disk drive. Early

instruments may contain new disk drives due to upgrades or repair. You may have spare disk

drives of varying vintages and these spare disk drives may require a different administrator

password than the disk drive currently installed in the instrument.

6Installation Note N9020-90234

Option SF2, Security Features, Prohibit Saving Results

5. On the Windows desktop, click the Configure Applications shortcut. When the window

appears click the Deselect All button. Click OK. This step required to assure there will be

minimal applications preloaded at power up.

6. Cycle instrument power by turning off the instrument. Since the changes were performed, it

may take a bit longer than normal for the instrument to power down.

Power up the instrument and let it boot completely.

Installation Note N9020-90234 7

Option SF2, Security Features, Prohibit Saving Results

License Installation Procedure over USB

1. Locate the Option Upgrade Entitlement Certificate (5964-5178) from the kit.

2. Redeem the Option Upgrade Entitlement Certificate by following the instructions on the

Certificate.

3. After redeeming your Option Upgrade Entitlement Certificate you will receive an email with an

attached License File.

4. Locate a USB storage device. Perform a virus scan on this device before use.

5. Save the License File to the root directory of the USB Storage Device.

6. Connect the USB Storage Device to the signal analyzer USB port. Windows will detect the new

hardware and may display the configuration menu shown in Figure 1. This menu may be

configured according to your preferences.

Figure 1 USB Storage Device Configuration Menu

7. The signal analyzer will automatically consume the License File. (This may take a few minutes)

When the License File is consumed the Keysight License Manager will display a “Successful

License Installation” message as shown in Figure 2.

Figure 2 Successful License Installation

8Installation Note N9020-90234

Option SF2, Security Features, Prohibit Saving Results

Alternate Installation Procedure

The License File can be manually installed over USB or LAN by placing the license file in the

following folder on the signal analyzer

C:\Program Files\Agilent\licensing

Verify the Installation and Instrument Software Version

1. Cycle power on the signal analyzer and wait until the analyzer boots to the measurement

application screen.

2. Press System, Show, System to display a list of installed options.

3. Verify that the installed option list contains N90xxX-SF2.

4. Verify that the “Instrument S/W Revision” meets the requirements outlined in the note on

page 4 of this document.

5. Press the front panel Save, or Quick Save key. An error message should appear in the message

bar at bottom screen that tells you the feature is not available for Option SF2.

Installation Note N9020-90234 9

Option SF2, Security Features, Prohibit Saving Results

Utilities, Adjustments, and Performance Verification Tests

Utilities Required

None

Adjustments Required

None

Performance Testing Required

None

For assistance, contact your nearest Keysight Technologies Sales and Service Office. To find your

local

Keysight office access the following URL, or if in the United States, call the following telephone

number:

http://www.keysight.com/find/assist

1-800-829-4444 (8 am - 8 pm ET, Monday - Friday)

This information is subject to change

without notice.

Edition 1, April 2018

N9020-90234

www.keysight.com

Andere Handbücher für x series

Inhaltsverzeichnis

Andere Keysight Messgerät Handbücher

Keysight

Keysight x series Betriebsanleitung

Keysight

Keysight N9923A Bedienungsanleitung

Keysight

Keysight U8903B Bedienungsanleitung

Keysight

Keysight N9322C Handbuch

Keysight

Keysight N8973B Bedienungsanleitung

Keysight

Keysight N9020B Installations- und Betriebshandbuch

Keysight

Keysight N9030B Installations- und Betriebshandbuch

Keysight

Keysight N5244/45AS Option H85 Handbuch

Keysight

Keysight E5081A ENA-X Series Benutzerhandbuch

Keysight

Keysight U1401B Handbuch

Keysight

Keysight E5063A Bedienungsanleitung

Keysight

Keysight 6811B Bedienungsanleitung

Keysight

Keysight N7020A Bedienungsanleitung

Keysight

Keysight 16801A Bedienungsanleitung

Keysight

Keysight M9202A Benutzerhandbuch

Keysight

Keysight N9320B Handbuch

Keysight

Keysight E5061B Bedienungsanleitung

Keysight

Keysight 8990B Bedienungsanleitung

Keysight

Keysight B2900A Bedienungsanleitung

Keysight

Keysight N9010B EXA Installations- und Betriebshandbuch

Keysight

Keysight B2980A Series Installationsanleitung

Keysight

Keysight N5227BU-420 Bedienungsanleitung

Keysight

Keysight PNA-X N5241A Bedienungsanleitung

Keysight

Keysight N9030B Installations- und Betriebshandbuch

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung

Keysight x series Installations- und Betriebshandbuch

Beliebte Messgerät Handbücher anderer Marken