Kohler Fairfax K-12185 Bedienungsanleitung

Installation Guide

Remote Kitchen Sink Faucets

Mproduct numbers are for Mexico (i.e. K-12345M)

Los números de productos seguidos de

Mcorresponden a México (Ej.

K-12345M)

Français, page“ Français-1”

Español, página“ Español-1”

K-12185, K-R12190 K-R12185

1036180-2-C

Thank You For Choosing Kohler Company

We appreciate your commitment to Kohler quality. Please take a few

minutes to review this manual before you start installation. If you

encounter any installation or performance problems, please don’t

hesitate to contact us. Our phone numbers and web site are listed on

the back cover. Thanks again for choosing Kohler Company.

Tools and Materials

Before You Begin

Observe all local plumbing and building codes.

Shut off the water supplies.

Carefully inspect waste and supply tubing for any sign of

damage and replace if necessary.

For new installations, assemble the faucet on the sink before

installing the sink.

Before installation, unpack the new faucet and inspect it for

damage. Return the faucet to the carton until you are ready to

install it.

Kohler Co. reserves the right to make revisions in the design of

faucets without notice, as speciﬁed in the Price Book.

Two 3/8" Male

Supply Connections

Adjustable

Wrench

Plumbers

Putty

Phillips

Screwdriver

1036180-2-C 2 Kohler Co.

1. Install the Handspray

Apply a bead of plumbers putty or other sealant to the underside

of the spray holder according to the manufacturer’s instructions.

Insert the spray holder through the sink hole.

Securely hand tighten the nut from under the sink.

Remove any excess putty or sealant.

2. Faucet Installation

Slide the escutcheon and gasket to the spout.

Partially thread two screws into the threaded ring until they

protrude slightly from the backside of the threaded ring.

Run the handspray hose down through the handspray holder.

Slide the threaded ring and washer on the handspray hose.

Run the handspray hose up through the spout mounting hole and

attach it to the handspray hose connector on the spout.

Position the spout in the desired mounting position.

Slide the metal washer onto the shank.

Thread the ring up the shank until it is about 1/4″(6 mm) away

from the underside of the sink. Ensure the screw holes face the

front and back of the faucet.

Tighten the screws.

Hose

Sink

Nut

Handspray

Spray

Holder

Apply

plumbers

putty.

Spout

Sink

Washer

Ring Screws

Gasket

Escutcheon Handspray

Hose

Connector

Spray Hose

Kohler Co. 3 1036180-2-C

3. Install the Remote Valve

NOTE: The remote valve must be located within 8″(20.3 cm) of the

spout.

Slide the escutcheon and gasket over the supply hoses and onto

the remote valve.

Position the remote valve in the desired location.

Assemble the bracket, washer, and nut to the stud from

underneath the sink.

Align the handle and securely tighten the nut.

Connect the inlet hose to the spout connection. Make sure the

O-ring (not shown) in the spout connection is in place.

Sink

Bracket

Washer

Nut

Gasket

Spout

Hose

Remote

Valve

Escutcheon Spout Connection

Stud

Spacer

1036180-2-C 4 Kohler Co.

4. Install the Soap Dispenser

Remove the nut from the escutcheon.

Apply plumbers putty or other sealant in the groove on the

underside of the escutcheon according to the manufacturer’s

instructions.

Position the escutcheon in the desired mounting hole.

From underneath the sink thread the nut onto the escutcheon.

Tighten the nut until the escutcheon is ﬁrmly held in place.

Thread the dispenser bottle onto the escutcheon from below.

Fill the dispenser bottle with soap from above the sink.

Insert the pump assembly into the escutcheon.

Escutcheon

Bottle

Nut Cap

Apply Plumbers

Putty Here.

Pump

Assembly

Kohler Co. 5 1036180-2-C

5. Install the Supplies

CAUTION: Risk of restricted waterﬂow and product damage.

Use extreme care when bending the supply hoses to avoid

kinking and twisting. Hoses must not be taut after installation.

NOTE: If the sink installation requires that you coil the supply hoses

to obtain a good connection, maintain an inside coil diameter of at

least 3″(7.6 cm).

Carefully position the hot and cold supplies so they will not

interfere with the other hoses.

Connect the supply hoses to the supply stops. Left is hot, right is

cold.

Tighten all connections.

6. Installation Checkout

Remove the aerator from the end of the spout by turning it

counterclockwise.

Turn on the main water supply.

Open the faucet handle to the ON position.

Flush hot then cold water through the faucet for about one

minute.

Push the faucet handle down to the OFF position.

Reattach the aerator by turning it clockwise.

3" (7.6 cm)

or Larger

Cold

Hot Aerator

1036180-2-C 6 Kohler Co.

7. Optional Temperature Limiting Adjustment

Remove the plug button, setscrew, handle, and bonnet.

Reposition the indexer to stop the valve stem at the desired

maximum temperature.

Place the handle onto the valve stem. Do not secure..

Turn the handle to full hot and check the water temperature.

Repeat the above procedures until the desired temperature is

reached.

Reinstall the bonnet and handle onto the faucet body. Secure with

the screw.

Reinstall the plug button.

Bonnet Handle

Indexer

Splines Valve Stem

Plug

Button

Screw

Kohler Co. 7 1036180-2-C

Guide d’installation

Robinets d’évier de cuisine à distance

Outils et matériels

Merci d’avoir choisi la compagnie Kohler

Nous apprécions votre engagement envers la qualité Kohler. Veuillez

prendre s’il vous plaît quelques minutes pour lire ce manuel avant de

commencer l’installation. Ne pas hésiter à nous contacter en cas de

problème d’installation ou de fonctionnement. Nos numéros de

téléphone et adresse internet sont au verso. Merci encore d’avoir choisi

la compagnie Kohler.

Avant de commencer

Respecter tous les codes de plomberie et de bâtiment locaux.

Couper les alimentations d’eau.

Vériﬁer avec soin si l’évacuation ou les tubes d’alimentation pour

déceler tout signe d’endommagement et remplacer si nécessaire.

Pour de nouvelles installations, installer le robinet sur l’évier

avant d’installer ce dernier.

Avant l’installation, déballer le nouveau robinet et l’examiner

pour en déceler tout dommage. Remettre le robinet dans son

emballage de protection jusqu’à être prêt à l’installation.

Clé à

molette

Mastic de

plomberie

Arrêt(s)

d'alimentation et

tuyauterie

Tournevis

cruciforme

Kohler Co. Français-1 1036179-2-C

Avant de commencer (cont.)

Kohler Co. se réserve le droit d’apporter toutes modiﬁcations au

design des robinets et ceci sans préavis, comme spéciﬁé dans le

catalogue des prix.

Kohler Co. Français-2 1036179-2-C

1. Installer le vaporisateur

Appliquer du mastic de plombier ou autre produit d’étanchéité

au dessous du support du vaporisateur selon les instructions du

fabricant.

Insérer le support du vaporisateur dans l’oriﬁce de l’évier.

Sécuriser à la main l’écrou d’en-dessous de l’évier.

Retirer tout excédent de mastic de plombier ou de joint

d’étanchéité.

2. Installation du robinet

Glisser l’applique et le joint sur le bec.

Visser partiellement deux vis dans la bague ﬁletée jusqu’à ce

qu’elles dépassent légèrement de l’arrière de celle-ci.

Passer le tuyau du vaporisateur à travers son support.

Glisser l’anneau ﬁleté et la rondelle sur le tuyau du vaporisateur.

Passer le tuyau du vaporisateur à travers l’oriﬁce du support du

bec et l’attacher au connecteur du tuyau du vaporisateur sur le

bec.

Positionner le bec à l’emplacement désiré.

Glisser la rondelle métallique sur le manche.

Tuyau

Évier

Écrou

Vaporisateur

Porte-

vaporisateur

Appliquer du

mastic de

plomberie.

Bec

Évier

Rondelle

Anneau Vis

Applique

Joint

d'étanchéité

Tuyau

vaporisateur

Tuyau de

connexion

vaporisateur

1036179-2-C Français-3 Kohler Co.

Andere Handbücher für Fairfax K-12185

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler 74053T-4E2 Bedienungsanleitung

Kohler

Kohler K-45210 Montageanleitung

Kohler

Kohler Sunstruck K-24009-GH Bedienungsanleitung

Kohler

Kohler K-7659 Bedienungsanleitung

Kohler

Kohler K-7304 Montageanleitung

Kohler

Kohler K-35025-DWG Bedienungsanleitung

Kohler

Kohler Cabriole K-T14640 Montageanleitung

Kohler

Kohler K-99255X-4CD Montageanleitung

Kohler

Kohler K-2313 Bedienungsanleitung

Kohler

Kohler K-2209 Bedienungsanleitung

Kohler

Kohler K-13960 Bedienungsanleitung

Kohler

Kohler Serif 5 BubbleMassage K-1337-G Bedienungsanleitung

Kohler

Kohler PURIST UPGRADE Bedienungsanleitung

Kohler

Kohler 27406-2MB Bedienungsanleitung

Kohler

Kohler HYDRO-TOWER 200 Series Bedienungsanleitung

Kohler

Kohler K-78172-BN Bedienungsanleitung

Kohler

Kohler Freshman K-4989 Bedienungsanleitung

Kohler

Kohler 1202901-5-B Montageanleitung

Kohler

Kohler TaskSink K-3319 Bedienungsanleitung

Kohler

Kohler K-7167 Montageanleitung

Kohler

Kohler K-10441 Bedienungsanleitung

Kohler

Kohler K-6356 Bedienungsanleitung

Kohler

Kohler Mira Sport Bedienungsanleitung

Kohler

Kohler C3-150 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung