Kohler K-45346T Bedienungsanleitung

, 2011

1) Unpack bath shell and skirt and check for any transit

damage prior to installation.

2) Position the bath shell in the desired location in the

bathroom.

3) Check that the plumbing can be connected to the

bath when in the desired location.

4) Reaching under the bath, slide the feet clips onto

the feet as they would be when the bath is clipped in.

Check that the clips are all oriented in the same

direction and then mark around the feet with a

marker pen.

INSTALLATION

INSTALLATION INSTRUCTIONS

FREE STANDING BATH

K-45346T

368 201419

-1-

Please read these instructions carefully to

familiarize yourself with the required tools, materials,

and installation sequences. Follow the sections that

pertain to your particular installation. This will help

you avoid costly mistakes. In addition to proper

installation, read all operating and safety instructions.

All information is based on the latest product

information available at the time of publication.

Kohler China Ltd. reserves the right to make

changes in product characteristics, packaging, or

availability at any time without notice.

These instructions contain important care, cleaning,

and warranty information-

Please provide adequate available space for the

bath unit in accordance with rough-in. Arrange the

location of drain in advance.

All installations must comply with council and local

authority by-laws. It is the responsibility of the installer

to ensure that the waste is made watertight by means

of silicone sealant or caulking compound.

Bath drain supplies should be arranged preliminarily

according to the selected bath.

please leave these

instructions for the consumer.

IMPORTANT:

NOTE: Bath can be installed after the wall is completed.

BEFORE YOU BEGIN

1175503-T01-A

-2-

a)a) Feet clips "clipped in"

b) Feet clips "unclipped"

~3mm

5) Make sure that there will be room to slide the bath

out of the feet clips and that the surrounding walls

will not interfere with the installation. Also check that

the feet clips are oriented in such a way that the

bath can be slid in and out in one direction.

6) Remove the bath from position and attach the feet

clips to the floor using appropriate fixings screw.

Make sure the clips are fixed in the positions

marked in step 4. Use 2 screws to fix the clip on

diagnal position.

7) Adjust the nuts on the adjust feet, the nut should be

2~3mm lower than the top of the clip.

8) Install the bath drain on the bath.

Note: a) All clips are oriented in

the same direction.

b) Apply silicon to the hole

on the ground, then insert

the anchor.

1175503-T01-A

-3-

b)b) Floating rim joint.

9) If the apron on your bath has a "fixed" joint, then fix

the apron to the bath using the screw provided.

a) Fixed rim joint and screws being inserted.

10)

5mm

605mm

10) For fixed rim baths place the bath and apron upside

down on a level surface. Adjust the feet to protrude

aproximately 5mm past the skirt. Ensure the feet

are level with the floor by placing a spirit level

across them.

For floating rim joint baths adjust the feet to give a

level bath and the distance from the feet to the top

of the bath should be 605mm.

For fixed rim baths and the floating rim joint baths,

the weight of the baths should be supported by the

feet.

5mm

11)

12)

13)

11) With the skirt attached to the bath, connect the

plumbing to the bath.

12) Place the apron and bath over the feet clips and

slide the bath into the feet clips to lock the unit to

the floor. If the bath does not fit tightly into the clips,

remove the bath and adjust the nuts so that it does.

13) Fill the bath with water and test for leaks.

K-45346T

1175503-T01-A

-4-

Mequiars 28 ( )

()

Cleaning and Care

Cleaning Acrylic Surfaces: Do not use abrasive

cleansers on any acrylic surfaces, as they will scratch

and dull the surface. Wipe out the bath after each use

to prevent a build-up of soap and scum.

If the acrylic surface becomes dull, an automotive type

rubbing compound may be used on the unit, followed

by an application of paste wax.

We recommend:

Rubbing compound mequiars mirror glaze 28 metal

polish (import product)

reen oil.

IMPORTANT CONSUMER INFORMATION

1175503-T01-A

Inhaltsverzeichnis

Andere Kohler Sanitärprodukte Handbücher

Kohler

Kohler K-T14412 Bedienungsanleitung

Kohler

Kohler K-1997 Montageanleitung

Kohler

Kohler BRAZN K-702242T Bedienungsanleitung

Kohler

Kohler K-2268 Bedienungsanleitung

Kohler

Kohler K-1002-H2 Montageanleitung

Kohler

Kohler K-205 Montageanleitung

Kohler

Kohler 21902T-4-3GC Bedienungsanleitung

Kohler

Kohler K-2209 Bedienungsanleitung

Kohler

Kohler Sterling 442007-U Bedienungsanleitung

Kohler

Kohler K-682 Montageanleitung

Kohler

Kohler K-T461 Bedienungsanleitung

Kohler

Kohler BEAM K-30939T Bedienungsanleitung

Kohler

Kohler 1083258 Handbuch

Kohler

Kohler K-6228 Montageanleitung

Kohler

Kohler Castia K-TS35917-4Y-2MB Bedienungsanleitung

Kohler

Kohler K-4108T Bedienungs- und Wartungsanleitung

Kohler

Kohler Kohler K-9245 Montageanleitung

Kohler

Kohler K-12286 Montageanleitung

Kohler

Kohler K-454 Montageanleitung

Kohler

Kohler K-705771 Montageanleitung

Kohler

Kohler K-99255X-4CD Montageanleitung

Kohler

Kohler K-8593 Montageanleitung

Kohler

Kohler K-5665 Montageanleitung

Kohler

Kohler Caxton K-2216 Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung

Sanela

Sanela SLVN 07 Bedienungsanleitung

Glacier bay

Glacier bay DORIND HD67478W-6001 Montageanleitung

Sterling Plumbing

Sterling Plumbing C741 Bedienungsanleitung