Kramer WP-210E Bedienungsanleitung

Kramer Electronics, Ltd.

USER MANUAL

Model:

WP-210E

XGA Line Driver

Contents

Introduction 1

Getting Started 1

Overview 1

Your WP-210E XGA Line Driver 2

4.1

Your WP-210E: Available in 3 Versions 3

4.2

Your WP-210E Front Panel 4

4.3

Your WP-210E Lower Side Panel 5

4.4

Your RGBHV Outputs 5

Using the WP-210E XGA Line Driver 6

5.1

Installing the WP-210E XGA Line Driver 6

5.2

Operating the WP-210E XGA Line Driver 7

Technical Specifications 9

Figures

Figure 1: Your WP-210E: Available in 3 Versions 3

Figure 2: WP-210E Front Panel 4

Figure 3: WP-210E Lower Side Panel 5

Figure 4: WP-210E RGBHV Outputs 5

Figure 5: Example of Conference Room WP-210E Installation 6

Figure 6: Connecting the WP-210E 8

Tables

Table 1: WP-210E Front Panel Features 4

Table 2: WP-210E Lower Side Panel 5

Table 3: Technical Specifications of the WP-210E XGA Line Driver 9

P/N: 2900 - 0010431 A1

ADDENDUM: WP-210,WP-210E,WP-210A,WP-210AE,WP-210AL,WP-220,

WP-220E,and WP-230.

This addendum clarifies the correct color of the V sync and H sync coax cables.

The color of the coax cables with all Kramer Wall Plates, including the

WP-210, WP-210E, WP-210A, WP-210AE, WP-210AL, WP-220,

WP-220E, WP-230 will be as follows:

 For V sync (vertical sync) – black

 For H sync (horizontal sync) – yellow

1 No longer yellow

2 No longer white

Introduction

1 Introduction

Welcome to Kramer Electronics (since 1981): a world of unique, creative and

affordable solutions to the infinite range of problems that confront the video,

audio and presentation professional on a daily basis. In recent years, we have

redesigned and upgraded most of our line, making the best even better! Our

350-plus different models now appear in 8 Groups

, which are clearly defined

by function.

Congratulations on purchasing your WP-210E XGA Line Driver active wall

plate

, which is ideal for graphics installations in board, conference and

training rooms, as well as long distance signal distribution. The package

includes the following items:

 WP-210E XGA Line Driver

 This user manual

2 Getting Started

We recommend that you:

 Unpack the equipment carefully and save the original box and packaging

materials for possible future shipment

 Review the contents of this user manual

 Use Kramer high performance high resolution cables

3 Overview

The Kramer WP-210E XGA Line Driver includes:

 An XGA input (up to UXGA resolution) on a standard HD-15 connector

 A local monitor XGA loop-through on an HD15F connector

 An amplified and equalized RGBHV output on 5 BNC connectors

1 GROUP 1: Distribution Amplifiers; GROUP 2: Video and Audio Switchers, Matrix Switchers and Controllers; GROUP 3:

Video, Audio, VGA/XGA Processors; GROUP 4: Interfaces and Sync Processors; GROUP 5: Twisted Pair Interfaces;

GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors

2 Each wall plate is supplied with the required M3x4 screws

3 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com/manuals.html

4 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com (click “Cables and Connectors”

in the Products section)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your WP-210E XGA Line Driver

In particular, the WP-210E XGA Line Driver has:

 Level

control

 Cable equalization control

 Switches for ID BIT control and loop termination

 Switches to select between analog / digital sync operation

 Video bandwidth of 420 MHz, that ensures transparent operation for all

resolutions

 A standard 12 Volt DC feed

Achieving the best performance means:

 Connecting only good quality connection cables, thus avoiding

interference, deterioration in signal quality due to poor matching, and elevated

noise levels (often associated with low quality cables)

 Avoiding interference from neighboring electrical appliances and

positioning your WP-210E away from moisture, excessive sunlight and dust

4 Your WP-210E XGA Line Driver

This section defines the WP-210E XGA Line Driver:

 Available in 3 versions (see section 4.1)

 Front panel (see section 4.2)

 Lower side panel (see section 4.3)

 RGBHV Outputs (see section 4.4)

1 VGA/UXGA output signal

Your WP-210E XGA Line Driver

4.1 Your WP-210E: Available in 3 Versions

The Kramer WP-210E XGA Line Driver is available in 3 versions—one for

Belgium, one for Germany, and one for the England (and the rest of Europe)—

as Figure 1 illustrates:

Figure 1: Your WP-210E: Available in 3 Versions

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Your WP-210E XGA Line Driver

4.2 Your WP-210E Front Panel

Figure 2 and Table 1 define the front panel of the WP-210E:

Figure 2: WP-210E Front Panel

Table 1: WP-210E Front Panel Features

# Feature Function

1 Holes (2) For fastening the wall plate in place

2 XGA INPUT HD15F Connector Connect to the VGA/XGA source

3 LEVEL Potentiometer Adjusts

the output signal level for the RGBHV outputs

4 EQ.

Potentiometer Adjusts

the cable compensation equalization level for the

RGBHV outputs

5 ID BIT Button Selects ID BIT when pushed in (when outputting a VGA signal

from a notebook to an external VGA monitor

)

6 TERM. Button Push in to terminate with 75, or release for looping

7 XGA LOOP HD15F Connector For VGA/XGA looping to increase output availability

8 ON LED Illuminates when receiving power

1 Degradation and VGA/XGA signal loss can result from using long cables (due to stray capacitance), sometimes leading to a

total loss of sharpness in high-resolution signals

2 Use a screwdriver to carefully rotate the Potentiometer, adjusting the appropriate level

3 When the ID BIT is ON, the notebook will output to an external VGA monitor

Your WP-210E XGA Line Driver

4.3 Your WP-210E Lower Side Panel

Figure 3 and Table 2 define the lower side panel of the WP-210E:

Table 2: WP-210E Lower Side Panel

# Feature Function

1 H (Horizontal)

Sync Switch

2 V (Vertical)

Sync Switch

Set both switches to TTL for

a digital sync source (for

example, a graphics card

from a PC or laptop). Set

both switches to Analog if

the source is analog based,

for example, an RGBHV

source with coaxial cable

for sync, such as a camera

with analog H and V syncs

3 +12V PIN Connect (+) to the connector

for powering the unit

4 GND PIN Connect (-) to the Ground

Figure 3: WP-210E Lower Side Panel

4.4 Your RGBHV Outputs

Figure 4 defines the 5 RGBHV BNC output connectors

of the WP-210E

which connect to the pre-installed wiring in the wall box opening that

connects to the XGA acceptor:

Figure 4: WP-210E RGBHV Outputs

1 The WP-210E could be used for component HDTV by connecting YPbPr in place of GBR, and not connecting H and V

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Using the WP-210E XGA Line Driver

5 Using the WP-210E XGA Line Driver

You can use your WP-210E XGA Line Driver, for example, in a conference

room, as the example in Figure 5 illustrates:

Figure 5: Example of Conference Room WP-210E Installation

For details of how to:

 Install your WP-210E XGA Line Driver, see section 5.1

 Operate your WP-210E XGA Line Driver, see section 5.2

5.1 Installing the WP-210E XGA Line Driver

To install your WP-210E XGA Line Driver:

1. Connect the 5 BNC output connectors to the pre-installed wiring in the wall

box opening that connects to the XGA acceptor (for example, a projector).

2. Set both the Hs and Vs switches.

3. Connect your 12V DC power supply to the POWER SUPPLY pins

taking care that polarity is correct.

4. Insert the WP-210E directly into the wall box opening, and then mount

the front panel securely using the screws.

1 Connect the wire labeled “+” to the +12V pin, and the wire labeled “–” to the GND pin

Using the WP-210E XGA Line Driver

5.2 Operating the WP-210E XGA Line Driver

To operate your WP-210E XGA Line Driver:

1. Connect your XGA source (for example, a laptop’s graphics card) to the

XGA Input HD15F connector.

2. Connect the HD15F Loop connector to a local monitor, if required

3. Push in the ID Bit button to set to ON.

4. Adjust

the output signal level and/or cable compensation equalization

level, if required.

1 Push in the TERM switch if the loop output is used, otherwise make sure that the TERM switch is released

2 Use a screwdriver to carefully rotate the Potentiometer, adjusting the appropriate level

Inhaltsverzeichnis

Andere Kramer Kabel und Steckverbinder Handbücher

Kramer

Kramer WP-211DS Bedienungsanleitung

Kramer

Kramer SV-301 Bedienungsanleitung

Kramer

Kramer WP-220E Bedienungsanleitung

Kramer

Kramer FODPM Bedienungsanleitung

Kramer

Kramer UTBUS-1XL Bedienungsanleitung

Kramer

Kramer 612T Bedienungsanleitung

Kramer

Kramer 676T Bedienungsanleitung

Kramer

Kramer UTBUS-2XL Bedienungsanleitung

Kramer

Kramer TBUS-4 Bedienungsanleitung

Kramer

Kramer CLS-AOCH/60 Series Bedienungsanleitung

Kramer

Kramer CLS-AOCH/xl Bedienungsanleitung

Kramer

Kramer T6F-09 Bedienungsanleitung

Kramer

Kramer KRT-4-LAN Bedienungsanleitung

Kramer

Kramer TBUS-6 Bedienungsanleitung

Kramer

Kramer HDBT Bedienungsanleitung

Kramer

Kramer KRT-3 Bedienungsanleitung

Kramer

Kramer C-FODM/FODM-33 Bedienungsanleitung

Kramer

Kramer WP-220 Bedienungsanleitung

Kramer

Kramer CRS-AOCH/CLR/60 Service-Handbuch

Kramer

Kramer MODULAR TBUS-1Axl Bedienungsanleitung

Kramer

Kramer RTBUS-27xl Bedienungsanleitung

Kramer

Kramer LPE Installationshandbuch

Kramer

Kramer RTBUS-21 Bedienungsanleitung

Kramer

Kramer TBUS-100XL Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung