Kramer VP-16x18AK Bedienungsanleitung

Kramer Electronics, Ltd.

USER MANUAL

Model:

VP-16x18AK

16 x 18 PC UXGA/Audio Router

Contents

1Introduction 1

2Getting Started 1

2.1 Recycling Kramer Products 1

2.2 Quick Start 2

3Overview 4

3.1 Recommendations for Best Performance 5

3.2 Shielded Twisted Pair and Unshielded Twisted Pair 5

4Defining the VP-16x18AK 16 x 18 PC UXGA/Audio Router 6

4.1 Using the IR Transmitter 10

5Installing the VP-16x18AK in a Rack 11

6Connecting and Configuring the VP-16x18AK 12

6.1 Connecting the VP-16x18AK 12

6.2 Connecting the Audio Outputs to Balanced/Unbalanced Acceptors 13

6.3 Connecting to the VP-16x18AK via RS-232 14

6.4 Connecting to the VP-16x18AK via RS-485 14

6.5 Connecting to the VP-16x18AK via the Ethernet Port 15

6.5.1 Connecting Directly to the Ethernet Port 15

6.5.2 Connecting via a Network Hub, Switch, or Router 17

6.5.3 Configuring the Ethernet Port on the VP-16x18AK Using K-Upload 17

6.6 Setting the RS-485 Termination and Machine Number DIP-switches 17

7Operating the VP-16x18AK Locally via the Front Panel Buttons 19

7.1 The Status Display 19

7.2 Switching Inputs to Outputs 19

7.3 The At Once and Confirm Modes 20

7.3.1 Toggling between At Once and Confirm Modes 20

7.3.2 Confirming a Switching Action 20

7.4 Setting the Audio Gain for Inputs and Outputs 21

7.5Audio Output Bass and Treble Level Setting 21

7.6 Setting the Audio-Follow-Video or Breakaway Option 22

7.6.1 Setting the Audio-Follow-Video Option 22

7.6.2 Setting the Breakaway Option 22

7.7 Storing and Recalling Setup Configurations 22

7.7.1 Storing a Setup Configuration 23

7.7.2 Recalling a Setup Configuration 23

7.8 Locking and Unlocking the Front Panel Buttons 23

7.9 Reading and Writing the EDID 23

8Operating the VP-16x18AK Remotely 24

8.1 Operating the VP-16x18AK via RS-232 24

9Operating the VP-16x18AK Remotely Using a Web Browser 26

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Contents

9.1 Connecting to the VP-16x18AK via your Browser 26

9.2 The Main Switching Matrix Page 28

9.2.1 Switching an Input to an Output 29

9.2.2 Setting the AFV Mode 29

9.2.3 Operating in the Offline Mode 30

9.2.4 Storing and Recalling Setups 31

9.2.5 Locking the Front Panel Buttons 33

9.3 Audio Input Gain Control Page 33

9.4 The Configuration Page 34

10 Firmware Upgrade Using K-Upload 35

11 Technical Specifications 36

12 Default Communication Parameters 37

13 Factory Default EDID 37

14 Table of ASCII Codes for Serial Communication (Protocol 3000) 39

15 Table of Hex Codes for Serial Communication (Protocol 2000) 40

16 Kramer Protocol 42

16.1 Switching Protocols 42

16.1.1 Switching Protocols via the Front Panel Buttons 42

16.1.2 Switching Protocols via Protocol Commands 42

16.2 Kramer Protocol 3000 42

16.2.1 Protocol 3000 Syntax 43

16.2.2 Command Parts Details 43

16.3 Kramer Protocol 2000 50

Figures

Figure 1: VP-16x18AK 16 x 18 PC UXGA/Audio Router Front Panel 6

Figure 2: VP-16x18AK 16 x 18 PC UXGA/Audio Router Rear Panel 8

Figure 3: Connecting the VP-16x18AK 16 x 18 PC UXGA/Audio Router 13

Figure 4: Connecting to a Balanced Acceptor 13

Figure 5: Connecting to an Unbalanced Acceptor 14

Figure 6: Local Area Connection Properties Window 16

Figure 7: Internet Protocol (TCP/IP) Properties Window 16

Figure 8: VP-16x18AK DIP-switches 17

Figure 9: Control Configuration via RS-232 25

Figure 10: Java Test Page Success Message 26

Figure 11: Entering the IP Address in the Address Bar 26

Figure 12: The Loading Page 27

Figure 13: First Time Security Warning 27

Figure 14: Main Switching Matrix Page 28

Figure 15: Selecting a Switching Point on the Matrix 29

Figure 16: Switching an Input to an Output 29

Figure 17: AFV Mode Warning 30

Figure 18: AFV Mode Audio Channels Switched 30

Contents

iii

Figure 19: Switching Audio in the Offline Mode 31

Figure 20: Exiting Offline Warning 31

Figure 21: Selecting Preset 07 32

Figure 22: Selecting Preset 03 32

Figure 23: Recalling a Preset in Offline Mode 33

Figure 24: Audio Gain Control Page 33

Figure 25: Selecting Audio Input Gain for Channel 2 34

Figure 26: Configuration Page 34

Tables

Table 1: VP-16x18AK 16 x 18 PC UXGA/Audio Router Front Panel Features 6

Table 2: VP-16x18AK 16 x 18 PC UXGA/Audio Router Rear Panel Features 9

Table 3: DIP-switch Settings 17

Table 4: Machine Number DIP-switch Settings 18

Table 5: Technical Specifications of the VP-16x18AK 36

Table 6: Communication Parameters 37

Table 7: VP-16x18AK Video Signal Codes for Protocol 3000 39

Table 8: VP-16x18AK Audio Signal Codes for Protocol 3000 39

Table 9: VP-16x18AK Audio Input Gain Codes 39

Table 10: VP-16x18AK Audio Output Gain Codes 40

Table 11: VP-16x18AK Hex Codes for Switching Video Channels via RS-232/RS-485 40

Table 12: VP-16x18AK Hex Codes for Switching Audio Channels via RS-232/RS-485 40

Table 13: VP-16x18AK Hex Codes for Increasing/Decreasing the Audio Input Gain 40

Table 14: VP-16x18AK Hex Codes for Setting the Audio Input Gain 41

Table 15: VP-16x18AK Hex Codes for Increasing/Decreasing the Output Gain 41

Table 16: VP-16x18AK Hex Codes for Setting the Audio Output Gain 41

Table 17: Instruction Codes for Protocol 3000 44

Table 18: Protocol Definitions 50

Table 19: Instruction Codes for Protocol 2000 50

Introduction

1 Introduction

Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been

providing a world of unique, creative, and affordable solutions to the vast

range of problems that confront video, audio, presentation, and broadcasting

professionals on a daily basis. In recent years, we have redesigned and

upgraded most of our line, making the best even better! Our 1,000-plus

different models now appear in 11 groups1

Congratulations on purchasing your VP-16x18AK, 16 x 18 PC

UXGA/Audio Router which is ideal for the following typical applications:

that are clearly defined by

function.

•Professional display systems requiring a true 16x18 computer

graphics and audio matrix operation

•Multimedia and presentation source and acceptor selection

The package includes the following items:

•VP-16x18AK, 16 x 18 PC UXGA/Audio Router

•Kramer RC-IR3Infrared Remote Control transmitter (including the

required battery and a separate user manual2

•Power cord )

3 2

, rack “ears” and this user manual

2 Getting Started

We recommend that you:

•Unpack the equipment carefully and save the original box and

packaging materials for possible future shipment

•Review the contents of this user manual

•Use Kramer high-performance high-resolution cables4

•Use only the power cord that is supplied with this machine

2.1 Recycling Kramer Products

The Waste Electrical and Electronic Equipment (WEEE) Directive

2002/96/EC aims to reduce the amount of WEEE sent for disposal to

landfill or incineration by requiring it to be collected and recycled. To

comply with the WEEE Directive, Kramer Electronics has made

1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers; GROUP 3: Control Systems; GROUP 4:

Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:

Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories

and Rack Adapters; GROUP 11: Sierra Products

2 Available from http://www kramerelectronics com

3 We recommend that you use only the power cord that is supplied with this machine

4 The complete list of Kramer cables is available from http://www kramerelectronics com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Getting Started

arrangements with the European Advanced Recycling Network (EARN)

and will cover any costs of treatment, recycling and recovery of waste

Kramer Electronics branded equipment on arrival at the EARN facility. For

details of Kramer’s recycling arrangements in your particular country go to

our recycling pages at

http://www.kramerelectronics.com/support/recycling/.

2.2 Quick Start

This quick start chart summarizes the basic setup and operation steps.

Getting Started

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Overview

3 Overview

The VP-16x18AK is a high performance, 16x18 computer graphics video

matrix router for high resolution video and stereo audio signals. The

VP-16x18AK is HDTV compatible and lets you simultaneously route any

or all of the 16 inputs to any or all of the 18 outputs.

In particular, the VP-16x18AK,16 x 18 PC UXGA/Audio Router features:

•Kramer’s innovative integrated sync processing; Kr-isp®technology

provides a sharp, stable image by restoring the signal waveform even

when the sync level is too low

•A video bandwidth of over 300MHz that ensures transparent

performance even for the most critical applications

•12 preset memory locations for quick access to common routing

configurations and audio gain status for each output

•Automatic detection of inputs with live connections (the respective

input button lights green)

•A delayed switching mode (ranging from 0 to 3.5sec1

•DC-coupled video inputs and outputs

) for clean

transitions when switching between non-genlocked sources

•Audio-follow-video and breakaway options

•16 VGA (up to UXGA) video inputs on 15-pin HD connectors

•16 unbalanced, stereo audio inputs on 3.5mm mini jacks

•16 VGA (up to UXGA) video outputs on 15-pin HD connectors

•16 balanced stereo audio outputs on 5-pin, removable terminal block

connectors

•Two Twisted Pair outputs on RJ-45 connectors

•Audio level control buttons for adjusting the volume of each input

and output

•Bass and treble control for each output

•The ability to place multiple switching actions in a queue and then to

activate them simultaneously with a one touch button

•The ability to lock the front panel buttons to prevent tampering with

settings

•Support for DDC (Display Data Channel) communication between

input 1 and output 1 high-density 15-pin HD connectors on pins 12

and 15

•Default EDID values programmed on each input

•Customizable bass and treble for each output

1 In ½ second increments

Overview

You can operate the VP-16x18AK using the front panel buttons, or

remotely via:

•RS-485, RS-232 serial or Ethernet TCP/UDP commands (using

Kramer 2000 and 3000 protocols) transmitted by a touch screen

system, PC or other serial/Ethernet controller

•The Kramer Infrared Remote Control transmitter or Infrared remote

extension cable transmitter (optional)

•Your Web browser using Ethernet communication over a LAN

The VP-16x18AK is dependable, rugged and fits into three vertical spaces

(3U) of a standard 19” professional rack.

3.1 Recommendations for Best Performance

To achieve the best performance:

•Use only high quality connection cables1

•Do not secure the cables in tight bundles or roll the slack into tight

coils

to avoid interference,

deterioration in signal quality due to poor matching, and elevated

noise levels (often associated with low quality cables)

•Avoid interference from neighboring electrical appliances that may

adversely influence signal quality

•Position your Kramer VP-16x18AK away from moisture, excessive

sunlight and dust

3.2 Shielded Twisted Pair and Unshielded Twisted Pair

We recommend that you use Shielded Twisted Pair (STP) cable, and stress

that the compliance to electromagnetic interference was tested using STP

cable. There are different levels of STP cable available, and we advise you

to use the best quality STP cable that you can afford. Our non-skew-free

cable, Kramer BC-STP is intended for analog signals where skewing is not

an issue.

In cases where there is skewing, our Unshielded Twisted Pair (UTP) skew-

free cable, Kramer BC-XTP, may be advantageous, and UTP cable might

also be preferable for long range applications. In any event when using UTP

cable, it is advisable to ensure that the cable is installed far away from

electric cables, motors and so on, which are prone to create electrical

interference.

1 Available from Kramer Electronics and listed on our Web site at http://www kramerelectronics com

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Defining the VP-16x18AK 16 x 18 PC UXGA/Audio Router

4 Defining the VP-16x18AK 16 x 18 PC UXGA/Audio Router

Figure 1and Table 1define the front panel of the VP-16x18AK 16 x 18 PC UXGA/Audio Router.

Figure 1: VP-16x18AK 16 x 18 PC UXGA/Audio Router Front Panel

Table 1: VP-16x18AK 16 x 18 PC UXGA/Audio Router Front Panel Features

# Feature Function

1 SELECTOR IN Buttons Press to select an input (from 1 to 16) following the selec ion of an output (see Section 7.2).

When an input signal is detected, the corresponding input button lights

2 SELECTOR OUT Buttons Press to select an output (from 1 to 18) followed by an input selection (see Section 7 2)

Andere Handbücher für VP-16x18AK

Inhaltsverzeichnis

Andere Kramer Matrix-Umschalter Handbücher

Kramer

Kramer VS-1616DN-MD Bedienungsanleitung

Kramer

Kramer VP-4x8 Bedienungsanleitung

Kramer

Kramer VS-88HDxl Bedienungsanleitung

Kramer

Kramer VS-24x1 Bedienungsanleitung

Kramer

Kramer VSM-4x4X Bedienungsanleitung

Kramer

Kramer VP-8x8A Bedienungsanleitung

Kramer

Kramer VS-88DT Bedienungsanleitung

Kramer

Kramer VS-48HDCPxI Bedienungsanleitung

Kramer

Kramer VSM-4x4A Bedienungsanleitung

Kramer

Kramer VS-1616V Bedienungsanleitung

Kramer

Kramer VS-2616 Bedienungsanleitung

Kramer

Kramer VS-84HDCPxl Bedienungsanleitung

Kramer

Kramer VS-88SDI Bedienungsanleitung

Kramer

Kramer VS-84HDCPxl Bedienungsanleitung

Kramer

Kramer Sierra Video 3216V5S Bedienungsanleitung

Kramer

Kramer VS-62DT Bedienungsanleitung

Kramer

Kramer VS-5x5 Bedienungsanleitung

Kramer

Kramer 20-04400030 Bedienungsanleitung

Kramer

Kramer Sierra Video 1608V3 Bedienungsanleitung

Kramer

Kramer VS-44HDCP Bedienungsanleitung

Kramer

Kramer VS-1616D-MD Bedienungsanleitung

Kramer

Kramer VS-5x5 Bedienungsanleitung

Kramer

Kramer VP-885 Bedienungsanleitung

Kramer

Kramer XL 1208V Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte

Lindy

Lindy 38042 Bedienungsanleitung

Extron electronics

Extron electronics MTPX Plus Series Bedienungsanleitung

Key Digital

Key Digital Champion KD-16x16CS Bedienungsanleitung

Shinybow USA

Shinybow USA SB-8811 Bedienungsanleitung

Optimus

Optimus Compact Bedienungsanleitung