La Crosse Technology 308-1451v2 Bedienungsanleitung

La Crosse Technology, Ltd. Page 1

308-1451V2 FAQS

The links below will work in most PDF viewers and link to the topic area by clicking the link. We

recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader

CONTENTS

308-1451v2 FAQS ..................................................................................................................... 1

Batteries ................................................................................................................................... 2

Forecast Station Factory Restart ............................................................................................ 2

Outdoor Temperature Transmitter.......................................................................................... 3

Compatible Outdoor Transmitters........................................................................................... 3

Quick Connect........................................................................................................................ 3

Dashes shown for Outdoor Temperature................................................................................ 3

Power Requirements .............................................................................................................. 3

Outdoor Temperature changes constantly.............................................................................. 3

Inaccurate Outdoor Temperature reading............................................................................... 3

Intermittent Outdoor Temperature/Humidity............................................................................ 4

Outdoor Temperature is stuck or HH.H or LL.L....................................................................... 4

Outdoor transmitter fell and does not work. ............................................................................ 4

Outdoor transmitter drains batteries quickly............................................................................ 4

Temperature Trend Arrows..................................................................................................... 5

MIN/MAX Temperature readings ............................................................................................ 5

Frost Alarm............................................................................................................................. 5

Temperature Alarms............................................................................................................... 5

Channels ................................................................................................................................ 6

Multiple Outdoor Transmitters ................................................................................................ 6

Mounting/Positioning Outdoor Transmitter.............................................................................. 7

Position forecast station ......................................................................................................... 7

Distance/Resistance/Interference ........................................................................................... 7

Forecast Station....................................................................................................................... 8

How tall are the time numbers? .............................................................................................. 8

Supported Time Zones ........................................................................................................... 8

12-Hour or 24-Hour Time Format ........................................................................................... 8

Power Requirements .............................................................................................................. 8

Indoor Comfort Statement ...................................................................................................... 8

Manually Set Time/Date: Program Menu ................................................................................ 8

Sunrise/Sunset Times ............................................................................................................ 9

No WWVB Tower Icon............................................................................................................ 9

Dashes, HH.H, LL.L or stuck Indoor Temperature/Humidity ..................................................10

La Crosse Technology, Ltd. Page 2

Inaccurate Indoor Temperature reading.................................................................................10

Time is off by hours ...............................................................................................................10

Set Time Alarm......................................................................................................................10

Activate/Deactivate Time Alarm.............................................................................................10

Snooze Alarm........................................................................................................................10

Forecast Icons Inaccurate .....................................................................................................11

Forecast Arrows ....................................................................................................................11

Clothing Index .......................................................................................................................11

Absolute Barometric Pressure ...............................................................................................11

Absolute Pressure Unit of Measure .......................................................................................11

Pressure History....................................................................................................................11

Moon Phase ..........................................................................................................................12

Tides .....................................................................................................................................12

Weather Station is dim ..........................................................................................................12

Weather Station has distorted or frozen display.....................................................................12

Weather Station is blank: No letters, numbers or dashed lines ..............................................13

Weather Station drains batteries quickly................................................................................13

Weather Station has missing segments.................................................................................13

Batteries

Explanation: Many problems are resolved with fresh batteries of the appropriate voltage. Many items

sent in under warranty work when tested with fresh batteries. Batteries manufactured this year will have

an expiration date 10 years (or more) in the future. Battery technology has improved and batteries will

maintain voltage longer in storage. However, the environment the batteries reside in for the 10 years can

deplete the power.

We suggest name brand Alkaline batteries for indoor displays.

Use Alkaline or Lithium batteries in the outdoor sensors.

A minimum voltage of 1.48V for each battery is necessary for proper performance.

Use batteries dated at least six years in advance of the current year. Batteries dated earlier than six

years from now may still work, but may be unstable in performance.

Good name brand batteries make less noise, which reduces the chance of RF (radio frequency)

interference from the battery compartment.

Forecast Station Factory Restart

Explanation: The factory restart returns the weather station and outdoor sensor to an “out-of-the-box”

state and often resolves an issue.

Factory Restart:

1. Remove all power from outdoor sensor and weather station.

2. Press one of the buttons on the weather station at least 20 times to clear all memory.

3. Verify that the weather station is blank before proceeding (some lines are painted on and will not

disappear).

4. Leave batteries out of both units for 15 minutes (very important).

5. Insert fresh Alkaline batteries into the weather station.

6. Insert fresh batteries into the outdoor sensor.

La Crosse Technology, Ltd. Page 3

7. Press the TX button on the outdoor sensor to transmit RF signal.

8. Keep the outdoor sensor 5-10 feet from the weather station.

9. When RF connection is established, the temperature will appear on the station. Allow the outdoor

sensor and weather station to sit together for 15 minutes to establish a strong connection.

10. Do not press buttons for 15 minutes.

For optimum 433MHz transmission, place the outdoor sensor no more than 330 feet (100 meters,

open air) from the weather station.

See the section on mounting and distance/resistance/interference for details on mounting the outdoor

sensor.

Outdoor Temperature Transmitter

Compatible Outdoor Transmitters

A TX142THv3 outdoor transmitter comes packaged with this forecast station.

The TX142TH (all versions), TX14TH, TX14TH-LCD-G and TX14TH-LCD-B (433MHz) transmitters

are compatible with this forecast station.

Quick Connect

Explanation: The quick connect is used for a weather station and outdoor sensor that have been working

but lost connection due to interference or low batteries. This is not a thorough factory reset.

1. Bring the outdoor sensor and weather station together inside and place the units 5-10 feet apart with

nothing between them.

2. Hold the CH button on the weather station. The outdoor temperature area will flash.

3. Remove battery cover from the outdoor sensor and press and release the TX button to send the

signal.

4. Wait for 2 minutes for the outdoor temperature to appear on the weather station.

Factory Restart: If the above procedure does not work, please try the factory reset.

Dashes shown for Outdoor Temperature

Explanation: Dashes mean the connection is lost between the weather station and the outdoor sensor.

Batteries often resolve the connection.

Distance/Resistance can cause loss of connection between the outdoor sensor and the weather

station.

Turn the weather station 90 degrees towards the outdoor sensor to provide better reception. This

allows more antenna surface to face the outdoor sensor signal.

Try the quick connect or factory restart.

Power Requirements

2-AA batteries power the outdoor transmitter.

We recommend alkaline batteries for the transmitter.

You may choose to use lithium batteries for temperatures below -20°F/-28.8°C.

Outdoor Temperature changes constantly

You may have an additional compatible outdoor transmitter within range.

Occasionally a neighbor will have a compatible outdoor transmitter that is within range.

Check Channels:Confirm that the channel selected on the outdoor transmitter matches the channel

shown on the forecast station.

Inaccurate Outdoor Temperature reading

La Crosse Technology, Ltd. Page 4

Explanation: High outdoor temperature readings are generally a location issue. Low outdoor temperature

readings are power related or a sensors going bad.

The outdoor sensor reads the environment where it is mounted. When mounted inside the home, it

will read inside temperature/humidity.

When the outdoor sensor reads high during the day, but not at night, it is a positioning problem.

Look for heat sources such as sunlight, door or window frames or reflected heat.

Side-by-side test: Bring the outdoor sensor in the house and place it next to the weather station for 2

hours.

Compare indoor and outdoor temperature. The temperatures should be within 4 degrees to be within

tolerance.

If the outdoor sensor reads correctly when next to the weather station, try a different location outside.

Intermittent Outdoor Temperature/Humidity

Explanation: Intermittent problems are the hardest to resolve. RF (radio frequency) communication may

come and go occasionally. This can be normal in some environments (e.g. moister climates). If outdoor

sensor signal is lost, please wait 2-4 hours for the signal to reconnect on its own.

Check Channels:Confirm that the channel selected on the outdoor transmitter matches the channel

shown on the forecast station.

Move the outdoor transmitter to a closer location.

Freezer test: Confirm the forecast station is reading the correct outdoor transmitter. Place the

transmitter in the freezer for an hour and watch the temperature drop on the forecast station.

Indoor distance test: Please complete the Restart with transmitter and forecast station5-10 feet

apart and inside to establish a strong connection.

If there is a reading in the outdoor temperature area after 15 minutes, move the transmitter to another

room with one wall between the transmitter and the forecast station. Observe to see if the

temperature remains on consistently for 1 hour.

If the temperature remains on while in the house, then it is likely a distance/resistance issue. Move

the transmitter to different locations outside to find a location where the temperature reading will hold.

Distance/Resistance can cause loss of transmitter signal.

Check Batteries.

Outdoor Temperature is stuck or HH.H or LL.L

Explanation: These symbols are error messages indication the outdoor sensor is outside of its readable

range.

Check Batteries.Overpowered or underpowered batteries can cause this reading.

Replace outdoor sensor.

Note: The last outdoor reading may remain (not change) for several hours when connection is lost. The

outdoor temperature reading will flash when the connection is first lost or intermittent.

Outdoor transmitter fell and does not work.

Explanation: If there is no physical damage to the outdoor sensor, the fall may not have caused internal

damage. A fall can shock the outdoor sensor or the batteries in the outdoor sensor. Batteries that have

fallen on a hard surface may be damaged and unable to function properly.

Complete a Restart with fresh batteries.

Use Batteries dated at least six years in advance of the current year. Batteries dated earlier than six

years from now may still work, but may be unstable in performance.

Note: An outdoor sensor that has fallen into puddle, snow, or other standing water, will likely have water

damage and needs to be replaced. Outdoor sensors are water resistant, not waterproof.

Outdoor transmitter drains batteries quickly

La Crosse Technology, Ltd. Page 5

Test a new set of alkaline batteries. Write down the date of installation and the voltage of the

batteries.

When the batteries fail, please note the date and voltage again.

Check the distance and resistance between the outdoor sensor and weather station. Outdoor sensors

at the end of the range may work while batteries are fresh but not after they drain a bit.

Check for leaking batteries, which may damage the outdoor sensor.

Battery life is over 24 months when using reputable battery brands for both Alkaline and Lithium

batteries.

Replacement Outdoor Sensors

Visit your local Retailer or La Crosse Technology® Store http://store.lacrossetechnology.com/ (Please

copy and paste this link to your browser address bar).

Note: Be sure to order the correct model and frequency to avoid receiving the incorrect item.

Call La Crosse Technology® Store at 608-785-7939 or e-mail from our website if you are unsure

about the correct item to order. Each item carries the original new product warranty and includes

access to La Crosse Technology technical support.

Temperature Trend Arrows

The indoor and outdoor temperature trend indicators will update every 30 minutes or less. These trends

represent temperature changes over the past three hours.

UP ARROW: Temperature rose more than 2°F/1°C in the past three hours

RIGHT ARROW: Temperature has not changed more than 2°F/1°C in the past three hours

DOWN ARROW: Temperature fell more than 2°F/1°C in the past three hours

MIN/MAX Temperature readings

Explanation: The weather station shows the daily minimum and maximum temperatures each day

starting at midnight (12:00 AM). The weather station automatically resets the MIN/MAX temperatures at

midnight (12:00 AM).

You can manually reset the MIN/MAX data at any time.

View MIN/MAX data: Press and release the MAX/MIN button to view the Maximum, Minimum, then

Current Indoor and Outdoor Temperatures.

Multiple Transmitters: Press and release the CH button to select the desired outdoor channel to

view the Minimum and Maximum Outdoor Temperatures. Press and release the MAX/MIN button to

view the Maximum, Minimum then Current Temperatures for that channel.

Reset all MIN/MAX data: Hold the MAX/MIN button for 5 seconds and the Indoor and all Outdoor

Minimum and Maximum Temperatures may be reset manually to current temperatures.

Frost Alarm

FROST ALARM: The Frost Alarm will sound when the outdoor temperature drops to 34°F (1.1°C).

ACTIVATE Press and release the TEMP ALERT button to activate the Frost Alarm on all channels

(when multiple transmitters in use). The Frost Alarm icon will appear in the outdoor temperature

area when active.

DEACTIVATE Press and release the TEMP ALERT button until the Frost Alarm icon no longer

shows.

Temperature Alarms

Outdoor Temperature Alarms:A high and low outdoor temperature alarm may be set on the forecast

station.

La Crosse Technology, Ltd. Page 6

Note: When multiple transmitters are in use on different channels, a high and/or low temperature may be

set for each channel.

Set Temperature Alarm Channel 1:

1. Press and release the CH button to select channel 1 (when multiple transmitters in use).

2. Hold the TEMP ALERT button until the High Temp Alert icon appears and the temperature will

flash. Use the + or -button to select your High Temp alarm value. Press and release the SET button

to move to the Low Temp alarm.

3. The Low Temp Alert icon will appear and the temperature will flash. Use the + or -button to

select your Low Temp alarm value. Press and release the SET button to confirm and exit to current

temperature.

4. The Temp Alert icon will show in the outdoor temperature area when a temperature alarm is

active. When the temperature alarm sounds, the Temp Alert icon and the temperature value will flash.

Press any button to silence the alarm temporarily.

Set Temperature Alarm Channels 2 or 3: Use the CH button to select the channel. Follow steps 2-4

above to set temperature alarms on other channels.

Deactivate Temperature Alarm:Press and release the TEMP ALERT button three times to deactivate

all temperature alarms. The alert icons will disappear.

Channels

Explanation: The forecast station will accommodate up to three remote outdoor transmitters. The

channel selection (CH) button on the forecast station allows you to see the temperature in various

locations: outdoors, baby’s room, greenhouse, basement, etc.

Press and release the CH button to view channel 1, 2 or 3 on the display when multiple transmitters

are used.

Note: You cannot change channels if only one transmitter is connected.

CHANNEL SCROLL: Press and release the CH button until you see a circling arrow appear in the

outdoor data area. The display will automatically rotate through the channels for all connected

transmitters.

Press and release the CH button to lock the display into one channel.

Then view channels individually with a press of the CH button.

Multiple Outdoor Transmitters

To connect multiple remote transmitters to the forecast station:

Remove the battery cover from all the transmitters (leave off for setup).

Set the first outdoor transmitter to channel 1 and insert 2 AA batteries.

Set the second outdoor transmitter to channel 2 and insert 2 AA batteries.

Set the third outdoor transmitter to channel 3 and insert 2 AA batteries.

Press and hold CH button on forecast station for 5-10 seconds.

The forecast station will search for all outdoor transmitters.

Press the TX button on the back of each outdoor transmitter to transmit RF signal.

When RF (radio frequency) connection is established, the respective temperature & humidity of the

selected channels will appear on the main unit.

Allow the transmitters and the forecast station to stay 5-10 feet apart for 15 minutes to establish a

solid connection.

Install the battery covers on each sensor.

After 15 minutes, place the remote transmitters in appropriate locations within range of the display.

Press and release the CH button to view channel 1, 2 or 3 on the display when multiple transmitters

are used.

La Crosse Technology, Ltd. Page 7

Mounting/Positioning Outdoor Transmitter

First: Place the outdoor sensor in the desired shaded location and the weather station in the home. Wait

approximately 1 hour before permanently mounting the outdoor sensor to ensure that there is proper

reception.

POSITION

Mount outdoor temperature outdoor sensors vertically.

Protect the outdoor sensor from standing rain or snow and from the overhead sun, which can cause it

to read incorrectly.

Mounting under an eave or deck rail works well.

If you choose, you can construct a small roof or box for the outdoor sensor. Be sure a box has vents.

Mount the outdoor sensor on the North side where to prevent sun from causing incorrect readings.

Mount at least 6 feet in the air for a strong RF (radio frequency) signal.

Outdoor sensors are water resistant, not waterproof.

Avoid more than one wall between the outdoor sensor and the weather station.

The maximum transmitting range in open air is over 330 feet (100 meters).

Obstacles such as walls, windows, stucco, concrete and large metal objects can reduce the range.

Do not mount near electrical wires, transmitting antennas or other items that will interfere with the

signal.

RF (radio frequency) signals do not travel well through moisture or dirt.

Do not mount the outdoor sensor on a metal fence. This significantly reduces the effective range.

MOUNT

Option 1:

Install one mounting screw (not included) into a wall.

Place the outdoor sensor onto the screw (hanging hole on the backside).

Gently pull down to lock the screw in place.

Option 2:

Insert the mounting screw through the front of the outdoor sensor and into the wall.

Tighten the screw to snug (do not over tighten).

Position forecast station

The forecast station has a wide base to sit on a desk or table.

Choose a location 6 feet or more from electronics such as cordless phones, gaming systems,

televisions, microwaves, routers, baby monitors, etc., which can prevent signal reception.

Place within range of the outdoor transmitter.

Be aware of electrical wires and plumbing within a wall. This will interfere with signal reception.

The maximum transmitting range in open air is 330 feet (100 meters).

Obstacles such as walls, windows, stucco, concrete, and large metal objects can reduce the range.

For best WWVB reception, orientate the forecast station with the front of the back facing Ft. Collins,

Colorado.

Distance/Resistance/Interference

Distance:

The maximum transmitting range in open air is over 330 feet (100 meters) between the outdoor

sensor and the weather station. This range is in open air with ideal conditions.

Consider what is in the signal path between the weather station and the outdoor sensor.

Avoid placing electronic in the signal path between the weather station and the outdoor sensor.

Resistance:

Obstacles such as walls, windows, stucco, concrete and large metal objects can reduce the range.

When considering the distance between the outdoor sensor and the weather station (330 feet open

air), cut that distance in half for each wall, window, tree, bush or other obstruction in the signal path.

Closer is better.

Windows reflect the RF (radio frequency) signal.

La Crosse Technology, Ltd. Page 8

Metal absorbs the signal and reduces the range.

Stucco has a metal mesh that absorbs the signal.

Do not mount the outdoor sensor on a metal fence. This significantly reduces the effective range.

Interference:

Consider items in the signal path between the outdoor sensor and the weather station.

Sometimes a simple relocation of the outdoor sensor or the weather station will correct the

interference.

Windows can reflect the radio signal.

Metal will absorb the RF (radio frequency) signal.

Stucco has a metal mesh that absorbs signal.

Avoid transmitting antennas: (ham radios, emergency dispatch centers, airports, military bases, etc.)

Electrical wires (utilities, cable, etc.)

Vegetation is full of moisture and reduces signal.

It is difficult for RF (radio frequency) signal to travel through a hill.

Forecast Station

How tall are the time numbers?

The time numbers are 0.59 inches tall.

Supported Time Zones

This forecast station offers seven time zones:

AST=Atlantic

EST= Eastern

CST= Central

MST= Mountain

PST= Pacific

AKT= Alaska

HAT=Hawaiian

The forecast station is designed to work in North America.

12-Hour or 24-Hour Time Format

Displays the time in 12-hour or 24-hour format.

Default is 12-hour time.

Use the Program Menu to switch time formats.

Power Requirements

3-AA alkaline batteries power the forecast station.

Indoor Comfort Statement

COMFORT STATEMENT: The comfort statement is based on the indoor humidity.

•WET: Humidity is above 64%

•COMFORTABLE: Humidity is between 43% and 64%

•DRY: Humidity is below 42%

Manually Set Time/Date: Program Menu

PROGRAM MENU: The SET button will move through the program menu. The + or -buttons will change

a value. Hold the SET button for 5 seconds to enter the program menu.

WWVB: WWVB and ON will flash. Press and release the + or - button to select OFF if you wish to

disable the WWVB reception. Press and release the SET button to confirm and move to the next

menu item.

La Crosse Technology, Ltd. Page 9

TIME ZONE: The Time Zone will flash three letters. Press and release the + or – button to select

from seven Time Zones: AST=Atlantic, EST= Eastern, CST= Central, MST= Mountain, PST= Pacific,

AKST= Alaska, HAST=Hawaiian time zone. Press and release the SET button to confirm and move

to the next menu item.

DAYLIGHT SAVING TIME: DST and ON will flash. Press and release the + or - button to select OFF

if you do not observe DST change. Press and release the SET button to confirm and move to the next

menu item.

12/24-HOUR TIME: 12Hr will flash. Press and release the + or - button to select 12-hour time. Press

and release the SET button to confirm and move to the next menu item.

FAHRENHEIT OR CELSIUS: °F or °C will flash. Use the + or - button to select your preference.

Press and release the SET button to confirm and move to the next menu item.

HOUR: The Hour will flash. Use the + or - button to set the Hour. Be sure to set the Hour correctly for

AM or PM. Press and release the SET button once.

MINUTES: The Minutes will flash. Use the + or - button to set the Minutes. Press and release the

SET Button once to confirm and move to the next menu item.

SECONDS: The Seconds will flash. Use the + or - button to clear the seconds to 00. Press and

release the SET Button to confirm and move to the next menu item.

YEAR: The Year will flash. Use the + or - button to set the Year. Press and release the SET button to

confirm and move to the next menu item.

MONTH: The Month will flash. Use the + or - button to set the Month. Press and release the SET

button to confirm and move to the next menu item.

DATE: The numeric day will flash. Use the + or - button to set the Date correctly.

Note: If no buttons are pressed for 20 seconds, set mode will time out and return to live display mode,

reflecting whatever adjustments were made before it timed out

Note:Press the + or -button once to adjust by 1 unit or hold for fast scroll adjustment

Sunrise/Sunset Times

CITY SELECTION-SUNRISE/SUNSET TIMES:

Note: Preset City abbreviations are at the end of the instruction manual and quick setup guide.

Choose the city closest to you in a north/south direction. This will provide the most accurate

sunrise/sunset times as the sun moved from East to West.

To select a city location: Select your country, state, and then city location.

Hold the CITY button for 5 seconds.

USA will flash next to the sunrise/sunset time.

Press and release the + or -button to select USA, CAN, or MEX as your country.

Press the CITY button to confirm the country and select a state.

Note:When selecting Canada or Mexico you will move directly to city selection.

The state will flash. Press and release the + or -button to select a state.

Press the CITY button to confirm the state and select a city.

The city location will flash.

Press and release the + or -button to select a city from the list at the end of this manual.

Press the CITY button to confirm and exit.

After a short calculation time, the forecast station shows the times for sunrise and sunset, moon phase

and lunar tide.

TIP: When DST is in effect, the forecast station will need to receive the WWVB time signal to make the

adjustment for DST. The WWVB signal includes an embedded bit to tell the Station to adjust for DST.

Until the forecast station receives the WWVB signal for the first time, the sunrise/sunset times will be one

hour off.

No WWVB Tower Icon

The forecast station has not received a WWVB time signal in the past 24-hours.

Position the forecast station for better reception.

Be sure you have good batteries in the forecast station.

La Crosse Technology, Ltd. Page 10

Hold the + and – buttons together to send the forecast station on a signal search at night.

Allow up to 5 nights to receive the time signal.

Dashes, HH.H, LL.L or stuck Indoor Temperature/Humidity

Explanation: These symbols are error messages indication the indoor sensor is outside of its readable

range. For indoor readings, this is generally a power related issue.

Batteries may be overpowered or underpowered. Remove batteries from the weather station.

Press any button 20 times. Leave the weather station unpowered for 1-2 hours.

Install fresh Alkaline batteries with correct polarity.

If the indoor temperature is still shows dashes, HH.H or LL.L, the weather station may need

replacement.

Inaccurate Indoor Temperature reading

Explanation: When the indoor temperature is inaccurate, it is often due to the location of the display or

overpowered/under powered batteries. You can test the accuracy at you home.

Side-by-side test: Bring the outdoor sensor in the house and place it next to the weather station for 2

hours.

Compare indoor and outdoor temperature. The temperature should be within 4 degrees to be within

tolerance.

Look for heat sources such as sunlight, door or window frames or reflected heat or cold near the

weather station.

Check batteries.

Time is off by hours

Check to see if the WWVB Tower icon appears on the forecast station. If not, the forecast station has

not received a WWVB time signal in the past 24-hours.

Reposition the forecast station with the front or back facing Colorado.

Check that the Time Zone selected correctly reflects your location. Adjust the time zone in the

Program Menu.

Check that the DST indicator is correct for your location (most areas observe DST so this should be

ON). Adjust the DST indicator in the Program Menu.

Set Time Alarm

Set Time Alarm 1: Press and release the ALARM button once to enter Alarm mode. The Alarm Time and

A1 will show.

HOUR: Hold the ALARM button for 3 seconds. The Hour will flash. Use the + or - button to set the

Hour. Be sure to set the Hour correctly for AM or PM. Press and release the ALARM button once.

MINUTES: The Minutes will flash. Use the + or - button to set the Minutes. Press and release the

ALARM button once.

Set Time Alarm 2: Press and release the ALARM button twice to enter Alarm mode. The Alarm Time

and A2 will show. Follow the steps above to program alarm 2.

Activate/Deactivate Time Alarm

ACTIVATE Press and release the ALARM button to enter the correct Alarm mode. Press and release

the +button and the alarm icon will appear (above the time, alarm 1, below the time, alarm 2).

The number in the bell icon indicates which alarm is active.

DEACTIVATE Press and release the ALARM button to enter the correct Alarm mode. Press and

release the +button and the alarm icon(s) will disappear indicating alarm 1 and/or alarm 2 is off.

Snooze Alarm

Andere Handbücher für 308-1451v2

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology TX25U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 327-1417BW Abmessungen

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology V40-PRO Bedienungsanleitung

La Crosse Technology

La Crosse Technology 327-1417V2 Abmessungen

La Crosse Technology

La Crosse Technology WS-9013U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS9090 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2310 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9632U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology V21-WTH Konfigurationshandbuch

La Crosse Technology

La Crosse Technology WD-3102U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS1600IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WW85777v2 Installationsanleitung

La Crosse Technology

La Crosse Technology WS-9740U-IT-NRC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7212U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7059-SU Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA76669 Abmessungen

La Crosse Technology

La Crosse Technology WW85777 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-8015U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1516-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1415BWV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425B Bedienungsanleitung

La Crosse Technology

La Crosse Technology 9245 Bedienungsanleitung

La Crosse Technology

La Crosse Technology M76171 Abmessungen

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung