La Crosse Technology CA74962 Bedienungsanleitung

SET UP GUIDE

Model: CA74962

5-in-1

* in/out temperature/humidity

* wireless charger

* projection display

* alarm clock

* USB charging ports

2.0

time & weather station

Table of Contents

Initial Setup

BASICS

APPENDIX

Initial Setup

Buttons

LCD Display

Accessories & Ports

LCD Display Brightness

Auto-Dim Settings

Display Modes

Display Mode Options

Speciﬁcations

Button Cell Battery

Battery Warning

Trademarks & Warning

Recycling & Disposal

Cautions

Warranty

Canada Statement

Use the +/- buttons on

the top of the station to

adjust the values.

Power Up

Insert 2 “AA” batteries into the Outdoor Sensor.

Insert the 5V Power Adapter into an outlet, and then plug it into the Power Jack

on the bottom of the weather station. Next, remove the Insulation Tab from the

Station’s Battery Compartment.

A greeting will appear on the LCD and the station will then automatically move

into the Settings Menu.

You may exit the Settings

Menu at any time by

pressing the SNOOZE/

BACKLIGHT button.

SENSOR

Search for Sensor

Lost Connection

Low Battery

Sensor Data

Position Sensor

ALARM

Setting the Alarm

Activate/Deactivate

Snooze Duration

PROJECTION

Projection Brightness

Adjusting the Projection

Projection Image Options

CHARGING

5W Wireless Charger

Phone Compatibility

Adjustable Charging Coil

USB Charging Ports

Earbud Charging

Accessory Storage

Smart Watch Stand

Cable Organizer

Press the SET button

to conﬁrm selection and

move to next setting.

Note: Weekday will set automatically after year, month, & date settings are adjusted.

Settings Menu Order

Beep On/O • 12/24 Format • Hour • Minutes • Year • Month • Date • Celsius/Fahrenheit

Note: To enter the Settings Menu after the initial startup, hold the SET button on the top

of the station.

BASICS BASICS

03 04

Buttons LCD Display

1. DISPLAY OPTION

4. PLUS +

2. MINUS -

Tap to select LCD display

mode options

Scroll to rotate the projection

image (left or right)

Press to increase values,

hold to change values quickly

Hold to search for Outdoor

Sensor.

Press to activate/deactivate

alarm. Hold to enter alarm

settings

Press to adjust projection

intensity. Hold to change

projection mode.

Press to adjust backlight or

snooze a sounding alarm.

Hold for Auto-Dim Settings.

Hold to enter Settings

Press to decrease values,

hold to change values quickly

8. ROTATION WHEEL

3. SET

6. ALARM

Accessories are stored in the bottom compartment of your weather station. The Dock Cover is on

the top.

AM/PM

Indicator

Alarm

Indicator

Time

Auto Dim

Indicator

Outdoor

Temperature

Humidity

Display

Modes

Calendar

Temperature

Alarm

Auto-scroll

all modes

Low Battery

Indicator

Accessories Ports

Type C USB

Charging Port

Type A USB

Charging Port

Use,Organize & Store

1. Smart Watch Stand

2. Earbuds Dock

3. Dock Cover

4. Thin Cable Fitting

5. Thick Cable Fitting Power

Jack

CR2032

Backup

Battery

DC 5.0V

5. PROJ.

7. SNOOZE/BACKLIGHT

2356

BASICS BASICS

05 06

LCD Display Brightness Display Modes

Adjusting the LCD Display Brightness Selecting the Display Mode

Display Mode Options

Auto-Dim Settings

Press the SNOOZE/BACKLIGHT button on the top of the station to adjust the

backlight intensity. There are 4 brightness levels, plus an o option. Tap the button on the front of the station to

select a display mode or automatically cycle

through all of the available options.

Hold the SNOOZE/BACKLIGHT

button to enter the Auto-Dim

Settings Menu.

Program your LCD display to automatically dim during preselected times.

Press the +/- buttons to turn the

Auto-Dim feature on or o. Press

the SNOOZE/BACKLIGHT to

conﬁrm.

Press the +/- buttons to adjust the

starting hour. Press the SNOOZE/

BACKLIGHT to conﬁrm.

Press the +/- buttons to adjust the

stopping hour. Press the SNOOZE/

BACKLIGHT to conﬁrm and exit.

The icon will appear on the LCD when activated.

Indoor

Temp/Humidity

The Red Icons on the right side of the LCD

indicate the current display mode.

Weekday

Month + Date

Alarm Time

ON/OFF

Outdoor

Temp/Humidity*

Calendar

Temperature

Alarm

Auto-scroll

all modes

Display

Modes

The icon will appear on the LCD when the

Cycle Mode is active. This setting will automatically

toggle through the available display mode options.

Snooze

Countdown

ALARM ALARM

4. Your time alarm is now activated,

indicated by the icon on the LCD.

2. Use the +/- buttons to set your

desired time. Press the ALARM

button to conﬁrm.

3. Next, use the +/- buttons to set

your desired snooze duration (5

to 120 minutes). Press the ALARM

button to conﬁrm and exit the Alarm

Settings Menu.

Time Alarm

Ascending Alarm

Snooze Duration Countdown

The alarm will increase in frequency over a 2-minute period. After the 2-minute

time frame, the alarm will stop if not snoozed or turned o.

When your alarm sounds, press the

SNOOZE/BACKLIGHT button to snooze

your alarm for your preselected snooze

duration. A countdown will appear on

screen.

When the snooze time reaches “00,” the

alarm will sound again. The snooze feature

can be repeated as many times as desired.

Setting the Alarm

Hold the ALARM button on

the top of the station to enter the

Alarm Settings Menu.

Activating & Deactivating the Alarm

Press the ALARM button to

activate/deactivate the alarm

(ON/OFF).

The icon will appear on the

normal time display when the

alarm is active.

PROJECTIONPROJECTION

1009

Projection OptionsAdjusting the Projection Image

Projection Image Options

The Projection Arm tilts forwards and

backwards to adjust the location of the

projection image.

Use the Rotation Wheel on the Projection Arm to rotate the

viewing angle of the image.

Press the PROJ. button to adjust

the projection’s brightness (HI/

LOW/OFF).

You can choose to see the (1) time, (2) outdoor

temperature and humidity, or (3) cycle through

both options.

Selecting Your Projection Image

When an outdoor sensor is connected, hold the

PROJ. button on the top of the station to toggle

between the projection options. If no sensor

is connected, this button will only adjust the

projection’s brightness.

Time will be the default projection image. Hold and release the PROJ. button

each time to switch between projection modes.

Note: The ﬁxed focus projection image will look best at about 7ft. (2.1m).

Time-Only Projection

Current Time

Outdoor Temperature

and Humidity

Outdoor Temperature &

Humidity-Only Projection

Cycle Through Both Options

Projection Brightness

outdoor

CHARGING CHARGING

11 12

5W Wireless Charger

Charging your Qi-Enabled Phone

Phone Compatibility

• Place your Qi-Enabled phone on the platform.

Your phone should be centered and should

sit ﬂush to the charging cradle.

• The blue Charging Indicator Light below

the platform will be solid when your phone

is successfully charging.

• The light will ﬂash slowly if your device is

not positioned properly or if your device is

not compatible with the Qi wireless charging

technology. If this problem persists, try

removing any large/bulky cases.

Works with all Qi-Enabled phones, such as:

• iPhone 8 or newer

• Galaxy S8 or newer

• Galaxy Note 8 or newer

Compatibility may vary based on phone model and/or case selection.

This list is not comprehensive. Please check your phone’s manual for details

regarding Qi-Enabled capabilities.

Adjustable Charging Coil

As phone sizes can vary greatly, simply slide

the Phone Charger Adjustment Handle up or

down to best match your device and get it

charging correctly.

USB Charging Ports

There is a USB Type “A” Charging Port, and a USB

Type “C” Charging Port located on the back of

your station.

• Connect your external device’s USB charging

cable (not included) into the USB Charging Port.

• Charging times may vary.

• USB Power Output: 1 Amp maximum current

Note: Although this station is capable of

delivering 5W wireless charging, actual

charging times will be determined by your

mobile device.

CHARGING CHARGING

Cable Organizer

Use the included Cable Organizer to keep

your charging cords neat and secure.

Insert the organizer into the Cable Clip

Keyhole and slide it down to lock in place.

Lift up and pull the Cable Organizer out to

remove it.

Smart Watch Stand

The removable Smart Watch Stand is engineered to ﬁt

a variety of smart watch brands. Its open design allows

for easy access to your device’s unique charging port

location, for use with the included USB Charging Port.

How to attach the Smart Watch Stand

Open design ﬁts most

smartwatches, including

Apple Watch

1. Remove the Smart Watch Stand from the Accessory

Compartment on the bottom of the weather station.

2. Insert the watch stand into the left side of the unit.

3. Place your watch on the stand and attach its

charging cord.

4. Plug the charging cord into the correct USB port.

Note: Smartwatch and charging cords not included.

Earbud Charging

1. Remove the Dock Cover from the top of the

station.

2. Open the bottom Accessory Compartment

and ﬁnd the Earbud Dock and Cable Fittings.

3. Feed your earbud charging cable (not

included) up through the Earbud Dock,

securing it with the correct Thick or Thin

size Cable Fitting.

4. Wrap any extra cord up inside the Accessory

Compartment and feed the charging end

through the bottom hole.

5. Plug the cord into the appropriate 1 amp

USB Charging Port.

The Earbud Dock, Cable Fittings, and Smart Watch Stand can all be stored in the

Accessory Compartment on the bottom of the station when not in use.

Accessory Storage

SENSOR

Search for Sensor

SENSOR

The sensor’s data should then be viewable on your LCD and as an option to be

projected.

Projection

Image

Outdoor

Temp/Humidity

Sensor Data

Lost Connection

• The Sensor Reception Icon will disappear from the bottom right of the LCD

and the station will search for up to 3 minutes every hour to try to reestablish the

connection.

• To manually reconnect, hold the + button on the top of the station to search for the

sensor.

• Dashes will show while searching for the sensor and the icon will flash

for up to 3 minutes or until the sensor is connected.

• If the sensor loses connection to the station for any reason, the station will

show NO after 30 minutes of disconnection.

The icon will appear when the sensor

batteries needs to be replaced.

Low Battery

Insert a screw through the front hanging hole to

mount the sensor outside in a shaded location.

For more details, watch our video here:

bit.ly/th_sensor_mounting.

Position Sensor

outdoor

Speciﬁcations

APPENDIX

Weather Station CA74962

Power Requirements: Input: 5.0VDC 3.5A Power Cord

(Included) HX20A-0503500-AU

CR2032 Battery for backup (Included)

The plug on the power adapter is intended to serve

as the disconnect device, the socket-outlet shall

be installed near the equipment and shall be easily

accessible.

Indoor Temperature Range:

0°C to 50°C (32°F to 122°F)

Indoor Humidity Range: 10% to 99% RH

LCD Brightness: 4 Intensity Levels + OFF

(Programmable Auto-Dim Backlight option)

Projection Brightness: 2 Intensity Levels + OFF

Programmable Snooze Duration:

5 to 120 Minutes

Dimensions:

21.31cm Lx11.98cm Wx12.34cm H

(8.39in Lx4.72in Wx4.86in H)

Settings Backup: The CR2032 Battery will

save Time and Alarm Settings when power is lost.

Projection will not show.

Button Cell Battery

APPENDIX

Battery replacement instruction:

When batteries of dierent brand or type are used together,

or new and old batteries are used together, some batteries

may be over-discharged due to a dierence of voltage or

capacity. This can result in venting, leakage, and rupture and

may cause personal injury.

• Always purchase the correct size and grade of battery

most suitable for the intended use.

• Always replace the whole set of batteries at one time,

taking care not to mix old and new ones, or batteries of

dierent types.

• Clean the battery contacts and those of the device

prior to battery installation.

• Ensure the batteries are installed correctly with regard

to polarity (+ and -).

• Remove batteries from product during periods of non-

use. Battery leakage can cause corrosion and damage

to this product.

• Remove used batteries promptly.

• For recycling and disposal of batteries, and to protect

the environment please check the internet or your local

phone directory for local recycling centers and/ or

follow local government regulations.

Replace the Coin Cell Battery

1. Use a coin to turn the battery cover to the left to remove it.

2. Pull back the metal pin and gently remove the battery.

3. Insert a fresh CR2032 battery with the +side up and snap

into place.

4. Replace the battery cover and use the coin to turn it to the

right to lock.

Swallowing may lead to serious injury in as little as 2 hours

or death, due to chemical burns and potential perforation

of the esophagus.

If you suspect your child has swallowed or inserted a

button battery, immediately seek urgent medical assistance.

Examine devices and make sure the battery compartment

is correctly secured, e.g. that the screw or other mechanical

fastener is tightened.

Do not use if compartment is not secure.

Dispose of used button batteries immediately and safely.

Flat batteries can still be dangerous.

Tell others about the risk associated with button batteries

and how to keep their children safe.

This product contains a button battery.

If swallowed, it could cause severe injury or death in

just 2 hours.

Seek medical attention immediately.

WARNING

WARNING:

KEEP BATTERIES OUT OF REACH OF CHILDREN

Outdoor Sensor TX141TH-Bv3

Outdoor Temperature Range:

-40°C to 60°C (-40°F to 140°F)

Outdoor Humidity Range: 10% to 99% RH

Transmission Range: Over 100 meters (330 feet)

in open air RF 433MHz

Power Requirement: 2 “AA” LR6 Batteries

(included)

Battery Life: Over 24 months with reputable

batteries

Dimensions:

3.98cm L x 2.0cm W x 13.0cm H

(1.57” L x 0.79” W x 5.11” H)

This product operates on alkaline batteries.

However, it is suggested to use lithium batteries

in areas where the temperatures is consistently

below -30°C (-22°F)

Charging:

Wireless Charger Power Output: 5 Watts

USB “A” and “C” Charging Port: 1 Amp

Maximum Current (Charging Cords Not Included)

Inhaltsverzeichnis

Sprachen:

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS-2811U-IT Technisches Datenblatt

La Crosse Technology

La Crosse Technology 308-141WBV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Tomorrow's Weather Today WS-7394U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9025U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6890 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-1611T Bedienungsanleitung

La Crosse Technology

La Crosse Technology S75617 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX-440-TH Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX231TH Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1610TWC-IT Technisches Datenblatt

La Crosse Technology

La Crosse Technology WS-2510 Bedienungsanleitung

La Crosse Technology

La Crosse Technology S88907V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7014CH-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7075U Bedienungsanleitung

La Crosse Technology

La Crosse Technology V50-C78861 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1414WBV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology C79790V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6206 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7212U Bedienungsanleitung

La Crosse Technology

La Crosse Technology S98642 Betriebsanleitung

La Crosse Technology

La Crosse Technology WS-7394U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS9090 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425C Bedienungsanleitung

La Crosse Technology

La Crosse Technology KCombo3 WS-9080U-IT WS-9640U-IT Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung