La Crosse Technology T83653v2 Bedienungsanleitung

Model: T83653v2 www.lacrossetechnology.com/support Page | 1

Model: T83653v2

Instruction manual

DC: 012916

WIRELESS COLOR FORECAST STATION

Mold Risk for Forecast Station & Indoor Remote Sensor Location

Batteries

3 “AAA”

BACK

VIEW

AC adapter

HX09-0501500-AU

USB

Port

BUTTONS

Color Animated Forecast with Tendency

Indoor

Humidity &

Temperature

with Trend

and Alerts,

Indoor

Comfort

Statement +

Button Press

for Mold Risk

Indicator

Remote

Humidity &

Temperature

with Trend

and Alerts (up

to 3

channels),

Remote

Comfort

Statement +

Button Press

for Mold Risk

Indicator

FRONT

VIEW

Time, Alarm + Calendar

AAA

Model: T83653v2 www.lacrossetechnology.com/support Page | 2

Remote Sensor TX141TH-BCH

Get Started

1. Insert the 5.0 volt AC cord (included) into the wall outlet then into the

forecast station.

2. Insert 3 new AAA Alkaline batteries (not included) into the forecast

station. Observe the correct polarity.

3. Insert 2 new AA batteries (not included) into the TX141TH-BCH

remote sensor. Observe the correct polarity. The red LED will flash

during transmission.

4. After 15 minutes mount the sensor outside in a shaded location.

Transmission range is 300 feet (91 meters) open air.

Restart: If the outdoor temperature shows dashes, unplug the AC

adapter and remove batteries from the forecast station and remote

sensor for 15 minutes. Return to Step 1 above.

Set Time, Date, Temperature Unit

Hold the SETTINGS button to enter settings mode.

1. Press the +or -buttons to adjust the values.

2. Press the SETTINGS button to confirm adjustments and move to the

next item.

SETTINGS ORDER:

1. Beep ON/OFF

2. 12/24 hour time format

3. Hour

4. Minutes

5. Year

6. Month

7. Date (day of the week will set automatically)

8. Fahrenheit/Celsius

Batteries

2 “AA”

LED

Transmit button (TX)

Sensor Channel Selector

Model: T83653v2 www.lacrossetechnology.com/support Page | 3

Press the SETTINGS button to exit, or wait 20 seconds without pressing

buttons to return to the normal time display.

Set Indoor and Remote Temperature Alerts

1. Hold the ALERTS button for 3 seconds to enter alert set mode.

2. The temperature alert value will blink in set mode.

3. Press the -or +buttons to adjust the values.

4. Press the ALERTS button to confirm

5. Press the -or +buttons to arm or disarm the Alert and move to the

next alert.

The alert setting order:

INDOOR HUMIDITY HI INDOOR HUMIDITY LO INDOOR TEMP HI

INDOOR TEMP LO OUTDOOR HUMIDITY HI OUTDOOR

HUMIDITY LO OUTDOOR TEMP HI OUTDOOR TEMP LO

Note: When using multiple sensors, press the +button to select the

channel (1, 2, or 3) before entering Alert Set Mode.

Press the ALERTS button to exit, or wait 20 seconds without pressing

buttons to return to normal time display.

Arm/Disarm Temperature/Humidity Alerts

Press and release the ALERTS button to toggle between the alerts:

INDOOR HUMIDITY (HI/LO) OUTDOOR HUMIDITY(HI/LO) 

INDOOR TEMP (HI/LO) OUTDOOR TEMP (HI/LO)

•Press the +button to arm the alert.

•Press the -button to disarm the alert.

•The HI or LO alert icon appears when armed.

Active Temperature Alert

•Beeps once per minute with flashing alert icon.

•Press and release the ALERTS button to toggle between the alerts.

•Press the -button to disarm the alert.

Adjust Backlight

When using AC power:

•AC power required for a constant backlight.

•Press the LIGHT button to adjust the backlight (Bright/Dim/Turn Off)

when using AC power.

When using Battery power only:

•Press the LIGHT button for 10 second backlight (will not stay on).

Model: T83653v2 www.lacrossetechnology.com/support Page | 4

Set Time Alarm

1. Hold the ALARM button to enter set mode.

2. Press the -or +buttons to adjust the values.

3. Press the ALARM button to confirm & move to the next item.

Alarm Time setting order: 1. Hours, 2. Minutes

Activate/Deactivate Time Alarm

•Press the ALARM button once to view alarm time.

•Press the ALARM button again to activate the alarm.

Once activated, the bell icon appears.

•Press the ALARM button again to deactivate the alarm.

The bell icon will disappear.

Snooze (Silences Alarm Temporarily)

•When alarm sounds, press the LIGHT button to silence the

alarm for 10 minutes.

•The snooze icon will flash.

•In snooze mode, press any button except ALARM to stop alarm for

one day.

Note: The alarm is crescendo sound. The alarm sounds for two minutes

and then will shut off completely.

USB Charge Port

Charge a smart phone, camera, or other devices when the projection

alarm is plugged into a power outlet with the included 5.0V AC adapter.

Note: This is a power-output charging port. It does not supply power to

the projection alarm.

•Connect your external device’s USB charging cable (not included) to

the USB charging port.

•Charging times will vary.

•USB Power Output: 1A maximum current. Charge 1A devices or

devices that are self-regulating.

Note: Some USB cables are for data transfer only and cannot be used

for charging. Make sure that the USB cable you use will charge your

device. Most USB cables included with mobile devices will work for

charging.

Model: T83653v2 www.lacrossetechnology.com/support Page | 5

Indoor/Remote Comfort Displays

The indoor comfort display is based off of the humidity read by the

forecast station. The remote comfort display is based off the humidity

read by the remote sensor(s). The forecast station will display one of five

indicators:

Heat Index/Dew Point/Mold Risk

Press the INFO button repeatedly to toggle between:

•Heat Index (outdoor)

•Dew Point (outdoor)

•Mold Risk (indoor/outdoor)

Heat Index, Dew Point and Mold Risk indicators are available for up to

three remote locations (when using multiple sensors).

When using multiple sensors press the +button to view readings on a

different channel.

Remote Sensor Channels-Auto Scroll

•Press the +button to toggle between remote sensor channels when

multiple sensors are used.

•The forecast station will automatically rotate through the channels for

all connected sensors.

•

•Press and release the +button to lock the forecast station into one

channel. Then view channels individually with a press of the +

button.

Note: When multiple remote sensors are used, Heat Index, Dew

Point and Mold Risk will be available for each remote sensor.

View/Reset MIN/MAX Values

The station automatically resets minimum and maximum values daily at

midnight (12:00 AM).

•Press and release the -button to view minimum and maximum

values.

•Hold the -button to manually reset minimum and maximum values.

1- 25%

26-39%

40-75%

76-83%

84-99%

Auto

Scroll

Icon

Model: T83653v2 www.lacrossetechnology.com/support Page | 6

Animated Color Forecast Icons

Animated forecast icons use changing atmospheric pressure to predict

weather conditions for the next 12-hours with 70-75% accuracy.

Note: Snowy icon will appear in place of rainy and stormy icons when

the outdoor temperature (Channel 1) is below 32°F.

INTELLIGENT WEATHER FORECAST

This station learns. Please allow 3 to 4 weeks for barometric calibration.

This will ensure an accurate personal forecast for your location.

Forecast Tendency Indicators (Up, Right and Down Arrows)

Rising Pressure.

Weather is Expected

to Improve.

Steady Pressure.

Weather is Expected

to Stay the Same.

Falling Pressure.

Weather is Expected

to Worsen.

Temperature/Humidity Trend Indicators

The temperature (2°F / 1°C) and humidity (3% RH) trend indicators

update every 30 minutes or less.

•Temperature has risen in the past 3 hours.

•Humidity has risen in the past 3 hours.

•Temperature has not changed in the past 3 hours.

•Humidity has not changed in the past 3 hours.

•Temperature has fallen in the past 3 hours.

•Humidity has fallen in the past 3 hours.

Search for Remote Sensor

•Hold the INFO button to search for the remote sensor.

•The strength signal icon will animate until the sensor signal is

received or for 3 minutes if no signal available.

Model: T83653v2 www.lacrossetechnology.com/support Page | 7

Setup with Multiple Remote Sensors

The forecast station will accommodate up to three remote outdoor

sensors (TX141TH-BCH or TX141TH-ACH not included).

Press the +button to easily see the temperature in various locations:

outdoors, baby’s room, greenhouse, basement, etc. Monitor remote

temperature in up to 3 locations within a 300 ft. wireless range of the

forecast station.

To connect multiple remote sensors to the forecast station:

1. Remove the battery cover from all the sensors (Leave battery covers

off until all sensors are received by the forecast station).

2. Set the first remote sensor to Channel 1 and insert 2

AA batteries.

3. Set the second remote sensor to Channel 2 and insert 2 AA

batteries.

4. Set the third remote sensor to Channel 3 and insert 2 AA batteries.

5. Press and hold the INFO button on the forecast station for 5

seconds. The forecast station will search for all remote sensors.

6. Press the TX button on each remote sensor to transmit RF signal.

7. When RF connection is established, the temperature & humidity for

each of the selected channels will appear on the main unit.

8. Allow the sensors and the forecast station to stay 5-10 feet apart for

15 minutes to establish a solid connection.

9. Install the battery covers on each sensor.

10. After 15 minutes place the remote sensors in appropriate locations.

Press and release the +button to view channels 1, 2 or 3 on the forecast

station when multiple sensors are used.

Note: If only one sensor is connected the other channels will show

dashes for temperature and humidity.

Low Battery Icon

Low battery icon indicates low battery for station or sensor.

•If the icon is displayed in Remote Temperature section,

replace batteries in the remote sensor.

•If the icon is displayed in Indoor Temperature section,

replace batteries in the forecast station.

Remote Sensor Use and Positioning

Outdoor use: Mount the remote sensor on a north-facing wall or in any

well shaded area. Under an eave or deck rail is preferred.

Low Battery

Icon

Model: T83653v2 www.lacrossetechnology.com/support Page | 8

Indoor use: Mount the remote sensor indoors to monitor high mold risk

areas like in a crawl space, attic, or basement.

•The maximum wireless transmission range to the forecast station is

over 300 feet (91 meters) in open air, not including walls or floors.

•Be sure the remote sensor is mounted vertically.

Forecast station Care & Maintenance

•Do not mix old and new batteries

•Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries

•Always purchase the correct size and grade of battery most suitable

for the intended use.

•Replace all batteries of a set at the same time.

•Clean the battery contacts and also those of the device prior to

battery installation.

•Ensure the batteries are installed with correct polarity (+ and -).

•Remove batteries from equipment when it not to be used for an

extended period of time.

•Promptly remove expired batteries.

•Do not expose to extreme temperature, vibration or shock.

Warranty and Support Information

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from

date of purchase) on this product relating to manufacturing defects in

materials & workmanship.

Before returning a product, please contact our friendly customer

support with questions or visit our online help (manuals and FAQS):

Phone: 1-608-782-1610

Online Product Support: www.lacrossetechnology.com/support

Product Registration:

www.lacrossetechnology.com/support/register

View full warranty details online at:

www.lacrossetechnology.com/warranty_info.pdf

Warranty Address:

La Crosse Technology, Ltd

2830 S. 26th St.

La Crosse, WI 54601

Protected under U.S. Patents:

5,978,738 | 6,076,044 | RE43903

Model: T83653v2 www.lacrossetechnology.com/support Page | 9

Specifications

Indoor:

Temperature

Range:

32°F to 122°F (0°C to 50°C)

Humidity Range: 1%-99% (RH)

Interval:

About every 30 seconds

Outdoor:

Temperature

Range: -40°F to 140°F (-40°C to 60°C)

Humidity Range: 1%-99% (RH)

Distance: Over 300 ft. (91 meters) RF 433MHz (open air)

Power:

Forecast station

Primary AC Power: 5.0 volt AC 1.5A power adapter (included)

AC/6 Adapter No.: HX09-0501500-AU

Optional/Battery Optional 3-AAA, IEC, LR3 batteries (not included)

TX141TH-BCH

Remote Sensor: 2-AA, IEC, LR6 batteries (not included)

Battery Life:

Forecast station

Battery Backup: Battery life is over 12 months when using the AC

adapter for primary power

TX141TH-BCH

Remote Sensor: Battery life is over 24 months when using

reputable battery brands.

Dimensions:

Forecast station:5.91" L x 1.66" W x 4.84" H

(150.1 x 42.2 x 122.9 mm)

TX141TH-BCH

Remote Sensor: 1.57"L x 0.79"W x 5.12"H (40 x 20 x 130mm)

FCC Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

Model: T83653v2 www.lacrossetechnology.com/support Page |

accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for

help.

This device must not be co-located or operating in conjunction with any

other antenna or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference

caused by unauthorized modifications to this equipment. Such

modifications could void the user authority to operate the equipment.

even in part, or duplicated or processed using electronic, mechanical or

chemical process without the written permission of the publisher.

This booklet may contain errors or misprints. The information it contains

is regularly checked and corrections are included in subsequent editions.

We disclaim any responsibility for any technical error or printing error, or

their consequences.

All trademarks and patents are recognized.

Andere Handbücher für T83653v2

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology K84322 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS2300 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6890 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-9124U-IT-CA Bedienungsanleitung

La Crosse Technology

La Crosse Technology S86842 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology T83646v2 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology C87030 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7042 Bedienungsanleitung

La Crosse Technology

La Crosse Technology CA84688 Abmessungen

La Crosse Technology

La Crosse Technology WS-7034U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 327-1417V2 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology C75747-AU Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7208TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology V22-WRTHV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7211U Bedienungsanleitung

La Crosse Technology

La Crosse Technology V23 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1612 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Tomorrow's Weather Today WS-7394U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS9245 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9037U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2813U-IT Technisches Datenblatt

La Crosse Technology

La Crosse Technology C80758-AU Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7078UF Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung