La Crosse Technology V23 Bedienungsanleitung

SET UP GUIDE

MODEL NUMBER V23

Wi-Fi COLOR WIND SPEED

+ WEATHER SYSTEM

and Double Your Warranty

Scan Here

Scan the QR Code or visit: bit.ly/v23_register

to register your product and to double the standard one-year

warranty for free by opting to receive occasional product emails.

BASICS

SUPPORT

LA CROSSE VIEW

APPENDIX

Initial Setup

Display Settings

Buttons

LCD Display Brightness

Auto-Dim Settings

Time & Calendar Display

We’re Here to Help

Factory Reset

Stay in Touch

Connecting to the App

Connecting Your Display

Adding Your Sensors to

the App

Data Stream Technology

Speciﬁcations

Cautions & Statements

Recycling & Disposal

WIND

Viewing Wind Data

Wind Speed Records

Customizable Alerts

SENSORS

Placement & Mounting

Glide Pro Sensor

Installation

Add-On Sensors

Adding Sensors to Your

Display

Viewing Your Add-On

Sensor Data

20-21

22-23

FORECAST

Viewing Forecast Data

Viewing Extended Daily

and Hourly Forecast Data

Day/Night Forecast

Moon Phase

10-12

PRESSURE

Relative Pressure 13

TEMP. AND HUMIDITY

Viewing Temperature and

Humidity Data

Temperature and Humidity

Records

“Feels Like” Temperature

Customizable Alerts

25-28

Table of Contents

Initial Setup

BASICS

Power Up

Note: It may take up to 10 minutes for the sensor data to appear on your display.

Thermo-Hygro Sensor

Slide the battery cover down to remove it. Install 2 fresh “AA” batteries according to polarity and snap

the cover back into place. The blue LED light will ﬂash when transmitting.

Glide Pro Sensor

Slide the outer cover down to remove it. Then remove the inner battery cover and install 3 fresh “AA”

batteries according to polarity. Replace both the battery cover and outer cover.

Display

Insert the 5V Power Adapter into an outlet, and then plug it into the Power Jack on the bottom of

the display. Next, remove the Insulation Tab from the Battery Compartment. About 30 seconds after

powering on, it will automatically enter the Settings Menu. See page 06 for more details.

Power Jack

Glide Pro Sensor (LTV-W3) Back of Display (V23)Thermo-Hygro Sensor

(LTV-TH2i)

Connecting to the App

LA CROSSE VIEW

Download the La Crosse View App

Visit the App Store or Google Play Store to download the free

La Crosse View app onto your mobile device.

Launch the App

Connecting Your Display to the App

Open the La Crosse View app. Follow the on-screen setup

instructions to create an account, add new devices, and connect

your display to your Wi-Fi network.

Stay connected to your home anytime, anywhere with the

La Crosse View app.

Monitor your home environment and set custom alerts to notify

you when conditions change.

Connecting is optional and the display will function as a

standalone unit without the Wi-Fi connection. However, we

recommend connecting during the initial setup, as it will save you

time and allows access to some advanced features right away.

Stay Connected to Your Home

Anytime, Anywhere.

Now that you’ve created your La Crosse View account, it’s time to add your system to your

account and connect it to your home router using the La Crosse View app.

Note: For the steps listed on the next page, you’ll need your Wi-Fi network name (SSID)

and password. Make sure your mobile device is connected to the same Wi-Fi network.

Adding & Connecting Your Display to Wi-Fi

LA CROSSE VIEW

Checking Your Display’s Wi-Fi Status

Press the SET button on the top of the display to view your Wi-Fi Status.

Having Trouble Connecting to Wi-Fi?

The app should guide you through the best method for your Wi-Fi network and router. However,

if you have trouble connecting, please go to: bit.ly/wiﬁ_questions or scan the QR code. This will

explain additional connectivity options, including connecting by WPS or contacting our technical

support team for further assistance.

The La Crosse View app is required to connect the display to your Wi-Fi network. Download, install,

and log into your La Crosse View account ﬁrst.

New User Initial Setup: When ﬁrst setting up your

system, the app will lead you through a series of

instructions to help get your system added into your

account and connected to your home Wi-Fi network.

Manually Add & Connect Display: After the initial walkthrough,

displays can be added and connected via the Devices tab in

the app’s main menu. Simply tap the Add Device or +button

at the bottom of the Devices page in the app.

Follow the initial app instructions or manually add the display into your account.2.

Next, the app will prompt you to use your phone to scan the device ID barcode located on the back of

the display. Please note, adding a device to your account and connecting it to Wi-Fi are two dierent

steps. You can complete either step separately if you have any trouble.

When connected, the display will beep, and time and forecast information should appear on the screen.

The indicator will also become solid.

ALL OK CONNECTED: Your system is connected to your

Wi-Fi and its data should be available on the display and

in the app.

SEE APP TO CONNECT: Check the app for notiﬁcations.

NO WEATHER SERVICE: Your Internet weather and time

services are not connecting. These should resolve on their

own, please be patient.

LOST WIFI: Check your router and network connections.

* This step is only required if you do not receive the Add Device

notiﬁcation within the app.

Prior to mounting/positioning your sensors, make sure your

display is receiving sensor data.

Upon getting the display connected to your Wi-Fi network, the app will

explain how your connected sensors should be brought in. Within the

next 15 minutes, you should receive an Add Device notiﬁcation in your

app. This is indicated by the Red Cloud and the number inside of it. Tap

this icon to begin adding your sensors into the app.

Manually Add Your Sensors to the App*

Open your La Crosse View app. On the

Main Menu, scroll to ADD/EDIT and select

DEVICES.

Scan the Barcode on your Sensor or type

in the Device ID manually.

Conﬁrm the sensor image and Device

ID and add a Device Name and Location

Name. Select DONE.

On the Devices page, select the ADD

DEVICE or PLUS (+) button.

100%

Add Device SaveCancel

12:34

Please wait up to 15 minutes

for your additional devices

to connect to your account.

If you do not receive device

notifications, go to the Main Menu

and select Add/Edit Devices to

add your devices separately.

Check the notification icon when

your devices are ready to add.

Adding Your Sensors to the App

LA CROSSE VIEW

123456-ABC

▲ Back of Thermo-Hygro Sensor

Inside of Glide Pro Sensor 

Display Settings

BASICS

About 30 seconds after powering on, the display will automatically enter the Settings Menu.

Use the steps below to navigate the menu and get your display working the way you’d like.

Settings Menu Order

 HELLO Greeting

 Language (English/Spanish/French/German)

 Beep On/O

 Time Format (12 or 24 Hour)

 Hour | Minute | Year | Month | Date

 Calendar Order (Month/Date or Date/Month)

 Temperature Units (Fahrenheit or Celsius)

 Temperature Decimal On/O

 Pressure Units (InHg or hPa)

 Custom Pressure Value

 Wind Speed Units (MPH or KPH)

 Wind Direction (Letters or Degrees)

 THANK YOU Message

Important: Settings such as language and units of measure must

be set manually within the display Settings Menu. These are not

controlled by the La Crosse View app.

The language selected will aect menu instructions as well as

weekday and month readouts.

Weekday will set automatically after year, month, and date

settings are adjusted.

When in 24 hour time format, seconds will show in place of

AM/PM markings.

If you’re connected to Wi-Fi, the time/date will automatically

update from the Internet. See pages 03-05 for more info.

Navigating the Settings Menu

To manually set language, time/date, and

other settings, hold the SET button to enter

the Settings Menu.

Use the +/- buttons on the top of the display

to adjust the values.

Press the SET button to conﬁrm your

selection and move to the next setting.

You may exit the Settings Menu at any time

by pressing the LIGHT button.

Front of Display Back of Display

Buttons

BASICS

* Your display must be connected to Wi-Fi to receive Daily/Hourly forecast information.

1. ALERTS: Hold to enter Alert Settings. Press to conﬁrm and move to next item. Use the + or - buttons

to arm or disarm an alert, and to adjust alert values.

2. WIND: Press to view Wind Speed History. While viewing, hold the MINUS (-) button to reset the

history value. Hold the WIND button to search for the Glide Pro sensor.

3. SET: Press to view Wi-Fi status. Hold to enter the Settings Menu.

4. PLUS/MINUS (+/-): Use to adjust values. When in Alert Settings, press to arm/disarm alert.

5. TEMP: Press to view Temperature & Humidity History. While viewing, hold the MINUS (-) button to reset

history value. Hold the TEMP button to search for the Thermo-Hygro Sensor.

6. LIGHT: Press to adjust backlight or to exit settings. Hold to enter Auto-Dim settings.

7. EXTRA SENSOR ( ): Tap to view sensor ID numbers. While viewing, hold the MINUS (-) button

delete the sensor. Hold the EXTRA SENSOR ( ) button to search for new sensors.

8. EXTENDED FORECAST ( ): Tap to see Daily or Hourly Forecast. Hold to auto-scroll forecast data.*

9. WIFI: Press during initial setup for Wi-Fi Connection. Hold to re-enter Conﬁguration Mode and

clear previous Wi-Fi settings.

Adjusting the LCD Display Brightness

Press the LIGHT button on the top of the display

to adjust the backlight intensity. There are four

brightness levels, plus an o option.

LCD Display Brightness

BASICS

Note: Only the starting and stopping hours can be set. The Auto-Dim Icon ( ) will appear on the

LCD when the Auto-Dim feature is activated.

Auto-Dim Settings

Program your display to automatically dim during preselected times.

1. Hold the LIGHT button to enter the Auto-Dim

Settings Menu.

2. Press the +/- buttons to turn the Auto-Dim

feature on/o. Press LIGHT to conﬁrm.

4. Press the +/- buttons to adjust the stopping

hour. Press LIGHT to conﬁrm and exit.

3. Press the +/- buttons to adjust the starting

hour. Press LIGHT to conﬁrm.

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology V42 Bedienungsanleitung

La Crosse Technology

La Crosse Technology KCombo3 WS-9080U-IT WS-9640U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-1912 Bedienungsanleitung

La Crosse Technology

La Crosse Technology T83646 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8035 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1412-3TX Abmessungen

La Crosse Technology

La Crosse Technology 512-807 Technisches Datenblatt

La Crosse Technology

La Crosse Technology V50AU Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1417v3 Abmessungen

La Crosse Technology

La Crosse Technology Outdoor Sensor Handbuch

La Crosse Technology

La Crosse Technology 308-1451 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9065TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8158U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8015TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8025AL Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS6835 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2310 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7136U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS9029UITCA Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1412 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7107U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9037U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2510 Schulungshandbuch

La Crosse Technology

La Crosse Technology WS-9057U Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung