La Crosse Technology WS-9055TWC Bedienungsanleitung

WS-9055TWC

Wireless 433 MHz

Weather Station

Instruction Manual

TABLE OF CONTENTS

Topic Page

Quick Setup 3-5

Inventory of Contents 6-7

Detailed Setup Guide

Battery Installation 7

Setting the Time 8

Features

Minimum and Maximum

Temperatures 9

Resetting Minimum and

Maximum Temperatures 10

Adding additional remote

temperature sensors

(optional)

10-11

Weather Forecast 12

Weather Icons 13-14

Tendency Arrow 14

Mounting 15-16

Troubleshooting 16-18

Maintenance and Care 18-19

Specifications 19-20

Warranty Information 21-26

QUICK SETUP

Hint: Use good quality Alkaline

Batteries and avoid rechargeable

batteries.

1. Have the indoor temperature

station and remote temperature

sensor 3 to 5 feet apart.

2. Batteries should be out of both

units for 10 minutes.

3. Place the batteries into the

remote temperature sensor first

then into the indoor temperature

station.

(All remote temperature sensors must

be started before the indoor

temperature station)

4. DO NOT PRESS ANY

BUTTONS FOR 15 MINUTES.

In this time the indoor temperature

station and remote temperature sensor

will start to talk to each other and the

display will show both the indoor

temperature and an outdoor

temperature. If the indoor

temperature station does not display

both temperatures after the 15

minutes please retry the set up as

stated above. After both indoor and

outdoor temperatures are displayed

for 15 minutes you can place your

remote temperature sensor outdoors

and set your time.

The remote temperature sensor

should be placed in a dry, shaded

area. The remote temperature sensor

has a range of 80 feet. Any walls that

the signal will have to pass through

will reduce distance. An outdoor

wall or window can have up to 30

feet of resistance and an interior wall

can have up to 20 feet of resistance.

Your distance plus resistance should

not exceed 80 ft. in a straight line.

NOTE: Fog and mist will not harm

your remote temperature sensor but

direct rain must be avoided.

To complete the set up of your indoor

temperature station after the 15

minutes have passed please follow the

steps in the detailed set up guide on

page 8.

INVENTORY OF CONTENTS

1. The indoor weather station (Figure

2. The remote temperature sensor

(TX6U) and mounting bracket.

(Figure 2)

3. 3 each, 1/2” Philips screws.

4. One strip of double sided adhesive

tape.

5. Instruction Manual and Warranty

Card.

ADDITIONAL EQUIPMENT

(not included)

1. 1 Philips screwdriver.

2. 2 Fresh AA Alkaline batteries.

3. 2 Fresh AA Alkaline batteries

DETAILED SETUP

GUIDE

Battery Installation

Figure 2

Holder

Figure 1

1. Install 2 AA batteries in the remote

temperature sensor. Make sure they

do not spring free, or start-up

problems may occur.

2. Install 2 AA batteries in the indoor

weather station. Do not press any

buttons for

at least

fifteen

minutes.

Setting the time

1. Press and hold the “SET” key for 4

seconds.

2. The hour will flash.

3. Press and release the “+” key to

advance the hour.

4. Press and release the “SET” key.

5. The minute is flashing.

6. Press and release the “+” key to

advance the minutes.

7. Press and release the “SET” key to

exit programming.

FEATURES

Minimum and Maximum

Temperatures

1. Press and release the “MIN/MAX”

button, “MAX” appears between the

indoor and remote temperatures.

2. The recorded maximum indoor and

remote temperature is displayed.

3. Press and release the “MIN/MAX”

button.

4. “MIN” appears between the indoor

and remote temperatures.

5. The recorded minimum temperature

is displayed.

6. Press and release the “MIN/MAX”

button to exit min/max mode.

7. To view optional additional sensors,

press and release the “CH” button

while viewing the minimum or

maximum temperatures.

Resetting Min and Max Temperatures

To reset both the minimum and

maximum temperatures—press and

hold the “MIN/MAX” button for 5

seconds.

Adding Additional Remote

Temperature Sensors (optional)

The WS-9055U is able to receive

signals from 3 different remote

temperature sensors. Following are

some brief instructions for the basic

set-up of remote temperature sensor

units with the WS-9055U. These extra

remote temperature sensors can be

purchased through the same dealer as

this unit, or by contacting La Crosse

Technology directly. A TX6U will

monitor temperature only, a TX3U

will monitor temperature and display

the temperature on its LCD, and the

TX3UP will monitor the temperature

of water or soil via a probe.

When setting up multiple remote

temperature sensors, it is important to

remove the batteries from all existing

units in operation, then to insert

batteries first into all the remote

temperature sensors. Second install

batteries into the indoor weather

station and do not press any buttons

for ten minutes. Transmission

problems will arise if this is not done

correctly.

To view the temperature of a different

remote temperature sensor unit, press

and release the “CH” button. A shift

from one number to the next should

be observed in the OUTDOOR LCD.

Andere Handbücher für WS-9055TWC

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS-2315CH Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9115TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology Tomorrow's Weather Today WS-7394U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX231TH Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS9090 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 724-1710 Bedienungsanleitung

La Crosse Technology

La Crosse Technology TX141TH-B Bedienungsanleitung

La Crosse Technology

La Crosse Technology S85814V2 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-8120U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1417v3 Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-145 Bedienungsanleitung

La Crosse Technology

La Crosse Technology ED31411 Bedienungsanleitung

La Crosse Technology

La Crosse Technology C84343 Bedienungs- und Wartungshandbuch

La Crosse Technology

La Crosse Technology WS-9400U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9133BK-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology Wireless Weather Station Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9410TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology C84612 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7014U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2315 Bedienungsanleitung

La Crosse Technology

La Crosse Technology C80758-AU Bedienungsanleitung

La Crosse Technology

La Crosse Technology S88907V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1425C Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung