La Crosse Technology WS-9611U Bedienungsanleitung

WIRELESS WEATHER STATION

WITH ADVANCED FORECAST ICON

Instruction Manual

Thank You and Congratulations on selecting a La Crosse Technology Wireless

Weather Station! We are positive you will enjoy the benefits of accurate weather

readings and the precise, radio-controlled time information that our instruments

offer. La Crosse Technology introduced radio controlled clocks to the US market in

1991, and continues to be on the cutting-edge of this technology in America.

This manual will guide you step-by-step through setting up your La Crosse

Technology device. Use this manual to become familiar with your wireless weather

station and save it for future reference

FEATURES:

The Weather clock

12 or 24 Hour

Radio

Moon Phase

and

Sun Rise/Set

& Sun

Duration for

99 Cities

Indoo

Temperature

and Humidity

Advanced Forecast

Icon Display

Outdoor Temperature

FEATURES:

•WWVB Radio-controlled time with manual setting option

•Time reception ON/OFF (user selectable)

•12/24-hour time display

•Automatic daylight saving time (DST) updating

•DST ON/OFF (daylight saving time)

•Time zone option ±12 hours

•Year, month, date, weekday calendar display

•Crescendo alarm with snooze function

•Advanced Weather Forecast Icons with 15 combinations of weather icons

•Weather tendency indicator

•Temperature display with MIN/MAX records and time and date of reception

•Indoor and outdoor temperature display in ºF or ºC

•Indoor humidity data display as RH% with MIN/MAX records

•Can receive up to 3 remote temperature/humidity sensors

•Sun rise and sun set for 99 selected US and Canada cities

•Moon phase

•LCD contrast selectable

•LED backlight

•Low battery indicator

•Wall hanging or table standing

The Wireless Temperature Sensor (TX6U)

•Wireless transmission of

outdoor temperature to your

wireless weather station by

433 MHz

•Rain proof casing

•Wall mounting case

TO INSTALL AND REPLACE BATTERIES IN THE WIRELESS

TEMPERATURE SENSOR

The wireless temperature sensor uses 2 “AA” Alkaline Batteries. To

install and replace the batteries, please follow the steps below:

1. Remove the battery cover.

2. Insert the batteries, observing the correct polarity (see

marking).

3. Replace the battery cover on the unit.

Wireless

Temperature Sensor

Mounting Case

Note: In the event of changing batteries in any of the units, all units need to be reset by

following the set-up procedures. This is due to a random security code assigned by the

wireless temperature sensor at start-up. This code must be received and stored by the

wireless weather station in the first 3 minutes of power being supplied to the wireless

temperature sensor.

TO INSTALL AND REPLACE BATTERIES IN THE WIRELESS WEATHER

STATION

The wireless weather station uses 2 “AA” Alkaline Batteries. To install and replace the

batteries, please follow the steps below:

1. Push down on the top center of the

battery cover and pull away from the

unit to remove the cover.

2. Insert batteries observing the correct

polarity (see marking).

3. Replace compartment cover.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to ensure

optimum accuracy of these units.

Please participate in the preservation of the environment. Return

used batteries to an authorized depot.

SETTING UP

1. First, insert the batteries into the wireless temperature sensor (see “To install and

replace batteries in the wireless temperature sensor”)

2. Within 4 minutes of activating the wireless temperature sensor, insert the batteries

into the wireless weather station (see “To install and replace batteries in the

wireless weather station”). Once the batteries are in place, all segments of the

LCD will light up briefly and a short signal tone will sound. If the indoor

temperature and indoor humidity are not displayed after 15 seconds, remove the

batteries and wait for at least 3 minutes before reinserting them. Once the indoor

data is displayed proceed to step 3.

3. After inserting the batteries into the wireless temperature sensor, the wireless

weather station will start receiving data from the temperature sensor. The outdoor

temperature should then be displayed on the wireless weather station. If this does

not happen after 3 minutes, the batteries will need to be removed from both units

and reset from step 1.

4. The wireless weather station can receive up to 3 temperature sensors. If you have

purchased additional temperature sensors, repeat from step 1 for all extra

temperature sensors. However, ensure that you leave 10 seconds in between the

reception of the last temperature sensor and the set-up of the following

temperature sensor. The wireless weather station will number the temperature

sensors in the order of set-up, i.e. the first temperature sensor will have the

temperature displayed with the number 1 against it and so on.

5. With less than 3 temperature sensors received, the wireless weather station will try

to pick up the remaining one in approximately another 3 minutes. If 3 temperature

sensors are received, the wireless weather station will stop further reception.

6. Once the outdoor temperature has been received and displayed on the wireless

weather station, the WWVB time code reception is automatically started. This

takes typically between 6-8 minutes in good conditions.

7. If after 10 minutes, the WWVB time has not been received, use the SET key to

manually enter a time initially. The clock will automatically attempt to receive the

WWVB time from 12:00 to 6:00 a.m. for a successful reception. When WWVB

reception signal is successful, the received time will override the manually set

time. The date is also updated with the received time. The next reception attempt

will occur on the following day. (Please refer to notes on “About WWVB Radio

controlled Time” and “Manual Time Setting”).

Your wireless weather station is now operational!

RESETTING WIRELESS WEATHER STATION

The wireless weather station and the wireless temperature sensor need to be reset when

one of the following conditions occur:

•Unsuccessful 433MHz signal reception of the wireless temperature sensor.

•Malfunction of the units.

•Batteries need replacement.

In order to establish proper communication between the display and outdoor sensor it is

important that they be set up as follows:

1. Bring any units outside, inside and place all units 3-5 feet apart with nothing in-

between them.

2. Remove batteries from all units.

3. Press any of the buttons on the display at least 10 times to clear the memory.

Verify that the display is blank before proceeding.

4. Using good quality alkaline batteries, place the batteries back into the wireless

temperature sensor(s); making sure that they are installed according to the

diagrams in the battery compartment.

5. Taking care not to press any buttons, re-install the batteries in the weather station

according to the diagram in the battery compartment.

6. Do not press any buttons for at least 15 minutes after installing the batteries.

(This is to let them establish a good connection.)

ABOUT WWVB RADIO CONTROLLED TIME

The NIST (National Institute of Standards and Technology—Time and Frequency

Division) WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact

time signal continuously throughout the United States at 60 kHz. The signal can be

received up to 2,000 miles away through the internal antenna in the weather projection

station. However, due to the nature of the Earth’s Ionosphere, reception is very limited

during daylight hours. The wireless weather station will search for a signal every night

when reception is best.

The WWVB radio station receives the time data from the NIST Atomic clock in Boulder,

Colorado. A team of atomic physicists is continually measuring every second, of every

day, to an accuracy of ten billionths of a second per day. These physicists have created

an international standard, measuring a second as 9,192,631,770 vibrations of a Cesium-

133 atom in a vacuum. For more detail, visit http://www.boulder.nist.gov/timefreq.htm. To

listen to the NIST time, call (303)499-7111. This number will connect you to an

automated time, announced at the top of the minute in “Coordinated Universal Time”,

which is also known as Greenwich Mean Time (GMT). This time does not follow Daylight

Saving Time changes. After the top of the minute, a tone will sound for every second. It is

possible that your wireless weather station may not be exactly on the second due to the

variance in the quartz. However, the clock will adjust the quartz timing over the course of

several days to be very accurate; under 0.10 seconds per day.

FUNCTION KEYS:

Weather clock:

The Weather clock has five easy to use function keys.

SET ke

MIN/

MAX ke

LM key

CH/ + key

SNOOZE/ SUN key

Inhaltsverzeichnis

Andere La Crosse Technology Wetterstation Handbücher

La Crosse Technology

La Crosse Technology WS-3610-CH Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2810U-IT Technisches Datenblatt

La Crosse Technology

La Crosse Technology TX141TH-B Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7078UF Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1415BWV2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology S74177 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-2816U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7013U Bedienungsanleitung

La Crosse Technology

La Crosse Technology S77925V2 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7097U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9118U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308A-146 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7042TWC Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8120U-IT Installationsanleitung

La Crosse Technology

La Crosse Technology TX2000 Discovery Bedienungsanleitung

La Crosse Technology

La Crosse Technology V51 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9620U-IT Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7047U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-7032U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9520U Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9013U Bedienungsanleitung

La Crosse Technology

La Crosse Technology 308-1414M Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS7059 Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-9115TWC Bedienungsanleitung

Beliebte Wetterstation Handbücher anderer Marken

Auriol

Auriol AHFL 433 A1 Bedienungsanleitung

Hyundai

Hyundai WS 2202 Bedienungsanleitung

NexSens

NexSens G2-HYDROMET Bedienungsanleitung

IROX

IROX HBVR761 UV-X Bedienungsanleitung

ADE

ADE WS 1711 Bedienungsanleitung

Auriol

Auriol z29592 Bedienungsanleitung

Auriol

Auriol 296289 Bedienungsanleitung

Hyundai

Hyundai WS 2266 Bedienungsanleitung

Ventus

Ventus W177 Bedienungsanleitung

National Geographic

National Geographic VA Colour RC Bedienungsanleitung

Levenhuk

Levenhuk Discovery Report WA40 Bedienungsanleitung

Instant Transmission

Instant Transmission MA 10410 Bedienungsanleitung

Lutron Electronics

Lutron Electronics PHB-318 Bedienungsanleitung

WAREMA

WAREMA EWFS Weather station eco Bedienungsanleitung

TFA

TFA 30.3013.IT Bedienungsanleitung

Oregon Scientific

Oregon Scientific RMR966PA Bedienungsanleitung

Alecto

Alecto WS-1200 Bedienungsanleitung

Oregon Scientific

Oregon Scientific Alizé BAR266 Bedienungsanleitung