Lippert CURT 45937 Bedienungsanleitung

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •45937-INS-RA •08/09/2022 •ECN9781 •PAGE 1

Maintenance

Mild automotive detergent may be used to

clean the product. Do not use dish detergent,

abrasive cleaners, abrasive pads, wire

brushes or other similar products that

may damage the ﬁnish.

Product Registration and Warranty

CURT stands behind our products with industry-leading warranties. To get copies of the product

warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys

Weight Capacity

Gross trailer weight (GTW) 20,000 lbs.

Tongue weight (TW) 2,000 lbs.

INSTALLATION MANUAL 45937

Tools Required

None

Product Photo

Parts List

Item Qty Description

1 1 Adjustable shank

2 1 Dual ball

3 2 Pin

4 1 Clip

Hitch pin and clip not included

Level of Difﬁculty

Easy

WARNING

Never exceed the vehicle manufacturer's recommended towing capacity. The ratings of

the mount system are intended to represent the capability of the product and in no way

reflect the ratings or capacity of the towing system it is being used with. The consumer

or operator are strongly advised to learn the ratings of the various components of the

towing system and never exceed the limits of the lowest rated component being used.

Use of any pin other than that of the mount system manufacturer

could be a serious safety hazard and will void the warranty.

Never hook up trailer safety chains to the mount system. Ensure the safety

chains operate freely around the mount system and do not become entangled.

NOTICE

Before you begin installation, read all instructions thoroughly.

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •45937-INS-RA •08/09/2022 •ECN9781 •PAGE 2

Step 2 - Determine Required Ball Height

Determine the proper ball height by leveling the trailer and measuring

from the bottom of the trailer tongue to the ground, see below.

Find the hole closest to that measurement on the adjustable shank (#1).

The trailer ball platform (#2) will be centered on that hole.

TrailerCoupler

Channel Mount

Level Ground

Drop

Rise

Vehicle

Receiver

Tube

BALL HEIGHT

Step 1 - Insert into the Trailer Hitch

Begin by installing the shank (#1) into the trailer hitch receiver

and secure it with a hitch pin and clip (sold separately).

ASSEMBLY & SETUP

Step 3 - Attach the Tongue

Based on the determined ball height, slide the tongue

onto the shank and align with the proper hole locations.

Angle the tongue slightly upwards and press in toward the shank.

Insert a pin (#3) into the top tongue hole first. To pin the bottom

tongue hole, apply downward force to the tongue, and slide

the second pin into place.

Note: The highest mounting position will require the bottom

pin to be installed first with the tongue angled downward.

Then, apply force upwards to install the second pin.

Secure all pins with the included clip (#4).

WARNING

The provided pins are speciﬁcally engineered for this system.

If replacement pins are needed, they must be replaced

with original factory mount pins (CURT# 45931).

Parts List

Item Qty Description

1 1 Adjustable shank

2 1 Dual ball

3 2 Pin

4 1 Clip

Hitch pin and clip not included

Andere Lippert Autozubehör Handbücher

Lippert

Lippert Ground Control 3.0 Bedienungsanleitung

Lippert

Lippert ARIES 2500207 Bedienungsanleitung

Lippert

Lippert 2000 Series Bedienungsanleitung

Lippert

Lippert TI-276 Bedienungsanleitung

Lippert

Lippert Stargazer Spirit XTR Skylight Bedienungsanleitung

Lippert

Lippert Thin Shade 806621 Montageanleitung

Lippert

Lippert LUVERNE 401720 Bedienungsanleitung

Lippert

Lippert JT's Strong Arm Montageanleitung

Lippert

Lippert RV ENTRY DOOR Bedienungsanleitung

Lippert

Lippert SolidStep Gen 2 Montageanleitung

Lippert

Lippert Tire Linc 2020106863 Montageanleitung

Lippert

Lippert 45940-85 Bedienungsanleitung

Lippert

Lippert VELA POP-UP ROOF Bedienungsanleitung

Lippert

Lippert SolidStep 4.0 Bedienungsanleitung

Lippert

Lippert Curt 18110 Bedienungsanleitung

Lippert

Lippert ARIES S224050 Bedienungsanleitung

Lippert

Lippert Vela Bedienungsanleitung

Lippert

Lippert Stargazer Spirit XTR Bedienungsanleitung

Lippert

Lippert 10570 Gebrauchsanweisung

Lippert

Lippert Level-up Bedienungsanleitung

Lippert

Lippert Sway Command 1.5 Bedienungsanleitung

Lippert

Lippert Curt 18415 Bedienungsanleitung

Lippert

Lippert 2021000090 Montageanleitung

Lippert

Lippert Tire Linc Montageanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung