Lippert 2000 Series Bedienungsanleitung

Rev: 06.02.2023 Page 1 CCD-0007406

REPAIRING A SCRATCH ON A BLACK WINDOW

FRAME (SERIES 2000, 8600, 8800 AND 9000)

TI-459

WINDOWS

Purpose

This document outlines how to repair a scratch on black window frame for series 2000, 8600,

8800, and 9000.

Safety

Read and understand all instructions before attempting procedure. Adhere to all safety labels.

Preparation

1. If window is on a unit, make sure the unit is parked and powered off.

2. Use a soft cloth and rubbing alcohol to clean the damaged area of debris.

3. Tape off around the area to avoid over spray if using spray paint.

Chemical products such as spray paint have health and environmental hazards. To avoid serious

personal injury and death, follow the instructions on the container and read all warning labels.

The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury

and/or product or property damage if not safely adhered to and within the parameters set forth in

this manual.

Always wear eye protection when performing service, maintenance or installation procedures. Other

safety equipment to consider would be gloves and possibly a full face shield, depending on the

nature of the task.

Resources Required

• Rubbing alcohol

• Sandpaper, 180 grit or finer (depending on

severity of the damage)

• Orbital sander (if desired)

• Microfiber cloth

• Masking tape

• Black felt tip paint marker*

• Black automotive grade spray paint*

NOTE: For best color consistency of the original product the following black paints are recommended:

• 348444 - Forney Brand Black Paint Marker 0230180

• 348997 - SEM 39143 Trim Black Aerosol

NOTE: Color may very slightly, at application or exposure to sun exposure or weather.

Rev: 06.02.2023 Page 2 CCD-0007406

TI-459

WINDOWS

REPAIRING A SCRATCH ON A BLACK WINDOW

FRAME (SERIES 2000, 8600, 8800 AND 9000)

As a supplier of a broad array of highly-engineered components in the recreation and transportation product markets, safety, education and customer satisfaction are

our primary concerns. Should you have any questions, please do not hesitate to contact us at 432-LIPPERT (432-547-7378) or by email at

[email protected]

Self-help tips, technical documents, product videos and a training class schedule are available at

lippert.com

or by downloading the LippertNOW app.

Procedure 1: For Small Applications (Dots or Ding Blemishes)

If repairing a small spot, like a dot or a ding type of damage:

1. Use black felt tip paint marker to dab paint onto scratch making sure paint completely covers scratch

and appears even.

2. Allow to completely dry; ideally a 24 to 48 hour cure time.

3. Repeat as needed.

Procedure 2: For Larger Applications (Long or Deep Scratches)

If repairing a scratch:

1. Use sandpaper 180 grit or finer to gently buff out the scratch until desired finish is achieved.

NOTE: The surface should be smooth and blend into the unaffected area to avoid creating a larger blemish.

NOTE: Scratch is removed by sanding it out completely. Paint only will not fill the scratch adequately.

2. Wipe away all debris from sanding.

3. With the scratch buffed out and the area free of debris, apply black spray paint evenly over the scratch.

4. Allow paint 24 to 48 hours to cure.

5. Repeat as needed. Damage may take several applications of paint to repair.

Using a larger grit sandpaper or sanding the scratch too firmly could cause greater damage

that may not be repairable.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lippert Autozubehör Handbücher

Lippert

Lippert Power Steps 2.0 Bedienungsanleitung

Lippert

Lippert Tire Linc 2020106863 Montageanleitung

Lippert

Lippert 10570 Gebrauchsanweisung

Lippert

Lippert Curt 18150 Bedienungsanleitung

Lippert

Lippert Power Step 2.0 Bedienungsanleitung

Lippert

Lippert LUVERNE 401720 Bedienungsanleitung

Lippert

Lippert Stargazer Spirit XTR Skylight Bedienungsanleitung

Lippert

Lippert LatchXtend RV Door Handle Bedienungsanleitung

Lippert

Lippert Thin Shade 806621 Montageanleitung

Lippert

Lippert Curt 18110 Bedienungsanleitung

Lippert

Lippert Ground Control 3.0 Bedienungsanleitung

Lippert

Lippert Curt 18415 Bedienungsanleitung

Lippert

Lippert Vela Pop Up Gebrauchs- und Pflegehandbuch

Lippert

Lippert Vela Pop Up Bedienungsanleitung

Lippert

Lippert Stargazer Nano Wide Skylight Bedienungsanleitung

Lippert

Lippert SolidStep Gen 2 Montageanleitung

Lippert

Lippert Project 2000 Sliding Step Bedienungsanleitung

Lippert

Lippert Kwikee Step Well Cover Bedienungsanleitung

Lippert

Lippert SMART BED UNIVERSAL KIT Bedienungsanleitung

Lippert

Lippert ARIES 2500207 Bedienungsanleitung

Lippert

Lippert ARIES S224050 Bedienungsanleitung

Lippert

Lippert Curt 13496 Bedienungsanleitung

Lippert

Lippert 2021000090 Montageanleitung

Lippert

Lippert JT's Strong Arm Montageanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung