Lippert SolidStep 4.0 Bedienungsanleitung

SolidStep®4.0

OWNER'S MANUAL

Rev: 10.04.23 Page 2 CCD-0007740

TABLE OF CONTENTS

Introduction 2

Safety 2

Operation 4

Release Steps 4

Leg Extension Adjustment 5

Securing and Storing the Steps 5

Adjusting the Transport Lock 6

Notes 7

Introduction

The SolidStep® 4.0 is a trailer entry step assembly that can be mounted to the side of any trailer, providing

an ease of entry, regardless of level ground.

NOTE: Images used in this document are for reference only when assembling, installing and/or operating

this product. Actual appearance of provided and/or purchased parts and assemblies may differ.

Additional information about this product can be obtained from lci1.com/support or by downloading

the free LippertNOW app. The app is available on Apple App Store® for iPhone® and iPad® and also on

Google Play™ for Android™ users.

Apple App Store®, iPhone®, and iPad® are registered trademarks of Apple Inc.

Google Play™ and Android™ are trademarks of Google Inc.

For information on the assembly or individual components of this product, please visit:

https://support.lci1.com/steps-support-solidstep.

The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause

death or serious personal injury if not performed safely and within the parameters set forth in this

manual.

Failure to follow instructions provided in this manual may result in death, serious personal injury

and/or severe product and property damage, including voiding of the component warranty.

Safety

Read and understand all instructions before installing or operating this product. Adhere to all safety labels.

This manual provides general instructions. Many variables can change the circumstances of the instructions,

i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This

manual cannot begin to plot out instructions for every possibility, but provides the general instructions,

as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the

provided instructions may result in death, serious personal injury, severe product and/or property damage,

including voiding of the Lippert limited warranty.

Rev: 10.04.23 Page 3 CCD-0007740

The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury

and/or product or property damage if not safely adhered to and within the parameters set forth

in this manual

Always wear eye protection when performing service, maintenance or installation procedures.

Other safety equipment to consider would be hearing protection, gloves and possibly a full face

shield, depending on the nature of the task.

Moving parts can pinch, crush or cut. Keep clear and use caution.

No repairs should be attempted by anyone other than a qualied professional. The deployment and

retraction of the step assembly can cause injury if proper precautions are not taken. The step

assembly was designed for an operational weight rating of 400 lbs.

Rev: 10.04.23 Page 4 CCD-0007740

Operation

Moving parts can pinch, crush or cut. Keep clear and use caution.

Release Steps

1. From the stowed position (Fig. 1), disengage the transport lock (Fig. 1A) by pulling the transport lock

knob to the right.

2. Firmly grasp and pull out the vertically stored SolidStep 4.0 and rest it firmly on the ground.

3. Adjust leg extensions as needed.

Fig. 1

Rev: 10.04.23 Page 5 CCD-0007740

Leg Extension Adjustment

The leg extension is secured with a spring-loaded catch pawl (Fig. 2A). Adjustments can be made to the leg

extensions in 1" increments by extending or retracting the inner leg for the optimal angle and to adjust for

the ground surface angle.

1. Pull the spring-loaded catch pawl (Fig. 2A) up to release it from the tube and the slot

in the angle.

2. Extend or retract the inner leg (Fig. 3A) as needed so the steps are parallel to the ground and level

when extended, and unobtrusive while retracted.

3. When the leg is at the desired position, release the spring-loaded catch pawl into the tube and slot

closest to where the inner leg and tube meet to lock them (Fig. 4).

Fig. 2 Fig. 3

Fig. 4

Securing and Storing the Steps

1. Retract leg extensions. See Leg Extension Adjustment section.

2. Lift up SolidStep 4.0 to its stored position (Fig. 1) until the transport locks engage and click into place.

3. Make sure the latches (Figs. 6A and 7A) are resting against the door frame.

4. Once the transport lock has been engaged, test its functionality by shaking the step assembly to

simulate road vibration, making sure that the SolidStep 4.0 is secure.

Rev: 10.04.23 Page 6 CCD-0007740

Fig. 5

A A

Adjusting the Transport Lock

1. To verify the transport lock adjustment is working properly, the SolidStep 4.0 should be in the stored

position (Fig. 5). Make sure transport latch flanges (Figs. 5A, 6A, and 7A) are resting against the door

frame. If final adjustment is required, loosen the two bolts (Fig. 6B and Fig. 7B) on either side of the

adjustable transport lock. This allows for side-to-side adjustment in the latch mechanism.

Attempting to engage the transport lock without proper adjustment may cause damage to the door

frame or step assembly.

Fig. 6

Fig. 7

Rev: 10.04.23 Page 7 CCD-0007740

Notes

The contents of this manual are proprietary and copyright protected by Lippert. Lippert prohibits the copying or

dissemination of portions of this manual unless prior written consent from an authorized Lippert representative

has been provided. Any unauthorized use shall void any applicable warranty. The information contained in this

manual is subject to change without notice and at the sole discretion of Lippert. Revised editions are available

for free download from lippert.com.

Please recycle all obsolete materials.

For all concerns or questions, please contact Lippert

Ph: 432-LIPPERT (432-547-7378) | Web: lippert.com | Email: [email protected]

Inhaltsverzeichnis

Andere Lippert Autozubehör Handbücher

Lippert

Lippert Kwikee Step Well Cover Bedienungsanleitung

Lippert

Lippert LatchXtend RV Door Handle Bedienungsanleitung

Lippert

Lippert Ground Control 3.0 Bedienungsanleitung

Lippert

Lippert Stargazer Spirit XTR Bedienungsanleitung

Lippert

Lippert Vela Bedienungsanleitung

Lippert

Lippert Level-up Bedienungsanleitung

Lippert

Lippert OneControl Bedienungsanleitung

Lippert

Lippert TI-276 Bedienungsanleitung

Lippert

Lippert Curt 60654 Bedienungsanleitung

Lippert

Lippert VELA POP-UP ROOF Bedienungsanleitung

Lippert

Lippert FLYSCREEN N Series Bedienungsanleitung

Lippert

Lippert 2021000090 Montageanleitung

Lippert

Lippert SMART BED UNIVERSAL KIT Bedienungsanleitung

Lippert

Lippert LUVERNE 401720 Bedienungsanleitung

Lippert

Lippert Promaster Bedienungsanleitung

Lippert

Lippert ARIES 2500207 Bedienungsanleitung

Lippert

Lippert Power Step 2.0 Bedienungsanleitung

Lippert

Lippert Stargazer Nano Wide Skylight Bedienungsanleitung

Lippert

Lippert Vela Pop Up Gebrauchs- und Pflegehandbuch

Lippert

Lippert Project 2000 Sliding Step Bedienungsanleitung

Lippert

Lippert CURT 45937 Bedienungsanleitung

Lippert

Lippert Curt 18415 Bedienungsanleitung

Lippert

Lippert SolidStep Gen 2 Montageanleitung

Lippert

Lippert JT's Strong Arm Montageanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung