LUCCI NORDIC Series Service-Handbuch

NORDIC - V1.0 - MUTIL

CEILING FAN MANUAL

INSTALLATION

OPERATION

MAINTENANCE

WARRANTY INFORMATION

LUCCI

NORDIC SERIES

CEILING FANS

CAUTION

READ INSTRUCTIONS CAREFULLY FOR SAFE

INSTALLATION AND FAN OPERATION.

Installation Instruction Manual .......................................................................................... 3

D Installationsanleitung ........................................................................................................11

F Guide d’installation............................................................................................................19

E Manual de instrucciones de instalación.............................................................................27

I Manuale delle istruzioni di installazione............................................................................35

Installatiehandleiding.........................................................................................................43

CONTENTS

Congratulations on purchasing this quality Lucci product. To ensure correct function and

safety, please read and save all instructions carefully before using the product.

The information contained in the following pages has been prepared to ensure you of

trouble-free operation of your Ceiling Fan .

1. This appliance is NOT intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety.

2. An all-pole disconnection switch must be incorporated into the fixed wiring, in accordance

with local wiring rules.

3. Do not dispose of electrical appliances as unsorted municipal waste, use separate

collection facilities. Contact your local government for information regarding the collection

systems available. If electrical appliances are disposed of in landfills or dumps, hazardous

substances can leak into the groundwater and get into the food chain, damaging your

health and well-being.

4. The structure to which the fan is to be mounted must be capable of supporting a weight of

30kg.

5. The fan should be mounted so that the blades are at least 2.3 meters above the floor in

Europe

6. The fan should be mounted so that the blades are at least 2.1 meters above the floor in

Australia

7. The fan is designed for indoor use only. Mounting the fan in a situation where it is subject

to water or moisture is dangerous.

8. Only an authorized electrician should execute the installation.

CONGRATULATIONS ON YOUR PURCHASE

SAFETY PRECAUTIONS

Unpack the fan and carefully identify the parts. Please refer to Fig 1.

1. Hanger bracket x 1 9. Pendant for fan x 1

2. Fan motor assembly x 1 10. Pendant for light x 1

3. Motor housing x 1 11. Balance kit x 1 set

4. Blade holder x 4 12. Wooden screws x 2

5. Blades x 4 13. Flat washers x 2

6. Lamp base x 1 14. Spring washers x 2

7. Glass x 1 15. Blade mounting screws x 13

8. Wall plugs for screws x 2 16. Motor screws x 9

BEFORE INSTALLATION

Fig. 1

The ceiling fan must be installed in a location so that the blades are 300mm spacing from the tip of

the blade to the nearest objects or walls.

Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at

least 30KG, with two long screws provided. Ensure at least 30mm of the screw is threaded into the

support.

NOTE: The bracket screws provided are for use with wooden structures only. For structures

other than wood, the appropriate screw type MUST be used.

Remove the screws from mounting bracket (Fig.2) and motor bracket. Fig.3

Lift fan assembly to mounting bracket(1) and let the narrow end of motor bracket (2) go through

the slot of mounting bracket (3).Fig.4

INSTALLING THE MOUNTING BRACKET

Fig. 2

Fig. 3 Fig. 4

INSTALLING THE FAN

Refer to the wiring diagram provided for Electrical Connection/installation. Fig.8

After completing the electrical wiring at the mounting bracket terminal and connecting the fan

motor and fixed wiring via the 4-ports quick connectors. Fig.5.

Fix the motor bracket to mounting bracket with 3 screws. Fig.6



Cover the mounting bracket with the motor housing. Ensure all electrical wirings are tucked inside

the slot of motor bracket and that they are not damaged during this step, and secure with screws.

Fig. 7

WARNING: FOR YOUR SAFETY ALL ELECTRICAL CONNECTIONS MUST BE UNDERTAKEN BY

A LICENSED ELECTRICIAN.

NOTE: AN ADDITIONAL ALL POLE DISCONNECTION SWITCH MUST BE INCLUDED IN THE

FIXED WIRING.

ELECTRICAL WIRING DIAGRAM

Fig. 6 Fig. 7

Fig. 5

Blade attachment

1. Assemble the blades (3) & holders (1) using the screw (2 ). (Fig. 9)

2. Secure the blade holder on the motor by using two motor screws (4) with washers to tighten it

ensuring they are tightened simultaneously. Once completed, repeat the process on remaining

blades.

1. Remove the 3 light kit screws (6, Fig.10) from light base.

2. Insert the pull chain (3, Fig.10) through the holes of light kit (4, Fig.10).

3. Connect the fan and light pendant (5, Fig.10) to pull chain.

4. Connect the quick connector (2, Fig.10), and then push them into the switch housing (1, Fig.10).

5. Attached the light kit to light base and align the screw holes, then secure light kit with 3 light kit

screws.

6. Insert and secure the light bulbs into the E27 sockets. (Bulb not included).

7. Carefully place the glass shade (2) cover over the lamp and secure it by the three spring clips (1).

Fig. 11.

BLADE INSTALLATION

LIGHT KIT INSTALLATION

Fig. 8

Fig.9

FAN SPEED CONTROL

Your ceiling fan is controlled via the fan speed pull chain switch.(1,

Fig.12)

To change speeds, pull the fan speed switch 4 times, and the fan

will start running at:

High speed --- Medium speed ---- Low speed--- Off

LIGHT ON/OFF CONTROL

Your ceiling fan is controlled via the light pull chain switch. (2,

Fig.12)

To turn on/off the light, pull the light switch.

USING YOUR FAN WITH REMOTE

IMPORTANT NOTE: The pull chain light switch must be set to the 'on' position and the pull

chain fan switch must be set on high speed when you are using your ceiling fan with a remote.

USING YOUR CEILING FAN

Fig.10

Fig.11

Fig. 12

REVERSING SWITCH

Your ceiling can operate either summer or winter mode.

SUMMER Mode: The reverse switch shall be in the “down” (SUMMER) position to make the fan rotate

in an anticlockwise direction. The airflow will be directed downwards, for cooling in summer.

WINTER Mode: The reverse switch shall be in the “up” (WINTER) position to make the fan rotate in a

clockwise direction. The airflow will be directed upwards assisting in the circulation of warm air, for

energy conservation in winter.

WOBBLE:

NOTE: CEILING FANS TEND TO MOVE DURING OPERATION DUE TO THE FACT THAT THEY

ARE MOUNTED ON A RUBBER GROMMET. IF THE FAN WAS MOUNTED RIGIDLY TO THE

CEILING IT WOULD CAUSE EXCESSIVE VIBRATION. MOVEMENT OF A FEW CENTIMETRES IS

QUITE ACCEPTABLE AND DOES NOT SUGGEST ANY PROBLEM.

TO REDUCE THE FAN WOBBLE: PLEASE CHECK THAT ALL SCREWS WHICH FIX THE

MOUNTING BRACKET AND DOWN ROD ARE SECURE.

BALANCING KIT: A balancing kit is provided to balance the ceiling fan on initial installation. Please

refer to the instruction on how to use the balancing kit. The balancing kit can be used to assist

re-balancing should the ceiling fan become un-balanced again. Store your balancing kit away after

installation for future use if required.

NOISE:

When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations

and frequency signals superimposed in the electricity for off-peak hot water control, may cause a

Fig. 13

AFTER INSTALLATION

change in fan motor noise. This is normal. Please allow a 24-hour “breaking -in” period, most noises

associated with a new fan disappear during the time. The manufacturer’s warranty covers actual faults

that may develop and NOT minor complaints such as hearing the motor run – All electric motors are

audible to some extent.

CARE AND CLEANING

Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free

cloth to avoid scratching the paint finish. Please turn off electricity power when you do so.

Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and

create the possibility of an electrical shock.

The motor has a permanently lubricated ball bearing. There is no need to oil

NOTE: Always turn off the power at the mains switch before attempting to clean your fan.

Ceiling Fan model Rated Voltage

Rated Power

(motor) Rated Power

(lamp)

SKU#512106 (LD-512106) 230VAC 60W 1X MAX. 42W halogen globe or

1X MAX. 20W CFL Spiral

SKU#512107 (LD-512107) 230VAC 60W 1X MAX. 42W halogen globe or

1X MAX. 20W CFL Spiral

SKU#512108 (LD-512108) 230VAC 60W 1X MAX. 42W halogen globe or

1X MAX. 20W CFL Spiral

IN AUSTRALIA / NEW ZEALAND CUSTOMER – Please refer to the separated WARRANTY

STATEMENT.

IN EUROPE – If you are a European Customer Please contact the retail outlet where the fan was

purchase for warranty service.

TECHNICAL INFORMATION

WARRANTY INFORMATION

Inhaltsverzeichnis

Sprachen:

Andere LUCCI Lüfter Handbücher

LUCCI

LUCCI AIRFUSION CAROLINA Bedienungsanleitung

LUCCI

LUCCI AIRFUSION QUEST II Leitfaden

LUCCI

LUCCI AIRFUSION CLIMATE II LD52WH Bedienungsanleitung

LUCCI

LUCCI FIJIAN II Series Service-Handbuch

LUCCI

LUCCI AIRFUSION BANKSIA 4675856 Installationsanleitung

LUCCI

LUCCI Airfusion Aria Service-Handbuch

LUCCI

LUCCI NAUTICA Bedienungsanleitung

LUCCI

LUCCI WHITEHAVEN Betriebsanleitung

LUCCI

LUCCI AIRFUSION QUEST II Bedienungsanleitung

LUCCI

LUCCI Viceroy Leitfaden

LUCCI

LUCCI Airfusion Penta Betriebsanleitung

LUCCI

LUCCI AIRFUSION QUEST II Betriebsanleitung

LUCCI

LUCCI Airfusion Aria Bedienungsanleitung

LUCCI

LUCCI 200280 Bedienungsanleitung

LUCCI

LUCCI ATLANTA Bedienungsanleitung

LUCCI

LUCCI FUTURA ECO SERIES Bedienungsanleitung

LUCCI

LUCCI AIRFUSION BREEZE Service-Handbuch

LUCCI

LUCCI THERMALITE 3 IN 1 Service-Handbuch

LUCCI

LUCCI BREEZER SERIES Bedienungsanleitung

LUCCI

LUCCI FUTURA ECO Montage- und Bedienungsanleitung

LUCCI

LUCCI MXSQ8PW Installationsanleitung

LUCCI

LUCCI Futura 48 inch Bedienungsanleitung

LUCCI

LUCCI AIRFUSION BANKSIA Bedienungsanleitung

LUCCI

LUCCI AIRFUSION RESORT Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung