Mercia Garden Products 01GRO1006DD-V2 Gebrauchsanweisung

P 1

01GRO1006DD-V2

10X6 GROUNDSMAN

2mm Drill bit

x2 Winter = High Moisture = Expansion

Summer = Low Moisture = Contraction

All building’s should be

erected by two adults

For ease of assembly, you

MUST pilot drill all screw

holes and ensure all screw

heads are countersunk.

For assistance please contact customer care on: 01636 880514

Mercia Garden Products Limited,

Sutton On Trent,

Newark,

Nottinghamshire,

NG23 6QN

www.merciagardenproducts.co.uk

CAUTION

Every eort has been made during the

manufacturing process to eliminate the

prospect of splinters on rough surfaces of the

timber. You are strongly advised to wear gloves

when working with or handling rough sawn

timber.

**Protim Aquatan T5 (621)**

Your building has been treated with Aquatan.

Aquatan is a water-based concentrate which is diluted with water, the building as been treated by the correct

application of Aquatan solution and then allowed to dry.

Aquatan is a decorative nish to colour the wood, which is applied industrially to timber fence panels and

garden buildings.

Aquatan undiluted contains: boric acid, sodium hydroxide 32% solution, aqueos mixture of sodium dioctyl

sulphosuccinate and alcohols: 2, 4, 6-trichlorophenol.

Please retain product label and instructions for future reference

General Instructions

BEFORE YOU START PLEASE READ INSTRUCTIONS CAREFULLY

- Check the pack and make sure you have all the parts listed.

- When you are ready to start, make sure you have the right tools at hand (not supplied)

including a Phillips screwdriver, Stanley knife, wood saw, step ladder and drill with 2mm

bit.

- Ensure there is plenty of space and a clean dry area for assembly.

TIMBER

As with all natural materials, timber can be aected during various weather conditions.

For the duration of heavy or extended periods of rain, swelling of the wood panels may

occur. Warping of the wood may also occur during excessive dry spells due to an interior

moisture loss. Unfortunately, these processes cannot be avoided but can be helped. It is

suggested that the outdoor building is sprayed with water during extended periods of

warm sunshine and sheltered as much as possible during rain or snow.

Our buildings are pre treated with a water based treatment**; this only helps to protect

the product during transit and for upto 3 months against mould. To validate your

guarantee and ensure longevity of the product, it is ESSENTIAL the building is treated

with a wood preserver within the rst three months of assembly and thereafter in

accordance with the manufactures recommendations. Care must be taken to ensure

the product is placed on a suitable base.

BUILDING A BASE

When thinking about where the building and base is going to be constructed:

Ensure that there will be access to all sides for maintenance work and annual

treatment.

Ensure the base is level and is built on rm ground, to prevent distortion. Refer to

diagrams for the base dimensions, The base should be slightly smaller than the external

measurement of the building, i.e. The cladding should overlap the base, creating a run

o for water. It is also recommended that the oor be at least 25mm above the

surrounding ground level to avoid ooding.

TYPES OF BASE

- Concrete 75mm laid on top of 75mm hard-core.

- Slabs laid on 50mm of sharp sand.

Whilst all products manufactured are made to the highest standards of Safety and in

the case of childrens products independently tested to EN71 level, we cannot accept

responsibility for your safety whilst erecting or using this product.

Refer to the instruction pages for your specic product code

12345

Door Gable

01GRO1006DD-V2DG

Window Gable

01GRO1006DD-V2WG

Window Side QTY 2

01GRO1006DD-V2WS

Plain Side QTY 2

01GRO1006DD-V2PS

Floor QTY 2

01GRO1006-V2F

6 7

Master Door

01GRO1006-V2MD

Slave Door

01GRO1006DD-V2SD

Roof Panel QTY 4

01GRO1006DD-V2RP

Opening Window

QTY 2 - 01OW-V1

Truss Support - 345mm

F4444-345mm

Fascia - 1120mm QTY 4

S1295-1120mm

Window Trim - 1000mm QTY 2

S1240-1000mm

Cover Trim - 1624mm QTY 6

S1256-1624mm

Door Trim - 1179mm

F1245-1179mm

Door Trim - 1732mm QTY 2

S145-1732mm

Fascia Block - 120mm QTY 4

F2744-120mm

Finial QTY 2

Butt Hinge QTY 4

PI-07-0066

T-Hinge QTY 6

PI-07-0021

Rim Lock

PI-07-0019

Tower Bolt

PI-07-0030

Casement Stay QTY 2

PI-07-0005

Pre drill

hole

30mm

screw

40mm

screw

Step 1

Remove transportation blocks

from the bottom of each panel

before assembling the building.

50mm Screw x90

40mm Screw x40

Felt Tacks x180

20mm Screw x14

30mm Screw x104

16mm Screw x14

Bolt Block 120mm

F2744-120mm

Nail Bag

Truss Support - 902mm QTY 2

F2744-902mm

Truss Support - 1065mm QTY 2

F2744-1065mm

Truss Block - 140mm QTY 2

F2744-140mm

P 2

01GRO1006DD-V2

Overall Dimensions:

Length = 3147mm

Width = 1969mm

Height = 2094mm

Base Dimensions:

Length = 3044mm

Width = 1851mm

Please retain product label and instructions for future reference

Before assembly

please make sure you have a

suitable base ready to erect your

building

MADE IN GREAT BRITAIN Pre-Assembly

Fix the door strips ontop the

front of the door gable using

4x40mm screws per strip.

The frames should sit 13mm

from the door aperture.

Attach the doors to the

building using the

T-hinges and 7x30mm

screws per hinge.

42x30mm Screws

12x40mm Screws

13mm

*Tip: build the roof support

“Step 5” by lining the

components against the

back of the door gable.

21 22 23 24 25 26

Step 2

Place the oor panels

onto a rm & level base,

ensure the base has

suitable drainage free

from areas where

standing water can

collect.

Secure the oors

together using 10x50mm

screws xing in an

alternating pattern.

10x50mm Screws

Pre drill

hole

50mm

screw

Step 3

Place the plain

gable and the

window panels

onto the oor

and secure using

6x50mm screws.

bbb

bDO NOT secure

the building to

the oor until the

roof is xed in

place.

6x50mm Screws

Pre drill

hole

50mm

screw

* Window panels can

be placed on either

side of the building.

Using the same method outlined

in Step 3, x the plain sides & the

door gable using 12x50mm

screws.

DO NOT secure the building to

the oor until the roof is

xed in place.

Step 4

12x50mm Screws

Pre drill

hole

50mm

screw

Pre drill

hole

40mm

screw

*Secure the truss support 43mm from the top edge.

Fix the last two truss supports

to the assembly with 2x40mm

screws per side.

4x40mm Screws

Pre drill

hole

40mm

screw

20 20

Attach the truss blocks to each side

of the support with 1x60mm

screw per block.

2x50mm Screws

Pre drill

hole

50mm

screw

For assistance please contact customer care on: 01636 880514

Mercia Garden Products Limited,

Sutton On Trent,

Newark,

Nottinghamshire,

NG23 6QN

www.merciagardenproducts.co.uk

P 3

Please retain product label and instructions for future reference

Step 5

Secure the rst 2 truss

supports together with

4x40mm screws as shown

in the illustration.

4x40mm Screws

Step 7

Fix the roof panels to the

building. Ensure the framing

ts into the slot at the top

of the gables.

Secure in place using 7x30mm

screws per roof panel.

28x30mm Screws

Pre drill

hole

30mm

screw

bbbb

Step 6

Now That the roof is xed

secure the building to the

oor with 24x50mm screws.

* Ensure to screw in alignment

with the oor bearers.

24x50mm Screws

Pre drill

hole

50mm

screw

Felt

tacks

Pre drill

hole

50mm

screw

P 4

Please retain product label and instructions for future reference

Step 7

Cut the felt into 3 sheets and

lay onto the roof as shown in

the diagram ensuring there is

50mm overhang around the

sides.

Fix using 180x felt tacks at

100mm intervals.

180x Felt Tacks

Step 6

Fix the assembled truss inbetween

the panels, approximately half

way between the gables, and secure

using 4x50mm screws.

4x50mm screws

HANDLE

WITH CARE

Pre drill

hole

40mm

screw

Pre drill

hole

30mm

screw

Pre drill

hole

30mm

screw

Step 11

Attach the bolt block to the

top of the slave door with

2x30mm screws.

Align the tower bolts onto

the block and x using

6x30mm screws.

8x30mm Screws

Pre drill

hole

30mm

screw P 5

Please retain product label and instructions for future reference

Rim lock

Flat head

Grub Screw

2x30mm screw

Screws provided with lock

Do not over tighten the screws

Step 8

Attach the cover trims to the

building using 3x40mm

screws per strip.

18x40mm Screws

Step 10

Rim Lock Fixing

Fig 1. (Internal view)

Place the lock onto the the

internal horizontal framing

ensuring to align with the

pre-drilled holes before

xing. Line the lock keep

with the lock and x using

the screws provided.

DO NOT over tighten the

screws, otherwise the

locking mechanism will

not work.

Fig 2.

Place the door handle bar

through the lock as shown

in the diagram, x the door

handle onto the bar with

the at headed grub screw.

Fig 3. (External view)

Fit the door handle cover over

the bar and x with 2x30mm

screws provided. Attach the

door handle onto the bar with

the at headed grub screw.

2x30mm Screws

Step 9

Fix the fascia blocks to roof using

2x30mm screws per block.

Ensure the blocks are ush to the

edge of the roof.

Attach the fascia’s and nial’s to

the front and back of the building

with 12x30mm screws.

20x30mm Screws

Opening Window

Fixed Window

Pre drill

hole

16mm

screw

30mm

screw

Pre drill

hole

20mm

screw

AFTER TREATMENT:

score around protective

cover on glazing and

carefuly peel

covering back

P 6

Please retain product label and instructions for future reference

It is ESSENTIAL that you apply wood

treatment immediately after the building

has been assembled.

Step 12

Opening Window

Place the window strip 11mm

over the window opening and

x in place with 3x30mm

screws per strip.

Ste

6x30mm Screws

If you would like the windows

to be opening use the butt

hinges to attach the window to

the strip. Fix the hinges to the

strip using 30mm screws and

16mm to t the hinges to the

window frame.

12x16mm Screws

12x30mm Screws

Fixed Window

If you would like the windows

to be xed instead of

opening, secure the window

to panel using 4x30mm screws

per window.

8x30mm Screws

30mm

Screws

16mm

screws

Step 13

Fix the casement stay to the

window and then align the

xings to the window panel

framing. Ensure the casement

stay ts onto the xings when

closed before securing in

place.

12x20mm Screws

Inhaltsverzeichnis

Andere Mercia Garden Products Gartenhaus Handbücher

Mercia Garden Products

Mercia Garden Products 01DTSHAX0406SDFW-V1 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 04GREENLEAN0804-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 04DTSTRDPN0804HGS-V1 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 01OSBP1006SDFW-V1 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 03DTSHPN0408DSHPB-V1 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 03TGCOR0808-V3 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 03WES0808-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03WES1008-V3 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 0634LOG209-V4 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03DTSHCV1208HGD4MW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 0628CSNE0303HGDD2SW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03DTSHPN1208FGC32TWSA-V1 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 01SHPWOR2010DDOW-V2 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03DTSHPN0806PA-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 02GARA0806-V1-PEFC Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03WES1008-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 0634RANE4535FGDD2TW1SW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 0628RANE0403HGDD2SW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01RAW2010DDOW-V3 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 0644AXNE0503HGDD2MW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03DTSHPN0806FGD1TW-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03DTSHCR0707FGD2TW-V2 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 01PTPOT0806-V1 Gebrauchsanweisung

Mercia Garden Products

Mercia Garden Products 03LBRO1008-V7 Bedienungsanleitung

Beliebte Gartenhaus Handbücher anderer Marken

Lemeks

Lemeks Palmako PA120-5930-6 Installationshandbuch

Rion

Rion Hobby Gardener Bedienungsanleitung

Gartenhaus-King

Gartenhaus-King Valery Bedienungsanleitung

Select

Select ISAAC E9682 Bedienungsanleitung

Palmako

Palmako Saale Bedienungsanleitung

Lemeks

Lemeks Palmako Kira EL16-3623 Installationshandbuch

Palmako

Palmako Roger FR44-5953-2 Bedienungsanleitung

Pergola kits USA

Pergola kits USA PREMIUM VINYL PAVILION Bedienungsanleitung

G21

G21 Boston 882 Bedienungsanleitung

Lemeks

Lemeks Palmako Grace PM56-4529 Installationshandbuch

Shire

Shire Salcey Bedienungsanleitung

Rutland County

Rutland County Burley 6ft Bedienungsanleitung

Palmako

Palmako Roger 27,7 Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5930-9 Installationshandbuch

Lemeks

Lemeks Palmako PM70-6436 Installationshandbuch

Lemeks

Lemeks Palmako PM56-4435 Installationshandbuch

Lemeks

Lemeks 106214 Installationshandbuch

POD

POD Camping 480 Bedienungsanleitung