MikroTik LtAP LR8 LTE kit Bedienungsanleitung

LtAP LR8 LTE kit(RBLtAP-2HnD&R11e-LTE&LR8)

Quickstart

Please f ll w these quick steps t set up y ur device:

Open the b tt m lid;

Insert the SIM card int the SIM 2 sl t (middle);

C nnect the device t the p wer s urce;

C nnect with y ur c mputer t the Mikr Tik wireless netw rk;

Openhttps://192.168.88.1in y ur web br wser t start the c nfigurati n;

The user name:adminand there is n passw rd set, by default;

Once c nnected, in the QuickSet LTE AP menu, enter y ur PIN c dehttps://mt.lv/c nfigurati n;

Upgrade the R uterOS s ftware t the latest versi nhttps://mt.lv/upgrade;

C nnect again and in theQuickSet LTE APmenu set y ur wireless netw rk passw rd;

Ch se y ur c untry n the left side f the screen, t apply c untry regulati n settings;

Secure y ur device and set a str ng passw rd.

Find y urLR Gateway ID n the label within the pr duct and register it in y ur Netw rk Server.

Extensi n sl ts and p rts

Built-in 2 GHz wireless access p int m dule, AP/stati n/bridge/p2p m des are supp rted. Onb ard

PIF antennas built-in, as well as MMCX c nnect rs f r external antennas (s ftware selectable).

Tw miniPCIe sl ts and three SIM sl ts.

Built-in GPS m dule with an external SMA c nnect r.

Gigabit Ethernet p rt, supp rting aut matic cr ss/straight cable c rrecti n (Aut MDI/X). Either

straight r cr ss ver cable can be used f r c nnecting t ther netw rk devices. The Ethernet p rt

accepts 12-30 V DC p wering fr m a passive P E inject r.

One DB9 RS232 serial p rt f r serial c ns le access. C nfigured as 115200 bit/s, 8 data bits, 1 st p

bit, n parity.

One USB 2.0 p rt.

R11e-LR8, miniPCIe card with external SMA c nnect r.

M unting

1. It is p ssible t attach the device t a wall, using the pr vided f ur screws and designed f ur h les

n the unit.

2. The p rts are pr tected with a small d r, that is held in place with tw screws. Rem ve t access

Ethernet p rts, antenna c nnect r, SIM sl ts, etc.

3. The d r has cut- ut places f r all available p rts, s y u can guide thr ugh all necessary cables,

but please nly break ut the penings that y u will use.

4. Several places f r external antennas are pr vided n the case, use an appr priate size drill, t make

them available. Be careful and measure the ch sen antenna, s that it d es n t t uch the internal

PCB b ard when installed.

The device can be used b th ind rs and utd rs. The IP rating scale f IP54.

If y u intend t m unt utd rs, please ensure that any cable penings are directed d wnwards. The

M unting directi n is indicated n the device with an arr w p inting up. Use POE inject r and

pr per gr unding. Rec mmended using Cat6 shielded cable.

Warning! This equipment sh uld be installed and perated with a minimum distance f 30 cm

between the device and y ur b dy. Operati n f this equipment in the residential envir nment c uld

cause radi interference.

The device encl sure has places where y u can drill penings f r external LTE and GPS antennas.

Use a drill t make h les that are appr priate f r the antenna cable used.

C nfigurati n

We rec mmend clicking the "Check f r updates" butt n and updating y ur R uterOS s ftware t

the latest versi n t ensure the best perf rmance and stability. R uterOS includes many

c nfigurati n pti ns in additi n t what is described in this d cument. We suggest starting here t

get y urself accust med t the p ssibilities:https://mt.lv/help. In case IP c nnecti n is n t

available, the Winb x t l (https://mt.lv/winb x) can be used t c nnect t the MAC address f the

device fr m the LAN side (all access is bl cked fr m the internet p rt by default). F r rec very

purp ses, it is p ssible t b t the device fr m a netw rk, see the secti nLtAP kit-series#Reset

butt n.

GPS

The built-in GPS m dule requires an external antenna t be used (SMA c nnect r is already

m unted behind the unit d r). Please see theLtAP kit-series#M untingsecti n n h w t rem ve

the d r.

Attentionthe GPS uses an active antenna, nly c nnect and disc nnect the antenna, when the

device is turned ff!

Supports -GPS, GLONASS, BeiDou, Galileo).

Make sure that the GPS package is installed n y ur device. Check by f ll wing c mmand /system

package print. If n t installed please d wnl ad extra packages at ur d wnl ad page acc rdingly t

y ur R uterOS versi n and install the GPS package by dragging it t the Files menu. Enable GPS

and start w rking:

Enabling - /system gps set enable=yes;

Setting antenna t external - /system gps set gps-antenna-select=external;

Checking c nfigurati n - /system gps print.

https://wiki.mikr tik.c m/wiki/Manual:System/GPS

LR usage

F r interface c nfigurati n please visithttps://wiki.mikr tik.c m/wiki/Manual:Interface/L ra

We rec mmend using ur antenna kit,https://mikr tik.c m/pr duct/l ra_antenna_kit

USB usage

When using an LR card the USB p rt p wer will be switched ff by the CPU. It cann t be used

t gether with an LR card.

Aut m tive c nnect r usage

P wering

Direct-input p wer jack (5.5 mm utside and 2 mm inside, female, pin p sitive plug) accepts 12-30

V DC with pr vided 24 V, 1.2 A adapter.⎓

Ethernet p rt accepts passive P wer ver Ethernet 12-30 V DC (c mpensate f r the l ss n cable,⎓

s m re than 12 V rec mmended).

The aut m tive c nnect r can be used t p wer the device fr m regular 12/24 V c nnecti ns in ⎓

aut m biles and buses. The plug has f ur pins: b tt m left (black) is the gr und, b tt m right is

p wer in (red). The upper tw (AUX) are reserved f r future use.

The p wer c nsumpti n under maximum l ad can reach 12 W with ut attachments. Please attach

gr und (earth) wire t the screw under the d r.

C nnecting t a POE Adapter: (N t included)

1. C nnect the Ethernet cable fr m the device t the POE ut p rt f the POE adapter.

2. C nnect an Ethernet cable fr m y ur LAN t the POE adapter.

3. C nnect the p wer c rd t the adapter, and then plug the p wer c rd int a p wer utlet.

Fr nt status LED behavi r

1. S lid Blue – the device is p wered n.

2. S lid Green – user-defined LED, can be c nfigured in system settings.

3. S lid Green – state f GPS m dule.

4. S lid Green– the set f five green LED, sh ws the signal strength f the cellular netw rk.

miniPCIe sl t

SIM card c nnectivity

MiniPCIe 1LR(t p sl t) supp rts PCIe and USB 2.0 cards but is shared with the USB 2.0 type A

p rt (can use either the USB p rt r miniPCIe sl t at the same time). It can be used nly f r SIM

sl t #1.

MiniPCIe 2LTE(b tt m sl t) supp rts nly USB (2.0 and 3.0) miniPCIe m dems (n PCIe

supp rt). Uses SIM sl t #2 and SIM sl t #3. By default uses SIM sl t #2. The sim cards can be

switched in ROS.

USB 2.0 type A p rt (can nly be used if miniPCIe 1 is n t used). If using LR, the USB will be

turned ff.

T use the t p miniPCIe sl t with a USB type miniPCIe card, switch the USB c nnecti ns t the

miniPCIe sl t: /system r uterb ard usb set type=mini-PCIe This will disable the USB 2.0 p rt n

the fr nt f the unit.

Insert the SI card into the top slot by a chip on the SI card facing down. Bottom slots –

with the chip facing up.

Please check if y u are using the c rrect SIM sl t. F r the m dem inserted in the b tt m mini-pcie

sl t, y u need t use either sim sl t 2 r sim sl t 3. And the used sim sl t needs t be selected in

R uterOS.

CLI c mmand t select the sim sl t:/system routerboard modem set sim-s ot=2

M dem installati n

This LtAP versi n is with the m dem installed in the b tt m sl t. When installing an additi nal

m dem please use the upper sl t. In this case, an internal antenna is c nnected t the b tt m

m dem.

Installing a miniPCIe m dule sh uld be d ne by a qualified pers n, please f ll w safety precauti ns

when handling electrical equipment:

1. Use a wrist gr unding strap when unpacking and w rking with electrical c mp nents t av id

electrical discharge (ESD) damage;

2. Rem ve six screws n the b tt m f the case and lift ff the t p part f the case. N te that antenna

cables are c nnected t the b tt m m dem;

3. L cate the miniPCIe sl t and rem ve tw fact ry attached screws;

4. Attach pr vided a thick thermal pad t the card, and install the card int miniPCIe sl t s that

thermal pad is between PCB and card;

5. The secure card in place using previ usly rem ved tw screws;

6. Guide y ur antenna cables thr ugh penings near the GPS c nnect r and c nnect t y ur m dem.

Rec mmended using silic ne rubber t secure c nnect rs in place.

7. Attach a thinner thermal pad t the t p f the card;

8. When using external antennas, c nnect rs can be attached n the case sides, t make penings use a

6.5 mm drill bit, please seeLtAP kit-series#M untingsecti n part 4;

9. Please see the picture bel w f r reference n h w t place rubber seals f r best water pr tecti n;

10.Reassembly in back rder. Tightening t rque f r PCB screws 0.3 Nm, case c ver/encl sure screws

0.5 Nm.

After y u have reinserted the device int the case and secured it with the screws that were rem ved

earlier, slide in the SIM cards fr m y ur m bile perat r int the SIM sl ts, with the chips facing as

sh wn n the p rt label. The sl t accepts miniSIM (2FF). SIM sl ts 2 and 3 apply t the b tt m

miniPCIe sl t and can be switched in R uterOS "/system r uterb ard sim" menu.

Reset butt n

H ld this butt n during b t time until LED light starts flashing, release the butt n t reset

R uterOS c nfigurati n (t tal 5 sec nds).

Keep h lding f r 5 m re sec nds, LED turns s lid, release n w t turn n CAP m de. The device

will n w l k f r a CAPsMAN server (t tal 10 sec nds).

Or keep h lding the butt n f r 5 m re sec nds until LED turns ff, then release it t make the

R uterBOARD l k f r Netinstall servers (t tal 15 sec nds).

Regardless f the ab ve pti n used, the system will l ad the backup R uterBOOT l ader if the

butt n is pressed bef re p wer is applied t the device. Useful f r R uterBOOT debugging and

rec very.

Access ries

Package includes access ries that c me with the device:

K-67 fastening set. Includes f ur screws 4x25 mm, f ur d wels 6x30 mm.

Cable DC (H4130-04PDB000R 3 mm 2x2P H using) t (StripJacket 5 cm+WireEnd Strip/Tin 1 ⎓

cm) 24 AWG (Black/Red/Blue/Orange) 0.35 m.

EU/US Switching P wer Supply 24 V, 1.2 A, 28.8 W, 86.8%, VI, DC cable: 220 cm RA DC plug ⎓

m d H r CMC sh rter plug.

Operating system supp rt

The device supp rts R uterOS s ftware versi n 6.47.6. The specific fact ry-installed versi n

number is indicated in the R uterOS menu /system res urce. Other perating systems have n t been

tested.

Mikr Tik m bile app

Use the Mikr Tik smartph ne app t c nfigure y ur r uter in the field, r t apply the m st basic

initial settings f r y ur Mikr Tik h me access p int.

1. Scan QR c de and ch se y ur preferred OS.

2. Install and pen applicati n.

3. By default, the IP address and user name will be already entered.

4. Click C nnect t establish a c nnecti n t y ur device thr ugh a wireless netw rk.

5. Ch se Quick setup and applicati n will guide y u thr ugh all basic c nfigurati n settings in a

c uple f easy steps.

Safety Warnings

Bef re y u w rk n any equipment, be aware f the hazards inv lved with electrical circuitry, and

be familiar with standard practices f r preventing accidents.

Read the installati n instructi ns bef re c nnecting the system t the p wer s urce.

This equipment is t be installed by trained and qualified pers nnel, as per these installati n

instructi ns. The installer is resp nsible f r btaining any required l cal r nati nal safety

inspecti ns f the structural integrity f the installati n by the l cal auth rity/inspecti n department.

All installati n meth ds f r m unting an access p int n any wall surface is subject t the

acceptance f l cal jurisdicti n.

The Installati n f the equipment must c mply with l cal and nati nal electrical c des.

This unit is intended t be m unted utd rs n a p le. Please read the m unting instructi ns

carefully bef re beginning installati n.Failure to use the correct hardware and configuration or

to follow the correct procedures could result in a hazardous situation to people and damage to

the system.

We cann t guarantee that n accidents r damage will ccur due t the impr per use f the device.

Please use this pr duct with care and perate at y ur wn risk.

N tice

The Frequency band 5.470-5.725 GHz isn’t all wed f r c mmercial use.

In case WLAN devices w rk with different ranges than the ab ve regulati ns, then a cust mized

firmware versi n fr m the manufacturer/supplier is required t be applied t the end-user

equipment and als prevent the end-user fr m rec nfigurati n.

F r Outd r Usage: End-user requires appr val/license fr m the NTRA.

Datasheet f r any device is available n the fficial manufacturer website.

Pr ducts with the letters “EG” at the end f their serial number have their wireless frequency range

limited t 2.400 – 2.4835 GHz, the TX p wer is limited t 20dBm (EIRP).

Pr ducts with the letters “EG” at the end f their serial number have their wireless frequency range

limited t 5.150 – 5.250 GHz, the TX p wer is limited t 23dBm (EIRP).

Pr ducts with the letters “EG” at the end f their serial number have their wireless frequency range

limited t 5.250 – 5.350 GHz, the TX p wer is limited t 20dBm (EIRP).

Please make sure the device has a l ck package (firmware versi n fr m the manufacturer) which is

required t be applied t the end-user equipment t prevent the end-user fr m rec nfigurati n. The

pr duct will be marked with c untry c de “-EG”. This device needs t  be upgraded t  the latest 
versi n t  ensure c mpliance with l cal auth rity regulati ns! It is the end users resp nsibility t  
f ll w l cal c untry regulati ns, including  perati n within legal frequency channels,  utput p wer,
cabling requirements, and Dynamic Frequency Selecti n (DFS) requirements. All Mikr Tik radi  
devices must be pr fessi nally installed.
CE Declarati n  f C nf rmity
B
G
С настоящото Mikr tīkls SIA декларира, че този тип радиосъоръжение R uterBOARD 
е в съответствие с Директива 2014/53/ЕС. Цялостният текст на ЕС декларацията за 
съответствие може да се намери на следния интернет 
адрес:https://mikr tik.c m/pr ducts
C
S
Tímt  Mikr tīkls SIA pr hlašuje, že typ rádi véh  zařízení R uterBOARD je v s uladu se 
směrnicí 2014/53/EU. Úplné znění EU pr hlášení   sh dě je k disp zici na tét  internet vé 
adrese:https://mikr tik.c m/pr ducts
D
A
Hermed erklærer Mikr tīkls SIA, at radi udstyrstypen R uterBOARD er i 
 verensstemmelse med direktiv 2014/53/EU. EU- verensstemmelseserklæringens fulde 
tekst kan findes på følgende internetadresse:https://mikr tik.c m/pr ducts
D
E
Hiermit erklärt Mikr tīkls SIA, dass der Funkanlagentyp R uterBOARD der Richtlinie 
2014/53/EU entspricht. Der v llständige Text der EU-K nf rmitätserklärung ist unter der 
f lgenden Internetadresse verfügbar:https://mikr tik.c m/pr ducts
E
L
Με την παρούσα ο/η Mikr tīkls SIA, δηλώνει ότι ο ραδιοεξοπλισμός R uterBOARD 
πληροί την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ 
διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο:https://mikr tik.c m/pr ducts
E
N
Hereby, Mikr tīkls SIA declares that the radi  equipment type R uterBOARD is in 
c mpliance with Directive 2014/53/EU. The full text  f the EU declarati n  f c nf rmity is
available at the f ll wing internet address:https://mikr tik.c m/pr ducts
E
S
P r la presente, Mikr tīkls SIA declara que el tip  de equip  radi eléctric  R uterBOARD 
es c nf rme c n la Directiva 2014/53/UE. El text  c mplet  de la declaración UE de 
c nf rmidad está disp nible en la dirección Internet 
siguiente:https://mikr tik.c m/pr ducts
E
T
Käes levaga deklareerib Mikr tīkls SIA, et käes lev raadi seadme tüüp R uterBOARD 
vastab direktiivi 2014/53/EL nõuetele. ELi vastavusdeklaratsi ni täielik tekst  n 
kättesaadav järgmisel internetiaadressil:https://mikr tik.c m/pr ducts
F
I
Mikr tīkls SIA vakuuttaa, että radi laitetyyppi R uterBOARD  n direktiivin 2014/53/EU 
mukainen. EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti  n saatavilla 
seuraavassa internet s itteessa:https://mikr tik.c m/pr ducts
F
R
Le s ussigné, Mikr tīkls SIA, déclare que l'équipement radi électrique du type 
R uterBOARD est c nf rme à la directive 2014/53/UE. Le texte c mplet de la déclarati n 
UE de c nf rmité est disp nible à l'adresse internet suivante:https://mikr tik.c m/pr ducts
H
R
Mikr tīkls SIA  vime izjavljuje da je radijska  prema tipa R uterBOARD u skladu s 
Direktiv m 2014/53/EU. Cjel viti tekst EU izjave   sukladn sti d stupan je na sljedeć j 
internetsk j adresi:https://mikr tik.c m/pr ducts

H
U
Mikr tīkls SIA igaz lja, h gy a R uterBOARD típusú rádióberendezés megfelel a 
2014/53/EU irányelvnek. Az EU-megfelelőségi nyilatk zat teljes szövege elérhető a 
következő internetes címen:https://mikr tik.c m/pr ducts
I
T
Il fabbricante, Mikr tīkls SIA, dichiara che il tip  di apparecchiatura radi  R uterBOARD 
è c nf rme alla direttiva 2014/53/UE. Il test  c mplet  della dichiarazi ne di c nf rmità 
UE è disp nibile al seguente indirizz  Internet:https://mikr tik.c m/pr ducts
I
S
Hér með lýsir Mikr tīkls SIA því yfir að R uterBOARD er í samræmi við grunnkröfur  g 
aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU.
Fullur texti ESB samræmisyfirlýsingar er að finna á eftirfarandi 
veffangi:https://mikr tik.c m/pr ducts
L
T
Aš, Mikr tīkls SIA, patvirtinu, kad radij  įrenginių tipas R uterBOARD atitinka Direktyvą 
2014/53/ES. Visas ES atitikties deklaracij s tekstas prieinamas šiu  internet  
adresu:https://mikr tik.c m/pr ducts
L
V
Ar š  Mikr tīkls SIA deklarē, ka radi iekārta R uterBOARD atbilst Direktīvai 2014/53/ES.
Pilns ES atbilstības deklarācijas teksts ir pieejams šādā interneta 
vietnē:https://mikr tik.c m/pr ducts
M
T
B'dan, Mikr tīkls SIA, niddikjara li dan it-tip ta' tagħmir tar-radju R uterBOARD huwa 
k nf rmi mad-Direttiva 2014/53/UE. It-test k llu tad-dikjarazzj ni ta' k nf rmità tal-UE 
huwa disp nibbli f'dan l-indirizz tal-Internet li ġej:https://mikr tik.c m/pr ducts
N
L
Hierbij verklaar ik, Mikr tīkls SIA, dat het type radi apparatuur R uterBOARD c nf rm is
met Richtlijn 2014/53/EU. De v lledige tekst van de EU-c nf rmiteitsverklaring kan 
w rden geraadpleegd  p het v lgende internetadres:https://mikr tik.c m/pr ducts
N
O
Mikr tīkls SIA erklærer herved at utstyret R uterBOARD er i samsvar med de 
grunnleggende krav  g øvrige relevante krav i direktiv 2014/53/EU. Den fulle teksten til 
EU-samsvarserklæringen er tilgjengelig på følgende 
internettadresse:https://mikr tik.c m/pr ducts
P
L
Mikr tīkls SIA niniejszym  świadcza, że typ urządzenia radi weg  R uterBOARD jest 
zg dny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zg dn ści UE jest d stępny p d 
następującym adresem internet wym:https://mikr tik.c m/pr ducts
P
T
O(a) abaix  assinad (a) Mikr tīkls SIA declara que   presente tip  de equipament  de rádi 
R uterBOARD está em c nf rmidade c m a Diretiva 2014/53/UE. O text  integral da 
declaraçã  de c nf rmidade está disp nível n  seguinte endereç  de 
Internet:https://mikr tik.c m/pr ducts
R
O
Prin prezenta, Mikr tīkls SIA declară că tipul de echipamente radi  R uterBOARD este în 
c nf rmitate cu Directiva 2014/53/UE. Textul integral al declarației UE de c nf rmitate 
este disp nibil la următ area adresă internet:https://mikr tik.c m/pr ducts
S
K
Mikr tīkls SIA týmt  vyhlasuje, že rádi vé zariadenie typu R uterBOARD je v súlade s  
smernic u 2014/53/EÚ. Úplné EÚ vyhlásenie   zh de je k disp zícii na tejt  internet vej 
adrese:https://mikr tik.c m/pr ducts
S
L
Mikr tīkls SIA p trjuje, da je tip radijske  preme R uterBOARD skladen z Direktiv  
2014/53/EU. Cel tn  besedil  izjave EU   skladn sti je na v lj  na naslednjem spletnem 
nasl vu:https://mikr tik.c m/pr ducts

Härmed försäkrar Mikr tīkls SIA att denna typ av radi utrustning R uterBOARD

överensstämmer med direktiv 2014/53/EU. Den fullständiga texten till EU-försäkran m

överensstämmelse finns på följande webbadress:https://mikr tik.c m/pr ducts

WLAN

Operating Frequency / Maximum utput p wer

Betriebsfrequenz / maximale Ausgangsleistung

Fréquence de f ncti nnement / puissance de s rtie

maximale

Frequenza perativa / massima p tenza di uscita

Frecuencia de funci namient / p tencia de salida

máxima

Рабочая частота / максимальная выходная мощность

2400-2483.5 MHz / 20

dBm

LR(SR

D) 863-870 MHz / 14 dBm

ThisMikr Tik device meets MaximumWLAN and LTEtransmitp wer limits per ETSI

regulati ns.F r m redetailed inf rmati nsee Declarati n f C nf rmityab ve / Dieses Mikr Tik-

Gerät erfüllt die maximalen WLAN- und LTE-Sendeleistung Grenzwerte gemäß ETSI-

Bestimmungen. Weitere Inf rmati nen finden Sie ben unter K nf rmitätserklärung / Cet appareil

Mikr Tik respecte les limites maximales de puissance de transmissi nWLANet LTE

c nf rmément aux réglementati ns ETSI. P ur plus d'inf rmati ns, v ir la déclarati n de

c nf rmité ci-dessus / Quest disp sitiv Mikr Tik è c nf rme ai limiti massimi di p tenza di

trasmissi neWLANe LTE in c nf rmità c n le n rmative ETSI. Per ulteri ri inf rmazi ni,

c nsultare la dichiarazi ne di c nf rmità s pra / Este disp sitiv Mikr Tik cumple c n l s límites

máxim s de p tencia de transmisiónWLANy LTE de acuerd c n las regulaci nes ETSI. Para

btener más inf rmación, c nsulte la declaración de c nf rmidad anteri r / Это устройство

Mikr Tik соответствует максимальным пределам мощности передачиWLANи LTE в

соответствии с правилами ETSI. Для получения дополнительной информации см.

Декларацию соответствия выше.

Andere Handbücher für LtAP LR8 LTE kit

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MikroTik Drahtloser Zugangspunkt Handbücher

MikroTik

MikroTik RBOmniTikG-5HacD Bedienungsanleitung

MikroTik

MikroTik LHG R Bedienungsanleitung

MikroTik

MikroTik RouterBoard 951 Ui-2HnD Bedienungsanleitung

MikroTik

MikroTik cAP Leitfaden

MikroTik

MikroTik mAP 2nD Bedienungsanleitung

MikroTik

MikroTik RB931-2nD Bedienungsanleitung

MikroTik

MikroTik RouterBOARD 911 Series Bedienungsanleitung

MikroTik

MikroTik LDF 5 Bedienungsanleitung

MikroTik

MikroTik Audience LTE6 kit Bedienungsanleitung

MikroTik

MikroTik wAP 60G Bedienungsanleitung

MikroTik

MikroTik wAP LR2 kit Bedienungsanleitung

MikroTik

MikroTik NetMetal 5 triple Bedienungsanleitung

MikroTik

MikroTik RBcAPGi-5acD2nD-XL Bedienungsanleitung

MikroTik

MikroTik cAP ax Bedienungsanleitung

MikroTik

MikroTik hAP ac lite TC Bedienungsanleitung

MikroTik

MikroTik Cube Lite60 Series Bedienungsanleitung

MikroTik

MikroTik Groove 2Hn Bedienungsanleitung

MikroTik

MikroTik RBcAPGi-5acD2nD Bedienungsanleitung

MikroTik

MikroTik SXTG-5HPacD-HG Bedienungsanleitung

MikroTik

MikroTik RB912R-2nD-LTm Bedienungsanleitung

MikroTik

MikroTik hAP ac3 LTE6 kit Bedienungsanleitung

MikroTik

MikroTik LHG Series Bedienungsanleitung

MikroTik

MikroTik RBD25G-5HPacQD2HPnD Bedienungsanleitung

MikroTik

MikroTik RBSXTsq5nD Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung