Moxa Technologies EDS-305-M12 Handbuch

MOXA EtherDevice Switch

EDS-305-M12

Hardware Installation Guide

First Edition, July 2007

Moxa Networking Co., Ltd.

Tel: +886-2-8919-1230

Fax: +886-2-8919-1231

www.moxa.com

support@moxa.com (Worldwide)

support@usa.moxa.com (The Americas)

P/N:1802003050010

—1 —

Overview

The MOXA EtherDevice™ EDS-305-M12 series of 5-port smart Ethernet

switches provides a hardened and cost-effective solution for your Ethernet

connections. The EDS-305-M12 switches are IP67-rated to provide protection

against shock and foreign particles. IP67-rated products have the following

characteristics: (1) dust proof, (2) protection against the effects of temporary

immersion in water.

The EDS-305-M12 switches have a wide operating temperature range of -40

to75°C, and are designed to withstand a high degree of vibration and shock.

The rugged hardware design makes the EDS-305-M12 switches perfect for

ensuring that your Ethernet equipment can withstand the rigors associated with

critical industrial applications. The switches are rated for use in hazardous

locations (Class 1 Division 2/Zone 2), and comply with CE, FCC, UL, DNC,

and GL Standards.

Package Checklist

Your EDS-305-M12 is shipped with the following items. If any of these items

is missing or damaged, please contact your customer service representative for

assistance.

yMOXA EtherDevice™ Switch

yHardware Installation Guide

yProduct Warranty Statement

yProtective caps for unused ports and 8 port labels

Features

High Performance Network Switching Technology

y5 10/100BaseT(X) ports (4-pin shielded M12 socket with D coding)

yBroadcast storm protection

yIEEE802.3/802.3u/802.3x

yStore and Forward switching process type

y10/100M, Full/Half-Duplex, MDI/MDIX auto-sensing

Industrial Grade Reliability

yActive circuit protection

yRobust connection

yDust and immersion proof

Rugged Design

yCasing design meets IP67 protection standards

yM12 connectors for robust connections

yOperating temperature range of 0 to 60°C, or extended operating

temperature range of -40 to 75°C

—2 —

EDS-305-M12 Panel Layouts

Front Panel View

EDS-305-M12

1. M12 port’s 10/100 Mbps LED

2. 10/100BaseT(X) port (4-pin shielded M12 socket with D coding)

3. Port Label

4. Power input (5-pin shielded M12 socket with A coding)

5. Power input (PWR) LED

6. Model name

7. Holes for attaching the EDS-305-M12 to a wall with screws (there are 3

holes: bottom left, bottom right, and top middle)

8. Grounding screws

Mounting Dimensions (unit = mm)

Top ViewSide ViewFront View

—3 —

Wiring Requirements

WARNING

Turn the power off before disconnecting modules or wires. The

correct power supply voltage is listed on the product label. Check

the voltage of your power source to make sure that you are using

the correct voltage. Do NOT use a voltage greater than what is

specified on the product label.

These devices must be supplied by a SELV source as defined in

the Low Voltage Directive 2006/95/EC and 2004/108/EC.

ATTENTION

Safety First!

Be sure to disconnect the power cord before installing and/or

wiring your MOXA switch.

This device has UL508 approval. Use copper conductors only,

60/75°C, Tighten To 4.5 pound-inches

ATTENTION

Safety First!

Calculate the maximum possible current in each power wire and

common wire. Observe all electrical codes dictating the

maximum current allowable for each wire size. If the current goes

above the maximum ratings, the wiring could overheat, causing

serious damage to your equipment.

You should also heed the following guidelines:

yUse separate paths to route wiring for power and devices. If power wiring

and device wiring paths must cross, make sure the wires are perpendicular

at the intersection point. NOTE: Do not run signal or communications

wiring and power wiring in the same wire conduit. To avoid interference,

wires with different signal characteristics should be routed separately.

yYou can use the type of signal transmitted through a wire to determine

which wires should be kept separate. The rule of thumb is that wiring that

shares similar electrical characteristics can be bundled together.

yKeep input wiring and output wiring separated.

yIt is strongly advised that you label wiring to all devices in the system when

necessary.

Grounding the EDS-305-M12

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from the

ground screw to the grounding surface prior to connecting devices.

—4 —

ATTENTION

This product is intended to be mounted to a well-grounded

mounting surface such as a metal panel.

10/100BaseT(X) Ethernet Port

Connection

All EDS-305-M12 models have 5 10/100BaseT(X) Ethernet ports (4-pin

shielded M12 socket with D coding). The 10/100TX ports located on the

EDS-305-M12’s front panel are used to connect to Ethernet-enabled devices.

Most users configure these ports for Auto MDI/MDI-X mode, in which case

the port’s pinouts are adjusted automatically depending on the type of Ethernet

cable used (straight-through or cross-over), and the type of device (NIC-type or

HUB/Switch-type) connected to the port.

In what follows, we give pinouts for both MDI (NIC-type) ports and MDI-X

(HUB/Switch-type) ports. We also give cable wiring diagrams for

straight-through and cross-over Ethernet cables.

Pinouts for sockets on EDS-305-M12

Tx port

-Pin 1:

-Pin 2:

-Pin 3:

-Pin 4:

Tx +

Rx +

Tx -

Rx -

Power input

-Pin 1:

-Pin 2:

-Pin 3:

-Pin 4:

-Pin 5:

Input V+

Not assigned

Input V-

Not assigned

Function ground

MDI Port Pinouts MDI-X Port Pinouts 8-Pin RJ45

Pin Signal

1 Tx +

2 Tx -

3 Rx +

6 Rx -

Pin Signal

1 Rx +

2 Rx -

3 Tx +

6 Tx -

—5 —

M12 (4-pin) to M12 (4-pin)

Tx+

Rx+

Tx-

Rx-

Cable Wiring

1   2

2    1

3   4

4   3

Rx+

Tx+

Rx-

Tx-

M12 (4-pin) to RJ45 (8-pin) Straight-Through Cable Wiring

Straight-Through Cable

Tx+

Rx+

Tx-

Rx-

Cable Wiring

1   1

2    3

3   2

4   6

Tx+

Rx+

Tx-

Rx-

M12 (4-pin) to RJ45 (8-pin) Cross-Over Cable Wiring

Cross-Over Cable

Tx+

Rx+

Tx-

Rx-

Cable Wiring

1   3

2    1

3   6

4   2

Tx+

Rx+

Tx-

Rx-

Dual Speed Functionality & Switching

The EDS-305-M12’s 10/100 Mbps switched M12 ports auto negotiate with the

connected device to use the fastest data transmission rate supported by both

devices. All of MOXA’s EtherDevice switches are plug-and-play devices, so

that software configuration is not required. The half/full duplex mode for the

switched M12 ports is user dependent and changes (by auto-negotiation) to full

or half duplex, depending on which transmission speed is supported by the

attached device.

—6 —

Switching and Address Learning

The EDS-305-M12 has an address table that can hold up to 1000 node

addresses, which makes it suitable for use with large networks. The address

tables are self-learning, so that as nodes are added or removed, or moved from

one segment to another, the EDS-305-M12 automatically keeps up with new

node locations. An address-aging algorithm causes the least-used addresses to

be deleted in favor of newer, more frequently used addresses. To reset the

address buffer, power down the unit and then power it back up.

Switching, Filtering, and Forwarding

Each time a packet arrives at one of the switched ports, a decision is made to

filter or forward the packet. Packets with source and destination addresses

belonging to the same port segment will be filtered, constraining those packets

to one port, and relieving the rest of the network from the need to process them.

A packet with destination address on another port segment will be forwarded to

the appropriate port, and will not be sent to the other ports where it is not

needed. Packets that are used in maintaining the operation of the network (such

as the occasional multi-cast packet) are forwarded to all ports.

The EDS-305-M12 operates in the store-and-forward switching mode, which

eliminates bad packets and enables peak performance to be achieved when

there is heavy traffic on the network.

LED Indicators

Several LED indicators are located on the EDS-305-M12’s front panel. The

function of each LED is described in the table below.

LED Color State Description

On Power is being supplied to the power

input.

PWR AMBER Off Power is not being supplied to the

power input.

On TP port’s 10 Mbps link is active.

Blinking Data is being transmitted at 10 Mbps

LNK/ACT

(10M) AMBER Off TP port’s 10 Mbps link is inactive.

On TP port’s 100 Mbps link is active

Blinking Data is being transmitted at 100

Mbps.

LNK/ACT

(100M) GREEN

Off TP port’s 100 Mbps link is inactive.

—7 —

Auto-Negotiation and Speed Sensing

All of the EDS-305-M12’s Ethernet ports independently support

auto-negotiation for speeds in the 10BaseT and 100BaseTX modes, with

operation according to the IEEE 802.3u standard. This means that some nodes

could be operating at 10 Mbps, while at the same time, other nodes are

operating at 100 Mbps.

Auto-negotiation takes place when an M12 cable connection is made, and then

each time a LINK is enabled. The EDS-305-M12 advertises its capability for

using either 10 Mbps or 100 Mbps transmission speeds, with the device at the

other end of the cable expected to advertise in the same way. Depending on

what type of device is connected, this will result in agreement to operate at a

speed of either 10 Mbps or 100 Mbps.

If an EDS-305-M12’s Ethernet port is connected to a non-negotiating device, it

will default to 10 Mbps speed and half-duplex mode, as required by the IEEE

802.3u standard.

Specifications

Technology

Standards IEEE 802.3, 802.3u, 802.3x

Processing Type Store and Forward, with IEEE802.3x full duplex,

back pressure flow control

Interface

M12 Ports 10/100BaseTX auto negotiation speed, F/H duplex

mode, and auto MDI/MDI-X connection

LED Indicators Power, LNK/ACT

Power

Input Voltage 12 to 45 VDC or 18 to 30 VAC (47 to 63 Hz)

Input Current 0.13A @ 24 VDC

0.28A @ 24 VAC

Connection One M12 socket (A-coding), single power input

Protection

Overload current

protection / Limited

current

1.1A

Reverse polarity

protection present

Mechanical

Casing IP67 protection, plastic case

Dimensions (W x H x

D) 60 x 125 x 29.6 mm (2.4 x 4.9 x 1.2 in)

Weight 250g

Installation Field-style mounting

Environment

Operating Temperature 0 to 60°C for standard model,

-40 to 75°C for -T models

Storage Temperature -40 to 85ºC

Operating relative

humidity 5 to 95% (non-condensing)

—8 —

MTBF > 200,000 hours

Regulatory Approvals

Safety UL 508 (pending)

Hazardous Location UL/cUL Class1, Div.2, ATEX Class1, Zone2

(pending)

Maritime DNV, GL (pending)

EMI: FCC Part 15, CISPR (EN55022) class A

EMS: EN61000-4-2 (ESD), level 3

EN61000-4-3 (RS), level 3

EN61000-4-4 (EFT), level 3

EN61000-4-5 (Surge), level 3

EN61000-4-6 (CS), level 2

Shock: IEC60068-2-27

Free Fall: IEC60068-2-32

Vibration: IEC60068-2-6

WARRANTY 5 years

MOXA Internet Services

Customer satisfaction is our number one concern, and to ensure that customers

receive the full benefit of our products, MOXA has set up on-line support

services to provide technical support, driver updates, product information, and

user’s manual updates.

E-mail for technical support:

support@moxa.com (Worldwide)

[email protected]oxa.com (The Americas)

Website for up to date product

information:

www.moxa.com

Inhaltsverzeichnis

Andere Moxa Technologies Netzwerk-Router Handbücher

Moxa Technologies

Moxa Technologies PowerTrans PT-7728 Handbuch

Moxa Technologies

Moxa Technologies WDR-3124A Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDR-G9010 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies IKS-6324 Series Handbuch

Moxa Technologies

Moxa Technologies NPort IA5150 series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice Switch EDS-G205 Handbuch

Moxa Technologies

Moxa Technologies ToughNet TN-5308-4 Handbuch

Moxa Technologies

Moxa Technologies ioLogik E1242 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDR-G903 Handbuch

Moxa Technologies

Moxa Technologies ioLogik E1200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell 5004-HSPA Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDR-G9010 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-P506A-4PoE Series Handbuch

Moxa Technologies

Moxa Technologies EtherDevice EDS-G205A-4PoE Handbuch

Moxa Technologies

Moxa Technologies AWK-4121 Bedienungsanleitung

Moxa Technologies

Moxa Technologies AirWorks AWK-1137C-EU Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell 5004 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDR-G902 Handbuch

Moxa Technologies

Moxa Technologies EDR-810 Series Handbuch

Moxa Technologies

Moxa Technologies UC-8112-LX-STK Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-505A Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies SDS-3008 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-408A Handbuch

Moxa Technologies

Moxa Technologies NPort 5000 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise