Moxa Technologies ToughNet TN-5308-4 Handbuch

P/N: 1802053080022

TN-5308-4/8PoE Series

Hardware Installation Guide

M12 unmanaged PoE Ethernet switches

Moxa ToughNet Switch

Third Edition, April 2014

www.ipc2u.ru

www.moxa.pro

- 2 -

Overview

The ToughNet TN-5308-4PoE and TN-5308-8PoE series M12 unmanaged

PoE Ethernet switches are designed for industrial applications in harsh

environments. The TN series switches use M12 connectors to ensure tight,

robust connections, and guarantee reliable operation against

environmental disturbances, such as vibration and shock. The

TN-5308-4PoE and TN-5308-8PoE series Ethernet switches provide 8 Fast

Ethernet M12 ports, 4 or 8 of which are 10/100BaseT(X) PoE compliant,

support IEEE 802.3/802.3u/802.3x/802.3af with 10/100M,

full/half-duplex, MDI/MDI-X auto-sensing, and provide an economical

solution for your industrial Ethernet network.

TN-5308-4PoE and TN-5308-8PoE switches provide up to 15.4 watts of

power per PoE port, and allow power to be supplied to connected devices

(such as surveillance cameras, wireless access points, and IP phones).

Models with an extended operating temperature range of -40 to 75°C are

also available. The TN-5308-4PoE/8PoE series Ethernet switches are

compliant with EN50155/50121-3-2/50121-4 (railway applications),

making the switches suitable for a variety of industrial applications.

Package Checklist

Your TN-5308-4PoE or TN-5308-8PoE is shipped with the following items.

If any of these items is missing or damaged, please contact your

customer service representative for assistance.

•Moxa ToughNet Switch

•Panel Mounting Kit

•Hardware Installation Guide

•Moxa Product Warranty Statement

Features

High Performance Network Switching Technology

•8 10/100BaseT(X) ports, including 4/8 PoE ports providing up to 15.4

watts per port.

•Store and Forward switching process type.

•IEEE 802.3/802.3u/802.3x.

•10/100M, Full/Half-Duplex, MDI/MDIX auto-sensing.

Industrial-Specific Applications

•Support 48 VDC (46 to 50 VDC) power input.

•Intelligent PD power consumption detection and classification.

•Active circuit protection.

Rugged Design

•M12 circular connector for vibration-resistant robust connections.

•Operating temperature range of -25 to 60°C, or extended operating

temperature range of -40 to 75°C for “-T” models.

•IP40, rugged metal housing.

•Panel mounting or DIN-rail mounting installation capability.

www.ipc2u.ru

www.moxa.pro

- 3 -

TN-5308-4PoE Panel Layouts

TP port’s 10/100 Mbps LED

2. 10/100BaseT(X) port

(female 4-pin shielded M12 connector with D coding)

3. Port label

4. Screw holes for panel mounting kit or DIN rail mounting kit

(there are 3 holes: top middle, bottom left, and bottom right)

5. Power input LED

6. Power input port

(male 5-pin shielded M12 connector with A coding)

7. Grounding screw

8. Power input port pin assignment

9. Model name

10.

TP port pin assignment

11.

Model label

12.

10/100BaseT(X) PoE port

(female 4-pin shielded M12 connector with D coding)

13.

PoE port’s LED

www.ipc2u.ru

www.moxa.pro

- 4 -

TN-5308-8PoE Panel Layouts

TP port’s 10/100 Mbps LED

2. 10/100BaseT(X) port

(female 4-pin shielded M12 connector with D coding)

3. Port label

4. Screw holes for panel mounting kit or DIN rail mounting kit

(there are 3 holes: top middle, bottom left, and bottom right)

5. Power input LED

6. Power input port

(male 5-pin shielded M12 connector with A coding)

7. Grounding screw

8. Power input port pin assignment

9. Model name

10.

TP port pin assignment

11.

Model label

12.

10/100BaseT(X) PoE port

(female 4-pin shielded M12 connector with D coding)

13.

PoE port’s LED

www.ipc2u.ru

www.moxa.pro

- 5 -

Mounting Dimensions (unit = mm)

TN-5308-4PoE

TN-5308-8PoE

Panel/Wall Mounting

Mounting the TN-5308-4/8PoE on the wall requires 3 screws. Please use

the 3 screws packed in the panel mounting kit.

STEP 1: Prepare the 3 screw holes on the wall according to the positions

of the 3 screw holes on the switch shown on the mounting dimension

diagram.

STEP 2: Use one screw to go through the top-middle screw hole on the

switch and screw it into the wall.

STEP 3: Screw in the remaining 2 screws through the bottom-left and

bottom-right holes on the switch to the wall.

www.ipc2u.ru

www.moxa.pro

- 6 -

NOTE

Please use the screws (M3 x 40 mm) packed in the panel

mounting kit.

DIN-Rail Mounting (optional)

With the optional DIN-Rail mounting kit

-TN-5308-4/8PoE (must be purchased

separately), you can mount the

-5308-4/8PoE on a 35mm DIN-Rail.

STEP 1:

Fix the DIN

-Rail attachment plate onto the

rear panel of the switch as shown in the

figure at the right.

STEP 2:

Position the TN

-5308-4/8PoE on

the DIN

-Rail, tilting to hook

clamps over the top edge of the

rail.

STEP 3:

Swing the switch down fully onto the

DIN

-Rail until both clamps

completely latch.

To remove the Moxa ToughNet Switch from the DIN-Rail, simply reverse

Steps 2 and 3 above.

Wiring Requirements

WARNING

Turn the power off before disconnecting modules or wires. The

correct power supply voltage is listed on the product label. Check

the voltage of your power sourc

e to make sure you are using

the

correct voltage. Do NOT use a voltage greater than what is

specified on the product label.

These devices must be supplied by a SELV source as defined in

the Low Voltage Directive 2006/95/EC and 2004/108/EC.

www.ipc2u.ru

www.moxa.pro

- 7 -

ATTENTION

Safety First!

Be sure to disconnect the power cord before installing and/or

wiring your Moxa switch.

This device has UL508 approval. Use copper conductors only,

60/75°C

, and tighten to 4.5 pound-inches. For use in pollution

degree 2 environments.

ATTENTION

Safety First!

Calculate the maximum possible current in each power wire and

common wire. Observe all electrical codes dictating the

maximum current allowable for each wire size. If the current goes

above the maximum ratings, the wiring could overheat, causing

serious damage to your equipment.

Please read and follow these guidelines:

•Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

NOTE: Do not run signal or communications wiring and power

wiring through the same wire conduit. To avoid interference,

wires with different signal characteristics should be routed

separately.

•You can use the type of signal transmitted through a wire to

determine which wires should be kept separate. The rule of thumb is

that wiring that shares similar electrical characteristics can be

bundled together.

•Keep input wiring and output wiring separated.

•It is strongly advised that you label wiring for all devices in the system

when necessary.

Grounding the TN-5308-4/8PoE

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from the

grounding screw to the grounding surface prior to connecting devices.

ATTENTION

This product is intended to be mounted to a well

-grounded

mounting surface such as a metal panel.

www.ipc2u.ru

www.moxa.pro

- 8 -

Connecting the Power Supply

The M12 A-coded 5-pin male connector on the TN-5308-4/8PoE front

panel is used for the DC power input. You have to prepare a power cord

with M12 A-coded 5-pin female connector to connect the switch to the DC

power input.

Pinouts for the power input port on the TN-5308-4/8PoE

STEP 1: Plug your power cord connector to the power input port of the

TN-5308-4/8PoE switch.

STEP 2: Screw the nut on your power cord connector to the power input

connector on the switch to ensure a tight connection.

ATTENTION

Before connecting the

TN-5308-4/8PoE to the DC power input,

make sure the DC power source voltage is stable.

Connecting the Data Lines

10/100BaseT(X) Ethernet Port Connection

All TN-5308-4/8PoE models have 8 10/100BaseT(X) Ethernet ports

(4-pin shielded M12 connectors with D coding). The 10/100TX ports

located on the TN-5308-4/8PoE’s front panel are used to connect to

Ethernet-enabled devices. Most users configure these ports for Auto

MDI/MDI-X mode, in which case the port’s pinouts are adjusted

automatically depending on the type of Ethernet cable used

(straight-through or cross-over), and the type of device (NIC-type or

HUB/Switch-type) connected to the port.

In what follows, we give pinouts for both MDI (NIC-type) ports and MDI-X

(HUB/Switch-type) ports. We also give cable wiring diagrams for

straight-through and cross-over Ethernet cables.

www.ipc2u.ru

www.moxa.pro

- 9 -

Pinouts for the 10/100BaseT(X) Ports on the TN-5308-4/8PoE

Pinouts for the RJ45 (8-pin) Port

RJ45 (8-Pin)

MDI Port Pinouts

MDI-X Port Pinouts

Signal

Tx +

Tx -

Rx +

Rx -

Signal

Rx +

Rx -

Tx +

Tx -

M12 (4-pin, M) to M12 (4-pin, M) Cross-Over Cable Wiring

M12 (4-pin, M) to M12 (4-pin, M) Straight-Through Cable Wiring

www.ipc2u.ru

www.moxa.pro

- 10 -

M12 (4-pin, M) to RJ45 (8-pin) Cross-Over Cable Wiring

M12 (4-pin, M) to RJ45 (8-pin) Straight-Through Cable Wiring

Auto MDI/MDI-X Connection

The Auto MDI/MDI-X function allows users to connect TN-5308-4/8PoE’s

10/100BaseTX ports to any kind of Ethernet device, without needing to

pay attention to the type of Ethernet cable being used for the connection.

This means that you can use either a straight-through cable or cross-over

cable to connect the TN-5308-4/8PoE to Ethernet devices.

LED Indicators

Several LED indicators are located on the TN-5308-4/8PoE’s front panel.

The function of each LED is described in the table below.

LED

Color

State

Description

PWR AMBER

Power is being supplied to the power

input.

Off

Power is not being supplied to the

power input.

(10M) AMBER

TP port’s 10 Mbps link is active.

Blinking

Data is being transmitted at 10 Mbps.

Off

TP port’s 10 Mbps link is inactive.

(100M) GREEN

TP port’s 100 Mbps link is active.

Blinking

Data is being transmitted at 100 Mbps.

Off

TP port’s 100 Mbps link is inactive.

PoE AMBER

Power is being supplied to the Powered

Device (PD).

Off Power is not being supplied to the

Powered Device (PD).

www.ipc2u.ru

www.moxa.pro

Inhaltsverzeichnis

Andere Moxa Technologies Netzwerk-Router Handbücher

Moxa Technologies

Moxa Technologies Managed Ethernet Switch/Extender Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-518E Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDR-G9010 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-405 Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDR-G9010 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDR-8010 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice Switch EDS-G205 Handbuch

Moxa Technologies

Moxa Technologies AWK-4121 Bedienungsanleitung

Moxa Technologies

Moxa Technologies OnCell 5004 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies SDS-3008 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDS-P506A-4PoE Series Handbuch

Moxa Technologies

Moxa Technologies OnCell 5004 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDR-G902-T Bedienungsanleitung

Moxa Technologies

Moxa Technologies SDS-3008 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies TSN-G5000 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies PowerTrans PT-7728 Handbuch

Moxa Technologies

Moxa Technologies ioLogik E1200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EtherDevice EDR-G902 Handbuch

Moxa Technologies

Moxa Technologies ETHERDEVICE EDS-308 Handbuch

Moxa Technologies

Moxa Technologies OnCell G4302-LTE4 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies EDS-518E Bedienungsanleitung

Moxa Technologies

Moxa Technologies E Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1200 Series Bedienungsanleitung

Moxa Technologies

Moxa Technologies ioLogik E1242 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung