National Instruments NI SCXI-1336 Bedienungsanleitung

INSTALLATION INSTRUCTIONS

NI SCXI -1336

Terminal Block for the NI SCXI-1129

This guide describes how to install and connect signals to the

National Instruments SCXI-1336 terminal block to configure the

SCXI-1129 switch module as a 16 ×16 matrix.

Screw terminals on the SCXI-1336 allow you to access the 16 ×16 matrix.

The SCXI-1336 also contains connections for scanner advanced output and

external input trigger signals and has two 128-pin DIN connectors for

connecting columns between modules.

Refer to the NI Switches Getting Started Guide to determine when to install

the terminal block. Visit ni.com/switches for information on other

switching solutions.

Conventions

The following conventions are used in this guide:

»The »symbol leads you through nested menu items and dialog box options

to a final action. The sequence File»Page Setup»Options directs you to

pull down the File menu, select the Page Setup item, and select Options

from the last dialog box.

This icon denotes a note, which alerts you to important information.

This icon denotes a caution, which advises you of precautions to take to

avoid injury, data loss, or a system crash. When this symbol is marked on a

product, refer to the Read Me First: Safety and Radio-Frequency

Interference document for information about precautions to take.

™

Ρ΅νιϋΠȂ඾ུࢊβȜΐ܄ȃ

NI SCXI-1336 Installation Instructions 2 ni.com

bold Bold text denotes items that you must select or click in the software, such

as menu items and dialog box options. Bold text also denotes parameter

names.

italic Italic text denotes variables, emphasis, a cross reference, or an introduction

to a key concept. This font also denotes text that is a placeholder for a word

or value that you must supply.

monospace Text in this font denotes text or characters that you should enter from the

keyboard, sections of code, programming examples, and syntax examples.

This font is also used for the proper names of disk drives, paths, directories,

programs, subprograms, subroutines, device names, functions, operations,

variables, filenames and extensions, and code excerpts.

1. Unpack the Terminal Block

To avoid damage in handling the terminal block, take the following

precautions:

Caution Never touch the exposed pins of connectors.

• Ground yourself using a grounding strap or by touching a grounded

object.

• Touch the antistatic package to a metal part of your computer chassis

before removing the terminal block from the package.

Remove the terminal block from the package and inspect the terminal block

for loose components or any sign of damage. Notify NI if the terminal

block appears damaged in any way. Do not install a damaged terminal

block into your system.

Store the SCXI-1336 in the antistatic envelope when not in use.

2. Verify the Components

Make sure that you have the following items:

❑SCXI-1336 terminal block

❑SCXI chassis

❑SCXI-1129 switch module

❑1/8 in. flathead screwdriver

❑Numbers 1 and 2 Phillips screwdrivers

©National Instruments Corporation 3 NI SCXI-1336 Installation Instructions

❑Long-nose pliers

❑Wire cutter

❑Wire insulation stripper

❑Matrix expansion plug (to expand the number of rows of a matrix)

3. Connect Signals

To connect the signal(s) to the terminal block, refer to Figures 1 and 2

while completing the following steps:

Caution This module is rated for Measurement Category I and intended to carry signal

voltages no greater than 150 V. This module can withstand up to 800 V impulse voltage.

Do not use this module for connection to signals or for measurements within Categories II,

III, or IV. Do not connect to MAINS supply circuits (for example, wall outlets) of 115 or

230 VAC. Refer to the NI Switches Getting Started Guide for more information on

measurement categories.

When hazardous voltages (>42.4 Vpk/60 VDC) are present on any relay terminal, safety

low-voltage (≤42.4 Vpk/60 VDC) cannot be connected to any other relay terminal.

1. Prepare the signal wire by stripping the insulation no more than 7 mm

from the end of the wire.

2. Remove the top cover screw.

3. Unsnap and remove the top cover.

4. Loosen the two strain-relief screws on the strain-relief bar.

5. Run the signal wires through the strain-relief opening.

6. Insert the stripped end of the wire fully into the terminal. Secure the

wire by tightening the screw of the terminal. No bare wire should

extend past the screw terminal. Exposed wire increases the risk of a

short-circuit causing a failure.

7. Connect the safety earth ground to the safety ground lug.

8. Tighten the two screws on the strain-relief assembly to secure the

cables.

9. Reinstall the top cover.

10. Replace the top cover screw.

NI SCXI-1336 Installation Instructions 4 ni.com

Figure 1. SCXI-1336 Top Cover Diagram

1 Top Cover 2 Top Cover Screw

©National Instruments Corporation 5 NI SCXI-1336 Installation Instructions

Figure 2. SCXI-1336 Parts Locator Diagram

1 Column Connectors

2 Screw Terminals

3 Rear Connector

4 Thumbscrew

5 Strain-Relief Screw

6 Strain-Relief Bar

7 Safety Ground Lug

NATIONAL

INSTRUMENTS

NI SCXI-1336 Installation Instructions 6 ni.com

4. Install the Terminal Block

To connect the SCXI-1336 to the SCXI-1129 front panel, refer to Figure 3

and complete the following steps:

Note Install the SCXI-1129 if you have not already done so. Refer to the NI Switches

Getting Started Guide for more information.

1. Plug the SCXI-1336 onto the front connector of the SCXI-1129.

2. Tighten the top and bottom thumbscrews on the terminal block rear

panel to hold it securely in place.

Figure 3. Installing the SCXI-1336 Terminal Block

1 Thumbscrews 2 Front Connector 3 SCXI-1129 4 SCXI-1336

©National Instruments Corporation 7 NI SCXI-1336 Installation Instructions

5. Expand the Number of Rows

The SCXI-1336 offers convenient methods for expanding the number of

rows of a matrix using two or more SCXI-1336 terminal blocks.

Caution When using matrix expansion plugs, only connect terminal blocks of the same

type. Connecting different types of terminal blocks can damage the module or the

equipment connected to the module. For example, you can connect two or more

SCXI-1336 terminal blocks; however, do not connect the SCXI-1336 with any other type

of terminal block.

Figure 4 shows how to use a matrix expansion plug with SCXI terminal

blocks to expand the number of rows of a 4 ×32 matrix, as an example.

The matrix expansion plug connects columns to expand the number of

rows. To expand the number of rows of a matrix, connect a matrix

expansion plug to the top or bottom column connectors of the two terminal

blocks.

Figure 4. Expanding the Number of Rows with the Matrix Expansion Plug

1 Matrix Expansion Plug 2 Thumbscrews 3 Column Connectors

Module 1

Matrix

Expansion

Plug

Module 2

NI SCXI-1336 Installation Instructions 8 ni.com

The SCXI-1336 configures the SCXI-1129 as a 16 ×16 matrix. Connecting

two SCXI-1336 terminal blocks as described above creates a 32 ×16

matrix.

Specifications

Maximum Working Voltage

Maximum working voltage refers to the signal voltage plus the

common-mode voltage.

Channel-to-earth .....................................150 V, Installation Category I

Channel-to-channel.................................150 V

Maximum Current

Maximum current

(per channel) ...........................................2 ADC, 2 AAC

Environmental

Operating temperature ............................0 to 50 °C

Storage temperature................................–20 to 70 °C

Humidity.................................................10 to 90% RH, noncondensing

Pollution Degree .....................................2

Approved at altitudes up to 2,000 m

Indoor use only

Safety

This product is designed to meet the requirements of the following

standards of safety for electrical equipment for measurement, control,

and laboratory use:

• IEC 61010-1, EN 61010-1

• UL 3111-1, UL 61010B-1

• CAN/CSA C22.2 No. 1010.1

Note For UL and other safety certifications, refer to the product label, or visit

ni.com/certification, search by model number or product line, and click the

appropriate link in the Certification column.

©National Instruments Corporation 9 NI SCXI-1336 Installation Instructions

Electromagnetic Compatibility

Emissions ............................................... EN 55011 Class A at 10 m

FCC Part 15A above 1 GHz

Immunity................................................ EN 61326:1997 + A2:2001,

Table 1

EMC/EMI............................................... CE, C-Tick, and FCC Part 15

(Class A) Compliant

Note For EMC compliance, you must operate this device with shielded cabling.

CE Compliance

This product meets the essential requirements of applicable European

Directives, as amended for CE marking, as follows:

Low-Voltage Directive (safety) ............. 73/23/EEC

Electromagnetic Compatibility

Directive (EMC) .................................... 89/336/EEC

Note Refer to the Declaration of Conformity (DoC) for this product for any additional

regulatory compliance information. To obtain the DoC for this product, visit

ni.com/certification, search by model number or product line, and click the

appropriate link in the Certification column.

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on

ni.com/legal for more information about National Instruments trademarks. Other product and company names mentioned herein are

trademarks or trade names of their respective companies. For patents covering National Instruments products, refer to the appropriate location:

Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents.

Andere Handbücher für NI SCXI-1336

Inhaltsverzeichnis

Andere National Instruments Messgerät Handbücher

National Instruments

National Instruments USB-568 RF Series Bedienungsanleitung

National Instruments

National Instruments NI Bedienungsanleitung

National Instruments

National Instruments USB-5684 Bedienungsanleitung

National Instruments

National Instruments NI 5105 Bedienungsanleitung

National Instruments

National Instruments NI PXIe-4138 Handbuch

National Instruments

National Instruments VirtualBench VB-8034 Bedienungsanleitung

National Instruments

National Instruments NI 4350 Bedienungsanleitung

National Instruments

National Instruments NI PXI-562X Bedienungsanleitung

National Instruments

National Instruments Module NI PXI-8250 Bedienungsanleitung

National Instruments

National Instruments FD-11613 Bedienungsanleitung

National Instruments

National Instruments PCIe-5763 Bedienungsanleitung

National Instruments

National Instruments PXIe-5603 Bedienungsanleitung

National Instruments

National Instruments PXIe-5663E Bedienungsanleitung

National Instruments

National Instruments BNC-2810 Bedienungsanleitung

National Instruments

National Instruments NI 9223 Handbuch

National Instruments

National Instruments NI PXIe-4143 Betriebsanleitung

National Instruments

National Instruments PXIe-5622 Bedienungsanleitung

National Instruments

National Instruments NI PXIe-4137 Handbuch

National Instruments

National Instruments NI 5911 Bedienungsanleitung

National Instruments

National Instruments NI Vision PCI-1409 Bedienungsanleitung

National Instruments

National Instruments 446 Series Handbuch

National Instruments

National Instruments 9211A Bedienungsanleitung

National Instruments

National Instruments PXI-4130 Handbuch

National Instruments

National Instruments NI 9775 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung