National Instruments PCIe-6593 Bedienungsanleitung

GETTING STARTED GUIDE

PCIe-6593

PCIe, 16 Gbps, 8-Channel High-Speed Serial Instrument

This document explains how to install, configure, test, and use the PCIe-6593. You can

program the PCIe-6593 with the following software options.

• FlexRIO driver software

• NI LabVIEW Instrument Design Libraries for FlexRIO (instrument design libraries)

Note Adapter modules are not installable or interchangeable on the PCIe-6593.

Contents

FlexRIO Documentation and Resources...................................................................................1

Unpacking the Kit..................................................................................................................... 2

Verifying the Kit Contents........................................................................................................ 3

Recommended Cables (Not Included)...................................................................................... 3

Installing the Software.............................................................................................................. 4

Installing the PCIe-6593 Module into PCIe Chassis................................................................ 4

Configuring the PCIe-6593 in MAX........................................................................................ 5

PCIe-6593 Front Panel and Pinouts.......................................................................................... 6

Block Diagrams.......................................................................................................................10

Accessing FlexRIO with Integrated I/O Examples................................................................. 11

Common FlexRIO with Integrated I/O Examples.......................................................... 12

Component-Level Intellectual Property (CLIP)..................................................................... 12

Synchronizing FlexRIO PCI Express Devices Using Compact Synchronization and

RTSI (Real-Time System Integration)..............................................................................12

Sharing Reference Clocks and Triggers with Another FlexRIO PCI Express Device... 12

Sharing Reference Clocks and Triggers with PCI Express Devices Using RTSI...........13

Troubleshooting...................................................................................................................... 15

What Should I Do if the PCIe-6593 Doesn't Appear in MAX?......................................15

What Should I Do if the PCIe-6593 Fails the Self-Test?................................................ 15

NI Services..............................................................................................................................15

FlexRIO Documentation and Resources

Use the following resources to find more information about the PCIe-6593.

All documentation can be found at ni.com/manuals or in LabVIEW by clicking Help.

Table 1. FlexRIO Documentation and Resources

Document Contents

PCIe-6593 Getting Started

Guide (this document)

• Installation instructions

• Basic programming information

PCIe-6593 Specifications • Operating environment requirements

• DIO specifications

• Clocking specifications

• Physical and mechanical specifications

PCIe-6593 Safety,

Environmental, and

Regulatory Information

• Safety and compliance information

• Environmental information

LabVIEW FPGA Module Help • Basic functionality of the FPGA module

• Instructions for developing and debugging custom

hardware logic

FlexRIO Readme • Minimum system requirements

• Supported Application Development Environments

(ADEs)

• Known issues and bug fixes

• Recent updates

FlexRIO Help • FlexRIO driver API and programming information

• I/O Component Level IP (CLIP) development

information

LabVIEW Examples • Examples showing how to run FPGA VIs on your

device

• Examples showing how to run host VIs on your device

Unpacking the Kit

Notice To prevent electrostatic discharge (ESD) from damaging the device, ground

yourself using a grounding strap or by holding a grounded object, such as your

computer chassis.

1. Touch the antistatic package to a metal part of the computer chassis.

2. Remove the device from the package and inspect the device for loose components or any

other sign of damage.

Notice Never touch the exposed pins of connectors.

2| ni.com | PCIe-6593 Getting Started Guide

Note Do not install a device if it appears damaged in any way.

3. Unpack any other items and documentation from the kit.

Store the device in the antistatic package when the device is not in use.

Verifying the Kit Contents

Verify that the following items are included in the PCIe-6593 kit.

Figure 1. PCIe-6593 Kit Contents

DIO

PORT 1

REF/

CLK IN

4 Vpp MAX

CLK

OUT

PORT 0

PCIe-6593

1 2 3

1. PCIe-6593

2. PCIe-6593 Safety, Environmental, and Regulatory Information

3. PCIe-6593 Getting Started Guide

Recommended Cables (Not Included)

Choose from the following cables to make your high-speed serial connection.

• QSFP28 Active Optical Cable

– 10 m: NI part number 788257-10

• QSFP28 Passive Cable

– 0.5 m: NI part number 788256-0R5

– 1 m: NI part number 788256-01

– 2 m: NI part number 788256-02

Notice When the system is deployed at the upper environmental specification of

the PCIe-6593, standard rated QSFP28 active optical cables may exceed their

operating case temperature range. To ensure the cable case temperature remains

within its operating temperature range, monitor the built-in temperature sensor of the

cable throughout deployment.

Note To convert a QSFP28 signal to a Molex Nano-Pitch signal compatible with

other NI modules, use the SCB-12, NI part number 787419-01.

To purchase high-speed serial cables and the SCB-12, search the NI part number at ni.com.

PCIe-6593 Getting Started Guide | © National Instruments Corporation | 3

Installing the Software

You must be an Administrator to install NI software on your computer.

1. Install an ADE, such as LabVIEW or LabWindows™/CVI™.

2. Download the driver software installer from ni.com/downloads.

NI Package Manager downloads with the driver software to handle the installation. Refer

to the NI Package Manager Manual for more information about installing, removing, and

upgrading NI software using NI Package Manager.

3. Follow the instructions in the installation prompts.

Note Windows users may see access and security messages during

installation. Accept the prompts to complete the installation.

4. When the installer completes, select Restart in the dialog box that prompts you to restart,

shut down, or restart later.

Installing the PCIe-6593 Module into PCIe

Chassis

1. Power off and unplug the computer.

2. Access the computer system expansion slots. This step might require you to remove one

or more access panels on the computer case.

3. Locate a compatible slot and remove the corresponding slot cover on the computer back

panel.

4. Touch any metal part of the computer to discharge any static electricity.

5. Insert the module into the slot you selected. Gently rock the module into place without

forcing it.

4| ni.com | PCIe-6593 Getting Started Guide

Figure 2. Module Installation

1. Module

2. System Expansion Slot

3. PC

6. Secure the PCI Express mounting bracket of the module to the computer chassis with two

bracket screws.

Note Because of the high mass of the PCI Express FlexRIO devices,

installing the bracket screws is recommended. Installing the bracket screws

increases mechanical stability and electrically connects the front panel to the

chassis, which can improve signal quality and electromagnetic performance.

7. Connect the 6-pin PCI Express power connector from the power supply to the PCI

Express FlexRIO device.

8. Reinstall any access panels on the computer case.

9. Power on your computer.

Configuring the PCIe-6593 in MAX

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX

informs other programs about which NI hardware products are in the system and how they are

configured. MAX is automatically installed with FlexRIO.

1. Launch MAX.

2. In the configuration tree, expand Devices and Interfaces to see the list of installed NI

hardware.

Note If you do not see your module listed, press <F5> to refresh the list of

installed modules. If the module is still not listed, power off the system, ensure

the module is correctly installed, and restart.

PCIe-6593 Getting Started Guide | © National Instruments Corporation | 5

3. Record the identifier MAX assigns to the hardware. Use this identifier when

programming the PCIe-6593.

4. Self-test the hardware by selecting the item in the configuration tree and clicking Self-

Test in the MAX toolbar.

The MAX self-test performs a basic verification of hardware resources.

PCIe-6593 Front Panel and Pinouts

Figure 3. PCIe-6593 Front Panel

DIO

PORT 1

REF/

CLK IN

4 Vpp MAX

CLK

OUT

PORT 0

PCIe-6593

6| ni.com | PCIe-6593 Getting Started Guide

Table 2. Signal Connectors for the PCIe-6593

Connector Description Function

DIO Molex Nano-Pitch DIO

connector

Multi-signal DIO connector that provides

access to FPGA multi-gigabit transceivers

(MGTs) and general-purpose LVCMOS

signals

PORT 0 QSFP, SFF-8436 compliant High-speed serial interfacing ports

PORT 1

CLK OUT Standard SMA female

connector

Output for exported clock

REF/CLK IN Standard SMA female

connector

Input for an external Reference Clock

Figure 4. Digital I/O Connector Pinout

A10

A11

A12

A13

A14

A15

A16

A17

A18

A19

A20

A21

B10

B11

B12

B13

B14

B15

B16

B17

B18

B19

B20

B21

Reserved

GND

MGT Rx+ 0

MGT Rx– 0

GND

MGT Rx+ 1

MGT Rx– 1

GND

DIO 4

DIO 5

GND

DIO 0

DIO 1

GND

MGT Rx+ 2

MGT Rx– 2

GND

MGT Rx+ 3

MGT Rx– 3

GND

5.0 V

5 V

GND

MGT Tx+ 0

MGT Tx– 0

GND

MGT Tx+ 1

MGT Tx– 1

GND

DIO 6

DIO 7

GND

DIO 2

DIO 3

GND

MGT Tx+ 2

MGT Tx– 2

GND

MGT Tx+ 3

MGT Tx– 3

GND

Reserved

PCIe-6593 Getting Started Guide | © National Instruments Corporation | 7

Table 3. Available Pins on the DIO connector.

Signal Type Direction

MGT Tx± <0..3> Xilinx UltraScale GTH Output

MGT Rx± <0..3> Xilinx UltraScale GTH Input

DIO <0..7> Single-ended Bidirectional

5.0 V DC Output

GND Ground —

Figure 5. QSFP+ Connector Pinout

GND

Rx2n

Rx2p

GND

Rx4n

Rx4p

ModPrsL

GND

IntL

Vcc Tx

GND

Rx1n

Rx1p

GND

Rx3n

Rx3p

SDA

GND

SCL

Vcc Rx

29 10

Vcc1

LPMode

GND

Tx3p

Tx3n

GND

Tx1p

Tx1n

GND

ResetL

ModSelL

GND

Tx4p

Rx4n

GND

Tx2p

Tx2n

GND

Table 4. Available Pins on the QSFP+ Connectors

Pin Symbol Name/Description

1 GND Ground

2 Tx2n Transmitter Inverted Data Input

3 Tx2p Transmitter Non-Inverted Data Input

4 GND Ground

5 Tx4n Transmitter Inverted Data Input

6 Tx4p Transmitter Non-Inverted Data Input

8| ni.com | PCIe-6593 Getting Started Guide

Table 4. Available Pins on the QSFP+ Connectors (Continued)

Pin Symbol Name/Description

7 GND Ground

8 ModSelL Module Select

9 ResetL Module Reset

10 Vcc Rx +3.3V Power Supply Receiver

11 SCL 2-Wire Serial Interface Clock

12 SDA 2-Wire Serial Interface Data

13 GND Ground

14 Rx3p Receiver Non-Inverted Data Output

15 Rx3n Receiver Inverted Data Output

16 GND Ground

17 Rx1p Receiver Non-Inverted Data Output

18 Rx1n Receiver Inverted Data Output

19 GND Ground

20 GND Ground

21 Rx2n Receiver Inverted Data Output

22 Rx2p Receiver Non-Inverted Data Output

23 GND Ground

24 Rx4n Receiver Inverted Data Output

25 Rx4p Receiver Non-Inverted Data Output

26 GND Ground

27 ModPrsL Module Present

28 IntL Interrupt

29 Vcc Tx +3.3V Power Supply Transmitter

30 Vcc1 +3.3V Power Supply

31 LPMode Low Power Mode

PCIe-6593 Getting Started Guide | © National Instruments Corporation | 9

Table 4. Available Pins on the QSFP+ Connectors (Continued)

Pin Symbol Name/Description

32 GND Ground

33 Tx3p Transmitter Non-Inverted Data Input

34 Tx3n Transmitter Inverted Data Input

35 GND Ground

36 Tx1p Transmitter Non-Inverted Data Input

37 Tx1n Transmitter Inverted Data Input

38 GND Ground

Block Diagrams

Figure 6. FPGA Carrier Block Diagram

DIO Connector

(Front Panel)

Adapter Module

Connector

+5 V

+1.8 V

+12 V

GPIO

Configuration, GPIO

MGTs

Reference Clock

Power Supplies

Flash

FPGA

Triggers

Clk 100

Gen3 x8 PCIe

+12 V, +3.3 V

+12 V

Clk 10

Module Clocking

Synchronization

PLL

DRAM Bank 0

(2 GB)

DRAM Bank 1

(2 GB)

Synchronization

Connector

PCIe

Connectors

MGTs

10 | ni.com | PCIe-6593 Getting Started Guide

Inhaltsverzeichnis

Andere National Instruments PCI-Karte Handbücher

National Instruments

National Instruments 78 R Series Kurzanleitung

National Instruments

National Instruments 6509 Bedienungsanleitung

National Instruments

National Instruments IMAQ PCI-1408 Bedienungsanleitung

National Instruments

National Instruments IMAQ PXI-1411 Bedienungsanleitung

National Instruments

National Instruments IMAQ PCI-1424 Bedienungsanleitung

National Instruments

National Instruments DAQ X Series Bedienungsanleitung

National Instruments

National Instruments R Series Bedienungsanleitung

National Instruments

National Instruments Multisystem eXtension Interface NI PXI-8360 Bedienungsanleitung

National Instruments

National Instruments IMAQ PCI-1408 Bedienungsanleitung

National Instruments

National Instruments NI PXI/PCIe-8231 Bedienungsanleitung

National Instruments

National Instruments PCI-GPIB Bedienungsanleitung

National Instruments

National Instruments IMAQ PCI-1409 Bedienungsanleitung

National Instruments

National Instruments IMAQ PCI-1424 Bedienungsanleitung

National Instruments

National Instruments IMAQ PCI-1422 Bedienungsanleitung

National Instruments

National Instruments NI PCIe-8360 Handbuch

National Instruments

National Instruments PCI-8361 Bedienungsanleitung

National Instruments

National Instruments NI PCIe-8255R Bedienungsanleitung

National Instruments

National Instruments PXIe-8821 Bedienungsanleitung

National Instruments

National Instruments Vision PXI/PCI-1428 Bedienungsanleitung

National Instruments

National Instruments PCI-1407 Bedienungsanleitung

National Instruments

National Instruments 6034E Bedienungsanleitung

National Instruments

National Instruments PXI Express NI PXIe-1073 Bedienungsanleitung

National Instruments

National Instruments MXI-Express x4 Series Bedienungsanleitung

National Instruments

National Instruments 6711 Bedienungsanleitung

Beliebte PCI-Karte Handbücher anderer Marken

ERMA

ERMA SSI 1417 Bedienungsanleitung

SIIG

SIIG CyberSerial Dual PCI Montageanleitung

I-Bus

I-Bus IBC2602 Bedienungsanleitung

Exsys

Exsys EX-60102 Bedienungsanleitung

Chelsio Communications

Chelsio Communications T5 Series Bedienungsanleitung

Conrad Electronic

Conrad Electronic 97 46 71 Bedienungsanleitung

Micro Innovations

Micro Innovations USB650A Bedienungsanleitung

KTI Networks

KTI Networks KF-310 Bedienungsanleitung

Asus

Asus SpaceLink WL230 Bedienungsanleitung

SIIG

SIIG SC2475 Bedienungsanleitung

TRENDnet

TRENDnet TEW-703PI Bedienungsanleitung

Belkin

Belkin F5D7000F Bedienungsanleitung

Pericom

Pericom PI7C7100 Bedienungsanleitung

ADLINK Technology

ADLINK Technology cPCI-3548 Bedienungsanleitung

Digium

Digium TE200 Series Bedienungsanleitung

Allo.com

Allo.com 2nd Gen E1/T1/J1 Bedienungsanleitung

Western Digital

Western Digital FireWire PCI Adapter Bedienungsanleitung

Pyle

Pyle Gamelink PLINK1 Bedienungsanleitung