Nikon Eclipse E600W Bedienungsanleitung

E600W/E600/E400

Teaching Head/Multi Teaching Head

Instructions

M189 E 03.7.VF.3

CAUTION

WARNING

Thank you for purchasing this Nikon product.

This instruction manual is written for users of the Nikon Microscope ECLIPSE

E600W/E600/E400 Teaching Head/Multi Teaching Head.

To ensure correct usage, read this manual carefully before operating the instrument.

•It is prohibited to reproduce or transmit this manual in part or whole without Nikon’s

expressed permission.

•The contents of this manual are subject to change without notice.

• Although every effort has been made to ensure the accuracy of this manual, if you

note any points that are unclear or incorrect, contact your dealer or nearest Nikon

representative.

• Some products introduced in this manual may not be included in the set you’ve

purchased.

• Be sure to read this together with the respective instruction manuals for the

microscope and other instruments being used.

Warning/Caution Symbols Used in This Manual

Although Nikon products are designed to provide you with the utmost safety during use,

incorrect usage or disregard of the instructions can cause personal injury or property

damage. For your safety, read this instruction manual carefully and thoroughly before

using the instrument. Do not discard this manual but keep it near the product for easy

reference.

In this manual, safety instructions are indicated with the symbols shown below. Be sure

to follow the instructions indicated with these symbols to ensure correct and safe

operation.

Symbol Meaning

Disregarding instructions marked with this symbol may lead to

death or serious injury.

Disregarding instructions marked with this symbol may lead to

injury or property damage.

WARNING

1. Intended product use

This product should only be used for microscopic observation. Do not use it for any other

purpose.

2. Do not disassemble

Disassembling may cause malfunction and/or electrical shock. Do not disassemble any

parts other than those mentioned in this manual. If you notice any malfunction, notify your

dealer or nearest Nikon representative.

3. Read all instruction manuals thoroughly

To ensure safety, thoroughly study this instruction manual as well as the instruction manuals

for all other units being used. Adhere strictly to the warnings and cautions given at the

beginning of these instruction manuals.

When using this product in combination with an Epi-fluorescence attachment, be sure to

read its instructions. Care is required when handling the mercury lamp used as the light

source for the Epi-fluorescence attachment.

CAUTION

1. Turn the power off when assembling the system, connecting or disconnecting

cables and replacing the lamp

To prevent electrical shock and damage, be sure to switch off the power switches on the

microscope, power supply, etc., and to unplug the power cord from the wall outlet before

connecting or disconnecting cables and replacing the lamp.

2. Do not wet the instrument

If the microscope or the power supply gets wet, a short circuit may result that could damage

the equipment or make it extremely hot. If you accidentally spill a liquid on the instrument,

immediately turn off the power switch and unplug the power cord. Then use a dry cloth to

wipe away the moisture. If any liquid gets inside the instrument, do not use it; instead,

notify your dealer or nearest Nikon representative.

3. Precautions for assembly

Be careful not to pinch your hands or fingers when assembling the instrument.

Notes on Handling the Instrument

1. Handle the instrument with care

This product is a precision optical instrument. Always handle it with care and do not subject it

to strong physical shock.

2. Lense cleaning

Do not let dust, fingerprints, etc. get on the lenses. Dirt on the lenses, mirrors, etc. will

adversely affect the view of the image. If any of the lenses gets dirty, clean it as described in

section “V. Care and Maintenance.”

3. Installation location

The following conditions should be kept in mind when selecting the location for installation:

•Install the instrument on a surface with little vibration.

• Install the instrument in a location which is not exposed to direct sunlight.

• Install the instrument in a location which is free from dust.

•Do not install the instrument in a warm and humid location (where the temperature is above

40°C or the humidity is above 80%). In such a location, mold or condensation may form on

the lenses or filters.

4. Use of accessories

This attachment splits the light to allow several observers to view the same image

simultaneously. Due to the working principles of the attachment, the brightness of the image is

reduced as the number of observers is increased. The light source produces sufficient light

intensity to allow normal observation of an image with adequate brightness by adjusting the

ND filters inserted in the microscope main unit (main observer’s section).

However, depending on the accessories being used, adequate brightness may not always be

obtained. Please consult your dealer or nearest Nikon representative before using accessories.

5. Pointer and AC adapter

The AC adapter to be connected to the pointer should always be the one provided with the

pointer. The use of any other type of AC adapter could result in accidents or damage to the

instruments.

Contents

Warning/Caution Symbols Used in This Manual ........................................ 1

WARNING......................................................................................... 2

CAUTION ......................................................................................... 2

Notes on Handling the Instrument ...................................................... 3

IComponents of the System ......................................................... 6

II Microscopy.................................................................................... 8

III Assembly .................................................................................... 10

IV Troubleshooting ......................................................................... 17

VCare and Maintenance ............................................................... 18

VI Specifications ............................................................................. 20

IComponents of the System

If the system has not yet been assembled, see section “III. Assembly” first.

For details on assembling and handling the microscope, see the instruction manual supplied with

the microscope.

This attachment can be mounted on the ECLIPSE E600W, E600 or E400 microscope. Note that

the illustrations in this manual shows the ECLIPSE E600 microscope for convenience. (The

microscopes ECLIPSE E800 and E1000 only allow mounting of the dual-viewing (side-by-side)

attachment. The inverted microscopes TE300 and TE200 only allow mounting of the dual-

viewing (side by side), the triple-viewing and the multi-viewing (for 5 persons) attachment.

Separately available components are required for mounting on these microscopes. For details,

see P.12.)

Depending on the type of set you have purchased, some of the following components may not be

included.

Dual-viewing (face-to-face)

This model allows the main observer and the secondary observer to

be positioned face-to-face during observation.

Components

1) Microscope

2) Teaching head F-F

3) Pointer

4) AC adapter

5) Eyepiece tube for secondary observer

6) Eyepieces for secondary observer

Dual-viewing (side-by-side)

This model allows the main observer and the secondary observer to

be positioned side-by-side during observation.

This model can also be mounted on the microscopes ECLIPSE

E800, E1000 and the inverted microscopes TE300 and TE200 with

the separately available components. (Please refer to P.12 for

details.)

When a pointer is going be used, assemble the system so that the

secondary observer will be positioned on the right. If reversed, the

pointer control section will be at the rear of the microscope.

Components

1) Microscope

2) Teaching head S-S

3) Pointer

4) AC adapter

5) Eyepiece tube for secondary observer

6) Eyepieces for secondary observer

7) Support stand

Heat protection

shield

Mounting ring

Height adjustment

clamp screw

Triple-viewing

This model allows two secondary observers to be

positioned face-to-face on either the left or right

side of the main observer during the observation.

This model can also be mounted on the inverted

microscopes TE300 and TE200 with the

separately available components. (Please refer to

P.13 for details.)

Components

1) Microscope

2) MTH main splitter

3) Pointer

4) AC adapter

5) MTH relay unit

6) Eyepiece tube for secondary observer (×2)

7) Eyepieces for secondary observer (×2 sets)

8) Support stand

Multi-viewing for 5 persons

This model allows two secondary observers to be

positioned face-to-face on both sides of the main

observer during observation.

This model can also be mounted on the inverted

microscopes TE300 and TE200 with the

separately available components. (Please refer to

P.14 for details.)

Components

1) Microscope

2) MTH main splitter

3) Pointer

4) AC adapter

5) MTH relay unit (×2)

6) Eyepiece tube for secondary observer (×4)

7) Eyepieces for secondary observer (×4 sets)

8) Support stand (×2)

Multi-viewing for 10 persons

Components

1) Microscope

2) MTH main splitter

3) Pointer

4) AC adapter

5) MTH relay unit (×2)

6) Teaching head F-F

7) Teaching head S-S (×4)

8) Eyepiece tube for secondary

observer (×9)

9) Eyepieces for secondary observer

(×9 sets)

10) Support stand (×6)

I. Components of the System

3) 5)

10)

8) 9)

II Microscopy

If the system has not yet been assembled, see section “III. Assembly” first.

For details on assembling and handling the microscope, see the instruction manual supplied

with the microscope.

Depending on the type of set you have purchased, some of the components described below

may not be included.

1Adjust the microscope correctly.

The secondary observer will view the same image as the main observer. If the main observer

does not adjust the microscope correctly, the secondary observer will not be able to view a

correct image. Also when the main observer did not perform the diopter adjustment, the

secondary observer is likely to have his image out-focused each time the main observer

changes the objective magnification. Be sure to perform the diopter adjustment referring to the

instruction manual supplied with the microscope.

2Adjust the diopter setting at the secondary observer’s position as

well.

After the main observer has adjusted the microscope correctly, the secondary observer should

bring the image into focus with the diopter adjustment rings. Set the dioptor adjustment rings

for both the left and right eyes.

3Method for simple diopter adjustment

When a pointer is attached to the system, turn the respective diopter adjustment rings on the

left and right eyepieces to bring the arrow into focus. It is needed to change the arrow color to

green, and to move the arrow to near the center of view field in advance. This completes

diopter adjustment.

4Using the pointer

Lamphouse cover

Allow the lamp to cool

before replacement

(p.16).

Before replacing the

lamp, turn the arrow

brightness control

counterclockwise until it

clicks to turn off the

arrow and unplug the

AC adapter plug from

the wall outlet.

Arrow rotation dial

Use this to change the direction of

the arrow.

Arrow color selector dial

Turning the dial to the "G" position

changes the color to green, and turning it

to the R position changes it to orange.

(Turn the dial as far as it will go.)

Arrow brightness control

(also functions as

the ON/OFF switch)

Turn the control clockwise to

increase arrow brightness.

Turn it counterclockwise until it

clicks to turn OFF the power

and to make the arrow

disappear.

Arrow control stick

Use this to move the arrow.

II. Microscopy

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nikon Mikroskop Handbücher

Nikon

Nikon Eclipse Series Bedienungsanleitung

Nikon

Nikon ECLIPSE 80i Bedienungsanleitung

Nikon

Nikon SMZ25 Bedienungsanleitung

Nikon

Nikon Multizoom AZ100 Bedienungsanleitung

Nikon

Nikon SMZ745T Bedienungsanleitung

Nikon

Nikon Ti-E Bedienungsanleitung

Nikon

Nikon ECLIPSE Si Bedienungsanleitung

Nikon

Nikon Eclipse Ti TIFT 1454 Bedienungsanleitung

Nikon

Nikon SC Bedienungsanleitung

Nikon

Nikon SMZ645 Bedienungsanleitung

Nikon

Nikon LABOPHC-POL Bedienungsanleitung

Nikon

Nikon P-400R Bedienungsanleitung

Nikon

Nikon ECLIPSE Ni-E Bedienungsanleitung

Nikon

Nikon ECLIPSE MA200 Bedienungsanleitung

Nikon

Nikon ECLIPSE E600 POL Bedienungsanleitung

Nikon

Nikon ECLIPSE L200ND / ECLIPSE L200N Bedienungsanleitung

Nikon

Nikon Epiphot 300 Bedienungsanleitung

Nikon

Nikon A1 Bedienungsanleitung

Nikon

Nikon SMZ460 Bedienungsanleitung

Nikon

Nikon Eclipse E400 Bedienungsanleitung

Nikon

Nikon 50i Bedienungsanleitung

Nikon

Nikon eclipse fn1 Bedienungsanleitung

Nikon

Nikon eclipse Ci-S Bedienungsanleitung

Nikon

Nikon YS100 Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung

Leica

Leica FL560 Bedienungsanleitung