Nikon SMZ1500 Bedienungsanleitung

Stereoscopic Zoom Microscope

SMZ1500

Instructions

M249 E 08.12.NF.5

Warning/Caution Symbols Used in This Manual

Although this product is designed and manufactured to be

completely safe during use, incorrect usage or failure to follow the

safety instructions provided may cause personal injury or property

damage. To ensure correct usage, read this manual carefully before

using the product. Do not discard this manual and keep it handy

for easy reference.

Safety instructions in this manual are marked with the following

symbols to highlight their importance. For your safety, always

follow the instructions marked with these symbols.

Symbol Meaning

Disregarding instructions marked with this

symbol may lead to serious injury or death.

Disregarding instructions marked with this

symbol may lead to injury or property

damage.

WARNING

CAUTION

Thank you for purchasing a Nikon product.

This instruction manual is written for users of Nikon

Stereoscopic Zoom Microscope SMZ1500.

To ensure correct usage, read this manual carefully before

operating the product.

•No part of this manual may be reproduced or transmitted in any

form without prior written permission from Nikon.

•The contents of this manual are subject to change without notice.

•Although every effort has been made to ensure the accuracy of

this manual, errors or inconsistencies may remain. If you note

any points that are unclear or incorrect, please contact your

nearest Nikon representative.

•Some of the equipment described in this manual may not be

included in the set you have purchased.

•If you intend to use any other equipment with this product, read

the manual for that equipment too.

•If the equipment is used in a manner not specified by the

manufacturer, the protection provided by the equipment may be

impaired.

WARNING

1. Intended use of this product

This product is intended only for microscopy. Do not

use it for any other purpose.

2. Do not disassemble

Disassembly may result in damage to the instrument.

Never disassemble any part except as described in this

operation manual. Contact your Nikon representative if

you notice any malfunction of this instrument.

3. Check the input voltage

When using an illuminator, check that the input voltage

displayed on the power supply of the illuminator

matches the operating voltage. Contact your Nikon

representative if the displayed voltage does not match the

operating voltage. Use of an improperly matched

illuminator may result in damage to equipment.

4. Power cord

Always turn the power switch off and unplug the power

cord when replacing the lamp of an illuminator as failure

to do so may result in electric shock or equipment

damage.

5. Heat from the light source

When using an illuminator, do not place cloth or paper or

highly flammable materials, such as gasoline, benzene,

thinner or alcohol, near the lamp as there is a danger of

fire.

•Always use lamps that are of the specified rating only.

For the lamp rating, please refer to the operation

manual.

•Always turn the power switch off and unplug the

power cord when replacing the lamp of a illuminator

as failure to do so may result in electric shock or

equipment damage.

Be sure to always follow these guidelines.

CAUTION

1. Caution when replacing lamps

The lamp and the surrounding area become very hot

during and immediately after using the illuminator. Be

careful not to burn yourself. In addition, when replacing

a lamp be sure the lamp has cooled sufficiently.

2. Check the light source

Always use lamps that are of the specified rating only.

Use of a lamp having a different specification may result

in damage to equipment. For the lamp rating, please

refer to the operation manual.

1. Installation location

Note the following points when installing the stereoscopic

microscope.

•Install the microscope in a location with the temperature between

0°C and +40°C, and humidity of less than 80%. If installed in a

hot and humid location, mold may form on the lenses or

condensation may occur inside, resulting in reduced performance

or damage to the microscope.

•Do not install the microscope in a location subject to direct

sunlight.

•Install the microscope in a location that is not subject to vibration.

•Install the microscope in a location that is free from dust and dirt.

2. Handle the microscope carefully

The stereoscopic microscope is a precision optical instrument.

Handle it carefully and do not subject it to impact. Shock from

impact during transportation or operation as well as forcible

operations may cause damage to the instrument.

3. Cleaning the lenses

Do not let dust, fingerprints, etc. to get on the lenses. Dirt on the

lenses will adversely affect the view of the image. If any lenses

become dirty, clean them as described below.

•Use an air blower to blow dust away. If this does not suffice, brush

away the dust with a soft brush or gently wipe it away with a piece

of gauze.

•Only if the lenses become dirty with fingerprints or grease stains,

slightly dampen a piece of soft, clean cotton cloth with absolute

alcohol (ethyl alcohol or methyl alcohol) and gently wipe away the

dirt. Do not use the same part of the cloth more than once.

•Since absolute alcohol is highly flammable, be careful in handling

it so that it does not ignite.

•Observe the manufacturer’s handling instructions when handling

absolute alcohol.

Be sure to always follow these guidelines.

4. Cleaning painted or plastic parts

Use of silicon cloth is recommended when cleaning painted parts,

plastic parts and printed parts. If such a part becomes excessively

dirty, wipe it gently with gauze dampened in a mild detergent

solution. Do not use organic solvents (such as alcohol, ether, or paint

thinner) as this may result in deformation of the part or remove of

lettering.

5. Storage

Store the microscope in a location with low humidity where mold is

unlikely to form. Do not store the microscope in a location subject

to direct sunlight or high temperature and humidity. During storage,

place a plastic cover over the equipment to prevent dust

accumulation.

6. Regular inspections

Regular inspections are recommended in order to maintain peak

performance. Please consult your Nikon representative for details

about regular inspections.

Contents

Warning/Caution Symbols Used in This Manual ...........................1

Be sure to always follow these guidelines. ....................................2

WARNING ..........................................................................................2

CAUTION ...........................................................................................3

INomenclature ...................................................................................8

II Assembly .........................................................................................10

III Usage................................................................................................ 12

1Preparations for observation .......................................................12

1. Adjust the torque of the focus knob. ...................................... 12

2. Adjust the interpupillary distance. .........................................12

3. Adjust the diopter. .................................................................12

2Focusing ......................................................................................13

1. Check the working distance...................................................13

2. Focus on the sample. .............................................................13

3Zoom ...........................................................................................14

1. Change the zooming magnification. ......................................14

4Diaphragm ...................................................................................14

5If you cannot focus on the sample though the zooming

body is at the highest position. .................................................... 15

IV Using Accessories ........................................................................16

1Reticles ........................................................................................16

2Eyepiece Tube ............................................................................. 16

1. P-BTL low eye-level eyepiece tube .......................................16

2. P-BERG tilted eyepiece tube .................................................17

3P-IER Eyelevel Rizer ..................................................................17

4P-OTR double nosepiece for SMZ1500 ......................................18

5SM-S4L 4 X 4 Stage L ................................................................22

VIlluminator .......................................................................................23

1Halogen Illuminators ................................................................... 23

1. Lamp ......................................................................................24

2. Attaching to the stand ............................................................25

3. Power supplies ....................................................................... 26

4. Lighting area adjustment [G-LS]...........................................28

5. Attaching filters [C-DSLS] .................................................... 28

2P-ICI2 Coaxial Episcopic Illuminator .........................................28

VI Photomicrographic and TV-related Accessories ..................31

1. Photomicrographic magnification ......................................... 32

2. Attaching the beam splitter ....................................................32

3. C-FP Photo reticles ................................................................33

4. Photomicrography procedure ................................................ 33

Table 1: Total Magnification and Real Field ............................................ 35

Table 2: Observable Sample Heights [mm] .............................................35

INomenclature

The figures on p.8 and 9 shows a SMZ1500 combined with P-BT

binocular eyepiece tube, C-W10X eyepieces, HR Plan Apo 1X objective,

P-FMD focusing mount, and C-PS160 plain stand.

Eyepieces

10X, 15X, 20X and

30X eyepieces are

available.

Diopter ring

Refer to “Adjust the

diopter” on p.12.

Eyepiece tube

clamp screw

Diaphragm control dial

Zooming body

Groove for mounting

accessories

Holds the Fluorescent

ring illuminator, Fiber

optic ring illuminator and

the like. Outside

diameter: ø60

HR Plan Apo 0.5X, HR

Plan Apo 1X and HR Plan

Apo 1.6X objectives are

available. Plan Apo and

ED Plan series objectives

for SMZ1000/ 800 can be

used also, but the

magnification in this case

becomes 0.8 times the

magnification indicated on

the objective itself,

moreover the periphery of

the viewfield will be

slightly darkened when

the zooming magnification

is 1X or lower. Refer to

Table 1 on p.35.

Stage plate clamp

screw

Fixes the stage plate to

the stand base.

Objective

Zooming knob

Changes the

magnification of the

sample image. Refer

to “Zoom” on p.14.

Cover for zooming

body clamp screw

(Screw is inside.)

Zooming knob clicks

ON/OFF screw (inside)

Refer to “ON/OFF of

the Zooming Knob

Clicks” on p.14.

P-BT Binocular

eyepiece tube

Eyepiece sleeve

P-BTL low eye-level

eyepiece tube and P-

BERG tilted eye-piece

tube are also

available.

C-PS160 Stand base

Various stands are

available.

Stage plate

The black or the white

side can be chosen

according to the

sample.

Screw for mounting

accessories

Holds the 1/4 lambda

plate and the like.

The screw on the

inside diameter:

M55 ×0.75

Stand

Andere Handbücher für SMZ1500

Inhaltsverzeichnis

Andere Nikon Mikroskop Handbücher

Nikon

Nikon 50i Bedienungsanleitung

Nikon

Nikon A1R Series Service-Handbuch

Nikon

Nikon SMZ1500 Bedienungsanleitung

Nikon

Nikon Eclipse Series Bedienungsanleitung

Nikon

Nikon Eclipse Ci-E Bedienungsanleitung

Nikon

Nikon Eclipse L200 Bedienungsanleitung

Nikon

Nikon A1 Bedienungsanleitung

Nikon

Nikon eclipse Ci-S Bedienungsanleitung

Nikon

Nikon Microphot-FXA Bedienungsanleitung

Nikon

Nikon Eclipse E400 Bedienungsanleitung

Nikon

Nikon Eclipse E400 POL Bedienungsanleitung

Nikon

Nikon Labophot Bedienungsanleitung

Nikon

Nikon Eclipse TE200 Bedienungsanleitung

Nikon

Nikon N-STORM Bedienungsanleitung

Nikon

Nikon eclipse Ci-S Bedienungsanleitung

Nikon

Nikon SMZ1000 Bedienungsanleitung

Nikon

Nikon ECLIPSE 80i Bedienungsanleitung

Nikon

Nikon Eclipse E400 POL Bedienungsanleitung

Nikon

Nikon SMZ745T Bedienungsanleitung

Nikon

Nikon ECLIPSE Si Bedienungsanleitung

Nikon

Nikon ECLIPSE E600 POL Bedienungsanleitung

Nikon

Nikon SMZ645 Bedienungsanleitung

Nikon

Nikon Eclipse E400 POL Bedienungsanleitung

Nikon

Nikon ECLIPSE TE2000-E Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung

Leica

Leica FL560 Bedienungsanleitung