Nilfisk-ALTO ATTIX 3 Bedienungsanleitung

302001673 C

Operating instructions

ATTIX 3, ATTIX 5

ATTIX 7

ATTIX 12 GALLON

ATTIX 19 GALLON

ATTIX 3 / 5 / 7 / 12 GALLON / 19 GALLON

auto

ATTIX 3

auto

ATTIX 5

auto

ATTIX 7 2

1) Option depending on model

Original Instruction Manual

ATTIX 3 / 5 / 7 / 12 GALLON / 19 GALLON

1 Important safety

instructions

2 Description

3 Before starting

4 Operation

5 Applications and

techniques

6 Afternishingwork

7 Maintenance

8 Troubleshooting

9 Further information

Contents

............................................................................................2

2.1 Purpose................................................................................4

2.2 Operating elements..............................................................4

3.1 Assembling the vacuum cleaner ..........................................4

4.1 Connections .........................................................................5

4.1.1 Connecting the suction hose................................................5

4.1.2 Electrical connection ............................................................5

4.1.3 Connecting electrical appliances1) .......................................5

4.1.4 Connecting pneumatic tools1) ...............................................5

4.2 Switching on the vacuum cleaner.........................................5

4.2.1 Switch position "I".................................................................5

4.2.2 Switch position "auto"1) .........................................................5

4.2.3 Setting suction power1) .........................................................6

4.3 Cleaning the filter element ...................................................6

4.3.1 Cleaning the filter element (Push&Clean System)1) .............6

4.3.2 Cleaning the filter element (Automatic Filter Cleaning

System)1) ..............................................................................6

5.1 Techniques ...........................................................................6

5.1.1 Picking up dry substances....................................................7

5.1.2 Picking up liquids..................................................................7

6.1 Switching the vacuum cleaner off and storage.....................7

7.1 Maintenance plan.................................................................8

7.2 Maintenance work ................................................................8

7.2.1 Replacing the waste bag......................................................8

7.2.2 Replacing the filter bag.........................................................8

7.2.3 Emptying dirt tank (ATTIX 3 / 5 / 12 GALLON).....................9

7.2.4 Emptying the dirt tank (ATTIX 7/19 GALLON)......................9

7.2.5 Replacing filter element (Push&Clean System)1) .................9

7.2.6 Replacing filter element (Automatic Filter Cleaning

System)1) ............................................................................10

..........................................................................................11

9.1 Recycling the vacuum cleaner ...........................................12

9.2 Guarantee ..........................................................................12

9.3 Tests and approvals ...........................................................12

9.4 Technical data ....................................................................13

9.5 Accessories........................................................................13

9.6 EU Declaration of Conformity.............................................13

21) Option depending on model

Original Instruction Manual

ATTIX 3 / 5 / 7 / 12 GALLON / 19 GALLON

1 Important safety instructions

Symbolsusedtomark

instructions

Before using the

vacuum cleaner,

always read

the operating

instructions and

keep them read-

ily available.

This symbol is

used to mark safe-

ty instructions that

must be observed

to prevent dam-

age to the vacuum

cleaner and its performance.

This symbol is

used to mark

safety instruc-

tions that must be

observed to pre-

vent damage to persons.

This symbol

indicates tips

and instructions

to simplify work and to ensure

safe operation.

Foryourownsafety Only allow the vacuum cleaner

to be used by persons who have

been trained in its use and who

have been explicitly authorized

to use it.

This appliance can be used

by children aged from 8 years

and above and persons with

reduced physical, sensory or

mental capabilities or lack of ex-

perience and knowledge if they

have been given supervision or

instruction concerning use of the

appliance in a safe way and un-

derstand the hazards involved.

Children shall be supervised to

make sure that they do not play

with the appliance.

Cleaning and user maintenance

shall not be made by children

without supervision.

The use of the vacuum cleaner

is subject to valid national regu-

lations. Besides the operating

instructions and the binding ac-

cident prevention regulations

valid in the country of use, ob-

serve recognized regulations for

safety and proper use.

Do not use any unsafe work

techniques.

Transport

Before transporting the dirt

tank, close all the locks.

Do not tilt the cleaner if there is

liquid in the dirt tank.

Do use a crane hook to lift the

cleaner.

Precautions and safety regu-

lations when using the vacu-

um cleaner

Before start-up

Inspect power cord regularly to

detect signs of damage, e.g.

cracks or ageing.

If the power cord is damaged,

it must be replaced by Alto-Ser-

vice or an electrician to avoid

danger before use of the vacu-

um cleaner is continued.

Purpose and intended use The vacuum cleaners described

in this operating manual are

suitable for

– commercial use, e.g. in ho-

tels, schools, hospitals, fac-

tories, shops, offices and

rental businesses.

The following materials should

not be picked up by the vacuum

cleaner:

– hazardous dust

– hot materials (burning ciga-

rettes, hot ash, etc.)

– flammable, explosive, ag-

gressive liquids (e.g. petrol,

solvents, acids, alkalis, etc.)

– flammable, explosive dust

(e.g. magnesium or alumini-

um dust, etc.)

1) Option depending on model

Original Instruction Manual

ATTIX 3 / 5 / 7 / 12 GALLON / 19 GALLON

Toolsocket Use the socket on the vacuum

cleaner for the purpose defined

in the operating instructions

only.

Before plugging an appliance

into the appliance socket:

1. Switch off the vacuum clean-

er.

2. Switch off the appliance to

be connected.

CAUTION!

Follow the operating instructions

and safety instructions for appli-

ances connected to the power

tool socket.

Maintenance, cleaning and

repair

Only carry out maintenance

work described in the operating

instructions.

Always pull out the mains plug

before cleaning and mainte-

nance of the vacuum cleaner.

Pickingupliquids If foam develops or liquid emerg-

es, stop work immediately and

empty the dirt tank.

Regularly clean the built in float1)

or level indicator hose to limit

the water level1) and check that

they are not damaged.

See section 5 for information on

handling liquids and (hazard-

ous) dust.

Electrical components Check the rated voltage of the

vacuum cleaner before con-

necting it to the mains supply

system. Ensure that the voltage

shown on the rating plate corre-

sponds to the voltage of the lo-

cal mains power supply.

If you are using an extension

cord, use only those specified

by the manufacturer or higher

quality ones (see section 9.4

„Technical data“).

It is recommended that the vac-

uum cleaner should be connect-

ed via a residual current circuit

breaker. This stops the supply

of electricity if the leakage cur-

rent to earth exceeds 30 mA for

30 ms or it has an earth tester

circuit.

When using an extension lead,

check the minimum cross-sec-

tions of the cable:

Cable length

Cross section

<16 A <25 A

up to 20 m

ø1.5mm² ø2.5mm²

20 to 50 m

ø2.5mm² ø4.0mm²

Arrange the electrical parts

(sockets, plugs and couplings)

and lay down the extension lead

so that the protection class is

maintained.

Never spray water on to the up-

per section of the vacuum clean-

er. Danger for persons, risk or

short-circuiting.

Observe the latest edition of the

IEC regulations.

Use only the type of power cord

specified in the operating man-

ual.

Do not damage the power cord

(e.g. by moving over it or pulling

or crushing it).

Disconnect the power cord by

pulling the plug only (do not pull

or tug the power cord).

Inspect the vacuum cleaners to

ensure that they are in proper

condition. Plugs and couplings

in power cords must at least

have splash protection.

Never use the vacuum cleaner

if the filter element is damaged.

41) Option depending on model

Original Instruction Manual

ATTIX 3 / 5 / 7 / 12 GALLON / 19 GALLON

Use only the brushes supplied

with the vacuum cleaner or

specified in the operating manu-

al. The use of other brushes can

adversely affect safety.

Use only original Alto accesso-

ries and spare parts (see sec-

tion 9.5). The use of other parts

can adversely affect safety.

Accessories and spare parts

2 Description

2.1 Purpose When used properly, the

industrial vacuum cleaners

described in these instructions

are suitable for sucking up dry,

non-ammable, non-hazardous

dusts and liquids.

2.2 Operating elements See fold-out page at front of

these operating instructions.

1 Handle

2 Suction pipe support

3 Accessory holder

4 Applicance switch with suc-

tion power control1)

5 Retaining clamp

6 Dirt tank

7 Grip to empty tank 1)

8 Inlet fitting

9 Appliance socket 1)

10 Cable hook

11 Operating knob for filter

cleaning 1)

12 Connection for compressed

air supply 1)

13 Connection for pneumatic

tool 1)

14 Tank locks 1)

15 Castor with brake

3 Before starting

3.1 Assembling the

vacuumcleaner

1. The mains plug should not yet

be inserted into a socket.

2. Open the retaining clamps (1)

and remove upper section of

the cleaner.

3. Take the accessories1) out of

the dirt tank and the packag-

ing.

4. Place a lter bag into the tank

as described in the instruc-

tions (printed on the lter

bag).

IMPORTANT!

Press the lter bag connection

rmly on to the inlet tting.

5. Fit the upper section of the

cleaner (do not damage the

lter bag) and close the re-

taining clamps.

NOTE!

Ensure that the retaining

clamps t properly.

6. Fit the suction tube fastener1)

about 20 cm from the edge of

the lower extension tube as

shown in the gure.

On delivery some of the accesso-

ries are lying in the tank and must

be removed before the vacuum

cleaner is used for the first time.

Remove the upper section of the

vacuum cleaner: The mains plug

should not yet be inserted into a

socket.

1) Option depending on model

Original Instruction Manual

ATTIX 3 / 5 / 7 / 12 GALLON / 19 GALLON

4 Operation

4.1.2 Electrical connection The operating voltage shown on the

rating plate must correspond to the

voltage of the mains power supply.

4.1.3 Connecting electrical

appliances1)

Before switching the

switch to position „auto“,

ensure that the tool con-

nected to the appliance socket is

switched off.

To comply with regulations, only ap-

proved dust producing tools should

be connected.

The maximum power consumption

of the connected electrical appli-

ance is stated in section 9.4 "Tech-

nical data".

4.1 Connections

4.1.1 Connecting the suction

hose

4.2 Switchingonthe

vacuumcleaner

4.2.1 Switchposition"I"

1. Turn the switch to position

"I".

The vacuum cleaner motor

starts.

1. Connect the suction hose.

1. Ensure that the cleaner is

switched off.

2. Insert the power cord into a

properly installed and fused

socket with earthing contact.

1. Connect the electrical ap-

pliance to the appliance

socket1) on the control panel.

4.2.2 Switchposition"auto"1)

Before switching the

switch to position „auto“,

ensure that the tool con-

nected to the appliance socket is

switched off.

1. Turn the switch to position

"auto"1).

The vacuum cleaner motor

starts when the connected

power tool/pneumatic tool is

switched on.

2. When the power tool is

switched off, the vacuum

cleaner continues to run for

a short moment so that any

dust in the suction hose is

conveyed to the lter bag.

4.1.4 Connecting pneumatic

tools1)

Before switching the

switch to position „auto“,

ensure that the tool con-

nected to the appliance socket is

switched off.

Operating pressure of the pneumat-

ic tool is stated in section 9.4 "Tech-

nical data".

1. Connect the pneumatic tool

to the upper quick coupling1)

on the control panel.

2. Connect the compressed air

supply to the lower push-in

nipple1).

61) Option depending on model

Original Instruction Manual

ATTIX 3 / 5 / 7 / 12 GALLON / 19 GALLON

4.2.3 Settingsuctionpower1) The motor speed and the suc-

tion power can be varied with

the suction power control1). This

allows precise adaptation of

the suction power for different

cleaning tasks.

5 Applications and techniques

5.1 Techniques If used correctly, additional ac-

cessories, suction nozzles and

suction hoses can enhance the

cleaning action and reduce the

cleaning effort.

Effective cleaning is achieved if

you follow just a few guidelines

in combination with your own

practical experience in special

elds.

Here are some basic tips.

To ensure that suction performance

is always at its best, the filter ele-

ment is automatically cleaned dur-

ing operation. We recommend com-

plete cleaning if the filter element

becomes extremely dirty.

4.3.2 Cleaning the filter

element (Automatic

Filter Cleaning

System)1)

1. Switch off the vacuum clean-

2. Close the nozzles or suction

hose opening with the palm

of your hand.

10 sec .

4.3 Cleaning the filter

element

4.3.1 Cleaning the filter

element (Push&Clean

System)1)

1. Set the suction power to

maximum.

2. Close the nozzles or suction

hose opening with the palm

of your hand.

3. Press the button to start filter

cleaning three times. The re-

sulting stream of air removes

attached dust from the slats

of the filter elements.

12x3

Push &Clean

Filter Cleaning System

Iauto

3. Turn the switch to position „I“

and let the cleaner operate

for approx. 10 seconds with

the suction hose opening

closed.

If suction performance drops.

1) Option depending on model

Original Instruction Manual

ATTIX 3 / 5 / 7 / 12 GALLON / 19 GALLON

5.1.1 Pickingupdrysub

stances

CAUTION!

Donotpickupammable

substances.

Before picking up dry sub-

stances, always ensure that a

lter bag is inserted in the tank

(see section 9.5 "Accessories"

for order number). Disposal of

the picked up material is then

simple and hygienic.

After picking up liquids, the lter

element is wet. A damp lter

element clogs more quickly

when dry substances are

picked up. For this reason the

lter element should be washed

and dried or replaced by a dry

element before dry substances

are picked up.

5.1.2 Pickingupliquids CAUTION!

Donotpickupammable

liquids.

Before liquids are picked up,

always remove the filter bag/

waste bag and check that the

float1) or the water level limit1)

works properly. (See section

7.2.4 and 7.2.5 “Replacing the

filter element“.)

The use of a separate lter ele-

ment or lter screen is recom-

mended.

If foam appears, stop work im-

mediately and empty the tank.

To reduce the amount of foam,

use foam killer Alto Foam Stop

(see section 9.5 "Accessories"

for order number).

6 Afterfinishingwork

6.1 Switchingthevacuum

cleaner off and storage

1. Switch off the vacuum clean-

er and pull the mains plug

out of the socket.

2. Wind up the power cord and

hang it on the handle.

3. Empty the tank and clean

the vacuum cleaner.

4. After picking up liquids:

Store the upper section of

the cleaner separately so

that the lter element can

dry.

5. Store the cleaner in a dry

room where it is protected

from unauthorized use.

ATTIX 12 GALLON

ATTIX 3

ATTIX 5

ATTIX 19 GALLON

ATTIX 7

81) Option depending on model

Original Instruction Manual

ATTIX 3 / 5 / 7 / 12 GALLON / 19 GALLON

7 Maintenance

7.1 Maintenance plan

Afterfinishingwork As required

7.2.1 Replacing the waste bag =

7.2.2 Replacing the filter bag =

7.2.3 Emptying dirt tank (ATTIX 3 / ATTIX 5 / 12 GAL) =

7.2.4 Emptying dirt tank (ATTIX 7 / 19 GAL) =

7.2.5 Replacing filter element (Push&Clean System)1) =

7.2.6 Replacing filter element

(Automatic Filter Cleaning System)1) =

7.2 Maintenancework

7.2.1 Replacingthewaste

bag

1. Open the retaining clamps

and remove the upper sec-

tion of the cleaner from the

dirt tank.

2. Carefully remove the waste

bag connection (1) from the

inlet fitting.

3. Close the waste bag connec-

tion with the slide (2).

4. Close the waste bag using

the cable binder (3).

5. Dispose of the dirt in accord-

ance with legal regulations.

6. Insert a new waste bag into

the cleaned tank as de-

scribed in the instructions

enclosed.

7.2.2 Replacing the filter bag 1. Open the retaining clamps

and remove the upper sec-

tion of the cleaner from the

dirt tank.

2. Carefully remove the filter

bag connection from the inlet

fitting.

3. Close the filter bag connec-

tion with the slide.

4. Dispose of the filter bag in

accordance with legal regu-

lations.

5. Place a new filter bag into the

cleaned tank as described in

the instructions (printed on

the filter bag).

Press the waste bag connection of

the new waste bag firmly on to the

inlet fitting.

Press the filter bag connection of

the new filter bag firmly on to the

inlet fitting.

Andere Handbücher für ATTIX 3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nilfisk-ALTO Staubsauger Handbücher

Nilfisk-ALTO

Nilfisk-ALTO ATTIX 350-0H Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO ATTIX 30 PC Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO CENTIX 20 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO ATTIX 30 H Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO Aero 20-01 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO AERO 21 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO Aero 26 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO MAXXI II Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO ATTIX 30 H Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO Attix 19 Gallon AE Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO Aero 26 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO BK 2.0 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO MAXXI WD 3 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO 40/PC/XC Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO 12 AS EC Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO ATTIX 550-01 Technisches Datenblatt

Nilfisk-ALTO

Nilfisk-ALTO 963-21 ED XC Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO ATTIX 961-01 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO VC300 Series Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO ATTIX 40-0M PC TYPE 22 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO Attix 19 Gallon AE Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO ATTIX 961-01 Betriebsanleitung

Nilfisk-ALTO

Nilfisk-ALTO Dynamics 440-M/B1 Bedienungsanleitung

Nilfisk-ALTO

Nilfisk-ALTO Dynamics 440-M/B1 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch