Olympus BH2 Series Betriebsanleitung

OLYMPUS

RESEARCH

MlCROSCOPES

SERIES

BH2

(BHS)

REPAIR

MANUAL

OLYMPUS MICROSCOPE SERVICING PERSONNEL

This manual has been published chiefly for proviciing repair procedures for the OLYMPUS System Micro-

scope BHS, but

applicable also to the Models BHT and BHTU which are similar tothe Model BHS in the

internal construction of the main body. However, light sources of these models are different and specifi-

cally described in "Troubleshooting" contained inthe

last

part of this manual.

The Series BH2 models feature

fine

coarse adjustment assembly of essentially the same design as that

of the Series BH, except for

reduction gear unitwhich

attached to the rear of the arm in Series BH2.

BH2-BIITR tubes are of the constant tube length design and are different in the internal mechanism from

BH-BIITR, though optical alignment procedures for the prisms are nearly the same. Further, adoption

of the constant tube length design has made it possible

take lnicrographs with the focusing eyepiece

inserted into the right side eyepiece sleeve of the observatio~ilube, illereby introducing the necessity to

adjust parfocality of observation tube and phototube.

In order to prevent trouble from occurring during shipmelit or long-term use, importants immovable

parts are fixed with cement and are particularly descrit~edat the steps of disassembly in this manual.

Removing procedures are given for parts which are glued with adhesive agents of exceptionally high bond-

ing force.

Prisms are glued with Araldite OT1028. When

necessary todisassemble these prisms, cut off excessive

cement with

razor blade (one-sideedge) or knife edge before attempting disassembly. Ifthe prisms cannot

be disassembled even after removing excessive cement, heat the entire area of the cemented surface with

asoldering iron or asimilar tool.

In the descriptions contained in this manual, "right" and "left" are defined inthe direction as seen bythe

microscopist sitting inthe observing positionthrough the microscope.

For cleaning lenses, a liquid mixture of alcohol

(3)

and ether

(7)

should be used. For details, reference

should be made to"How toClean the Microscope" which

available upon separate request.

Requisites for repairs:

First of all, ascertain what parts of the microscope the user or owner of which wishes you torepair.

2. Never fail to check the entire function of the microscope before you commence

its

repair.

a) Findout what parts are defective and how much they are damaged.

b) Prior to repair, think of the best possible order to disassembling the defective parts in

most

efficient way.

After completing the repair, check the functions of not only the re-assembledparts but also the entire

microscope to make sure no defect should be left unremedied.

Be careful not to deform repair parts during the assembly, make

practice touse tools and jigs speci-

fied for purpose.

Make repairs promptly and accurately.

CONTENTS

REPAIR TOOLS AND JIGS

............................................

EXPLODED PARTS DIAGRAMS

........................................

DISASSEMBLY PROCEDURE FOR FlNE

COARSE ADJUSTMENT UNIT OF BHS

..................................

ASSEMBLY PROCEDURE FOR FlNE

COARSE ADJUSTMENT UNIT OF BHS

..................................

DISASSEMBLY PROCEDURE FOR BASE UNIT

...........................

..............................

6 ASSEMBLY PROCEDURE FOR BASE UNIT 42

...............................

7 DISASSEMBLY PROCEDURE FOR BIi2.CH 44

................................

8 ASSEMBLY PROCEDURE FOR BH2..CH.. 46

OVERALL ASSEMBLY AND ADJUSTMENT FOR BHS-F

...................

10 DISASSEMBLY PROCEDURE FOR BH2.BI

................................

...................................

11 ASSEMBLY PROCEDURE FOR BH2.BI 57

DISASSEMBLY PROCEDURE FOR BH2.TR

...............................

ASSEMBLY PROCEDURE FOR BH2.TR

..................................

DISASSEMBLY PROCEDURE FOR BH2.SV

...............................

ASSEMBLY PROCEDURE FOR BH2.SV

..................................

............

DISASSEMBLY AND ASSEMBLY PROCEDURE FOR BH2.HRIHL 89

DISASSEMBLY PROCEDURE FOR BH2.AAC

..............................

ASSEMBLY PROCEDURE FOR BH2.AAC

.................................

DISASSEMBLY AND ASSEMBLY PROCEDURE FOR BH2.CD..

.............

TROUBLESHOOTING OF ELECTRICAL SYSTEM

..........................

ELECTRIC CIRCUIT DIAGRAM

........................................

REPAIR TOOLS AND GREASE

1-1

Regular Tools

OTOOl

OT0015

OT0016

OT0018

OT0022

OT0023

OT0035

OT0079

OT0207

OT0216

OT0309

OT0317

OT1027

OT1028

OT1126

OT1131

OT1141

OT1144

1-2

Grease

OT2006

OT2008

OT2012

1-3

Special Tools

Set of screwdrivers (6pcs.)

Phillips screwdriver (mediumsize)

Phillips screwdriver (largesize)

Screwdriver (largesize)

Adjustable spanner (flattip)

Handle of small size Phillips screwdriver, using OT1141

Tweezers (specialmade)

Pliers

Allen wrench (width2.5 mm)

Set of Allen wrenches (8pcs.)

Tension gauge

Thickness guage

Alon Alpha (adhesive)

Araldite (adhesive)

Bellock (adhesive)

Shellac (20

g) (adhesive)

Phillips screwdriver tip, using OT0023

Tension gauge

OX Eyepiecewith cross hair

Focusing magnifier (PM-FT-36)

Pin face wrench for tension adjustment nutAA007700

Pin face wrench for nut of stage

Pinface wrench for fine adjustment

Tool for holdinggear

Test plate for observation tube alignment (1/100 square)

Centering objective for optical alignment of observation tube (for 160 mm)

Standard objective for optical tube length alignment

Centering objective for optical alignment of observation tube (for 200 mm)

Special WF 10X for optical tube length alignment

Special centering telescope

Stnadard jig for mechanicaltube length control

Jig for receptacle balls

Spoon for balls

Pin tiole tube for aligning optical axis of mirror

Centering adapter

Positionitiy jig for rack AB024100

Block for cliccl<inysensitivity of fine adjustment

Block for cliccking sensitivity of fine adjustment

Jig for UIITR tulle prism alignment of BH2 series

Alignment jig

IJosilioniligjig for prism ZA071000 of BH2-TR

.Jig fol intcrljupillary distance

62 mm of BH2-BIITR

Aligri~r~etitjig for photo tube of BH2-TR

Finder eyepiccc

A MODEL OR UNIT. PARTS NUMBER AND QUANTITY.

-3-

L7:::8500/ KNW 3SA

AB 0866007,

AB 034700

AB 023400

AA 001

t100

AB 024800

II<

3X/l(;, PUK2x6s.

AB 034800

A13

105A

6SA Al

0:3?

100

PUK 2X4SA AA 782900

A13

033800

AU 0!19000

AB 059200

AB 3X6SA

3PUK 2 6X 4SA7 TAB 060700

,,r

CSK 2 6X 6%

'$w@~

EXPLODED PARTS

DIAGIIAM

russuu-

CA 035600

OLVMPUS OPTICAL

C,Ul,

Pl%i&'lTC'r.

JAP

----

WtfL

01~1)~

lilbi(i

014

'~I'AfiI

1~~it4

lsl

MOIH

011

O~JI

IIAII

rd11t

t1i1

~trit)

A'JI

(:I

ARIF

OlJAN

CSK

2.6

6SA

EXPLODED PARTS DIAGRAM

MODEL

UNIT

FIG

NOTE: WHEN ORDERING FOR SPARE PARTS. PLEASE CLARIFY

A MODEL OR UNIT. PARTS NUMBER AND QUANTITY.

-5-

M0I)I

OIi UNIT. PARTS NUMBER AND OUANTITY.

UYPC 64-1(For 100V)

UYPC 64-2(For 200V)

DT 0105(For 100V)

DT 0106(For 200V)

-CUK 3X4SA

'AA

14700

EXPLODED PARTS DIAGRAM

AB 099900(For 100V)

MODEL

B2-BDS-2

OLYMPUS OPTICALCO.,LTD.TOKYO,JAPAN

CUK

X4SA

NOTE. WHEN ORDERING FOR SPARE PARTS.PLEASE CLARIFY

A h40DEL OR UNIT. PARTS NUMBER AND QUANTITY.

Andere Handbücher für BH2 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Olympus Mikroskop Handbücher

Olympus

Olympus Fluoview FV1000 Installationsanleitung

Olympus

Olympus CK40-TBI Betriebsanleitung

Olympus

Olympus CH Series Betriebsanleitung

Olympus

Olympus CH10 Betriebsanleitung

Olympus

Olympus DP22 Bedienungsanleitung

Olympus

Olympus CKX53 Bedienungsanleitung

Olympus

Olympus CX33 Bedienungsanleitung

Olympus

Olympus bx40 Bedienungsanleitung

Olympus

Olympus FV5-LD405 Bedienungsanleitung

Olympus

Olympus BX3-SSU Bedienungsanleitung

Olympus

Olympus VMF Bedienungsanleitung

Olympus

Olympus BHA-P Bedienungsanleitung

Olympus

Olympus CX21LED Bedienungsanleitung

Olympus

Olympus SZX16 Bedienungsanleitung

Olympus

Olympus U-D7RES Bedienungsanleitung

Olympus

Olympus POS Bedienungsanleitung

Olympus

Olympus SZX2-LTTR Bedienungsanleitung

Olympus

Olympus CX31-P Bedienungsanleitung

Olympus

Olympus IX81-ZDC2 Bedienungsanleitung

Olympus

Olympus 1X71 Bedienungsanleitung

Olympus

Olympus BX60M Bedienungsanleitung

Olympus

Olympus SZX16 Bedienungsanleitung

Olympus

Olympus BX2 SERIES Bedienungsanleitung

Olympus

Olympus CK40M FRAME Betriebsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Leica

Leica FL560 Bedienungsanleitung