Olympus SZX7 Bedienungsanleitung

INSTRUCTIONS

This instruction manual is for the Olympus stereomicroscope system. To ensure the safety,

obtain optimum performance and to familiarize yourself fully with the use of this microscope, we

recommend that you study this manual thoroughly before operating the microscope.

Retain this instruction manual in an easily accessible place near the work desk for future reference.

For details of products included in the configuration of this system, see “1 Nomenclature” (P.3)

and “9 Optional modules” (P. 19).

Stereomicroscope system

SZX7

Optical Microscope and Accessory

Downloaded from ManualsNet.com search engine

SZX7

Important............................................................................................................................................................. 1

1 Nomenclature........................................................................................................................................... 3

2 Controls ......................................................................................................................................................... 4

3 Observation procedure.................................................................................................................... 5

3-1 Reparation............................................................................................................................................................... 5

3-2 Procedure................................................................................................................................................................. 5

4 Operation...................................................................................................................................................... 6

4-1 Stand............................................................................................................................................................................ 6

1Using the stage...............................................................................................................................................................................6

Adjusting the tocus adjustment knob tension................................................................................................................6

4-2 Observation tube............................................................................................................................................... 6

1Adjusting the interpupillary distance...........................................................................................................................6

Adjusting the diopter (zoom confocality adjustment)

......................................................................................................7

3Using the eye shades...............................................................................................................................................................8

4Using an eyepiece micrometer disk............................................................................................................................8

5Selecting the light path (SZX2-TR30) ..........................................................................................................................9

6Adjusting the tilt (SZX2-TTR) ..............................................................................................................................................9

4-3 Microscope body.............................................................................................................................................10

1Zoom magnification indication...................................................................................................................................... 10

2Switching the click stop ON-OFF................................................................................................................................. 10

3Using auxiliary sleeve SZ2-ET (option) .........................................................................................11

4-4 Camera observation and photomicrography.........................................................................12

1Selecting the camera adapter magnification ................................................................................................... 12

2Mounting the camera adapter........................................................................................................................................12

3Selecting the camera light path.................................................................................................................................... 12

Contents

Correct assembly and adjustments are critical for the microscope to manifest its full performance. If you are going to

assemble the microscope by yourself, please read “8 Assembly” (P.16). For the assemblies of the modules for which

instruction manuals are available, refer to their instruction manuals.

Downloaded from ManualsNet.com search engine

5 Troubleshooting....................................................................................................................................13

6 Specifications.........................................................................................................................................14

7 Optical performance........................................................................................................................15

8 Assembly....................................................................................................................................................16

8-1 Assembly diagram .........................................................................................................................................16

8-2 Detailed assembly procedures...........................................................................................................17

9 Optional modules...............................................................................................................................19

9-1 Eye point adjuster SZX-EPA...................................................................................................................19

9-2 AS unit SZX-AS ..................................................................................................................................................19

9-3 BX stage adapter type 1 SZX-STAD1............................................................................................20

9-4 Stage adapter type 1 SZH-STAD1 ...................................................................................................22

9-5 Gliding stage SZH-SG................................................................................................................................23

9-6 Cup stage SZH-SC........................................................................................................................................24

Downloaded from ManualsNet.com search engine

SZX7

Important

1. After the equipment has been used in an observation of a specimen that is

accompanied with a potential of infection, clean the parts coming in contact with the

specimen to prevent infection.

· Moving this microscope is accompanied with the risk of dropping the specimen. Be sure to

remove the specimen before moving this product.

· Hold the bottom of the stand with one hand while holding base column with the other hand

to avoid tilting the micro-scope.

· In case the specimen is damaged by erroneous operation, promptly take the infection

prevention measures.

2. The desktop should be a level surface with an inclination of less than 3°, and the load to the

microscope should be less than 7 kg (when the SZ2-ST standard stand is used).

The microscope may become unstable when certain intermediate attachment and/or photography unit are

mounted on it. Be careful so that the microscope does not topple down.

1. A microscope is a precision instrument. Handle it with care and avoid subjecting it to sudden or severe impact.

2. Do not use the microscope where it is subjected to direct sunlight, high temperature and humidity, dust or

vibrations. (For the operating conditions, see “6 Specifications” (P. 14).)

3. Do not turn the zoom adjustment knobs beyond the stopper positions. Otherwise, the internal mechanism may be

damaged.

Do not turn the left and right zoom adjustment knobs in the opposite directions, as this will result in a failure.

4. Only one intermediate attachment having thickness up to 60 mm can be mounted on the microscope. If two

intermediate attachments or an intermediate attachment thicker than 60 mm is mounted, the image may be cut a

little.

However, the coaxial reflected light illuminator (SZX-ILLC) is not counted in the number of intermediate attachment.

When using multiple modules, they should be stacked in order of the SZX-ILLC, SZX-AS, SZX-RFA, SZX-SDO2

and SZX-EPA from the bottom to the top.

TIP

The SZX7 stereomicroscope is provided with the ESD (Electro-Static Discharge) protection specifications. It is provided with

electroconductive coating in the external finish to reduce the surface resistance and grounding lead wires in their standard

stand or system to eliminate static electricity from them.

To maintain the ESD protection performance, always use the microscope in combination with the

modules described in this manual or options having the ESD protection specifications. Otherwise, the

grounding will not work properly.

CAUTION

Safety precautions

1Getting ready

Downloaded from ManualsNet.com search engine

If the microscope is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition,

the equipment may also be damaged. Always use the equipment as outlined in this instruction manual.

The following symbols are used to set off text in this instruction manual.

CAUTION : Indicates that failure to follow the instructions in the warning could result in

bodily harm to the user and/or damage to equipment (including objects in the

vicinity of the equipment).

NOTE

: Indicates that failure to follow the instructions could result in damage to equipment.

TIP

: Indicates commentary (for ease of operation and maintenance).

3Caution

1. To clean the lenses and other glass components, simply blow dirty away using a commercially available blower

and wipe gently using a piece of cleaning paper (or clean gauze).

If a lens is stained with fingerprints or oil smudges, wipe it gauze slightly moistened with commercially available

absolute alcohol.

Since the absolute alcohol is highly flammable, it must be handled carefully.

Be sure to keep it away from open flames or potential sources of electrical sparks –– for example,

electrical equipment that is being switched on or off.

Also remember to always use it only in a well-ventilated room.

2. Do not attempt to use organic solvents to clean the microscope components other than the glass components

because they use plastic resin materials extensively. To clean them, use a lint-free, soft cloth slightly moistened with

a diluted neutral detergent.

3. Do not disassemble any part of the microscope as this could result in malfunction or reduced performance.

4. When disposing of the microscope. Check the regulations and rules of your local government and be sure to

observe them.

NOTE

2Maintenance and storage

4Intended use

This product has been designed to be used to observe magnified images of specimens in various routine work and

research applications.

This includes the observation of living cells or of specimen taken from tissues to gain physiological or morphological

information at hospitals or laboratories.

Typical field of applications are genetics, human blood and tissue examination, neurology, pharmacology and cellular biology.

Further applications of this device include measurement and imaging for materials research, precision manufacturing, electronics

design and medical device fabrication. Additional industrial applications are added by individual companies and researchers.

Do not use this product for any purpose other than its intended use.

This product complies with the requirements of directive 98/79/EC concerning in vitro diagnostic medical

devices. CE marking means the conformity to the directive.

This product is applied with the requirements of EMC standard IEC/EN61326-2-6 and IEC/EN61326-1

concerning electromagnetic compatibility.

This product complies with the emission and immunity requirements described in IEC61326 series. The

electromagnetic environment should be evaluated prior to operation of this product.

Downloaded from ManualsNet.com search engine

SZX7

1 Nomenclature

The modules shown in the following diagram are merely the typical examples. For the modules that are not shown

below, please consult Olympus or the latest catalogues.

Modules marked* are given the ESD specifications.

A separate instruction manual is available for the module marked **.

Note1) The microscope can also be mounted on the SZ2-STU1/STU2/STU3 large stand as well as on the SZX2-ST SZX

standard stand by using the SZ2-STB1/SZ2-STS focusing arm.

Stage Plate

Black/White: SZ2-SPBW*

(ESD protection on black surface)

Transparent: SP-C

Other stage adapter

Stage Plate

Observation tube

Binocular tube: SZX-BI45*

SZX-BI30

Trinocular tube: SZX2-TR30

Tilting trinocular tube: SZX2-TTR

Ergonomic long tilting trinocular:

SZX2-LT TR**

Eyepiece

WHSZ 10X*

WHSZ 10X-H*

WHSZ 15X-H*

WHSZ 20X*

WHSZ 20X-H*

WHSZ 30X-H*

Microscope Body

7X Zooming microscope body:

SZX-ZB7*

Objective

DFPL 0.5X-4*

DFPL 0.75X-4*

DFPLAPO 1X-4*

SZX-ACH 1X*

SZX-ACH 1.25X*

DFPL 1.5X-4*

DFPL 2X-4*

Stand Note1)

Standard stand: SZ2-ST*

LED illuminator stand: SZ2-ILST**

LED transmitted light illumination:

SZX2-ILLTQ**

SZX2-ILLTS**

Intermediate attachment

AS unit: SZX-AS

Eye point adjuster: SZX-EPA

Extendable eyepoint adjuster:

SZX2-EEPA**

Coaxial reflected light illuminator:

SZX2-ILLC10**

Side-by-side viewing attachment:

SZX-SDO2*

Auxiliary sleeve

SZ2-ET*

Olympus classifies SZX-ZB7 as an optical microscope and other units as optical microscope accessories.

Downloaded from ManualsNet.com search engine

2Controls

Eye shades (P.8)

Click stop ON-OFF screw (P.10)

Stage plate

Allen screwdriver

Accessory mounting screws

(x 5)

Zoom adjustment knobs (P.7)

0.8X to 5.6X

Focus adjustment knob (P.6)

Stroke: 120mm

Accessory mounting holes

Diameter ø 4 mm (x 2)

Grounding holes (P.16)

For ø 4 mm banana plugs (x 4)

Allen screwdriver holder (P.16)

With double-side adhesive tape

Stage adapter

mounting screws

M4 screws (x 2)

Eyepiece clamping knobs

Stage plate

Body clamping knob

Threaded for accessory mounting

Zoom magnification indication (P.10)

Indicates 0.8, 1, 1.25, 1.6, 2, 2.5, 3.2, 4, 5 and 5.6

Zoom adjustment knobs (P.7)

Focus adjustment knob

(P.6)

0.8X to 5.6X

Allen screwdriver holder (P.16)

M4 screws (x 2)

Allen screwdriver

With double-side adhesive tape

Allen screwdriver holder (P.16)

Downloaded from ManualsNet.com search engine

SZX7

3Observation procedure

Ref. Page

1. Confirm the mounting, particularly that of the observation tube. .......................................................................................................................................Page 16 to 18

2. Adjust the rotation tension of the focus adjustment knob. ..........................................................................................................................................................................Page 6

3. Prepare the light source as required.

If you have not assembled the microscope yet, please read “8 Assembly” (P. 16) (page 16 to 18).

TIP

3-2 Procedure

3-1 Reparation

Place the specimen on the stage. (Page 6)

Adjust the interpupillary distance. (Page 6)

Adjust the eyepiece diopter. (Page 7)

(The adjustment operation is variable whether the eyepieces

use an eyepiece micrometer disk or not. )

Set the zoom adjustment knob afor the lowest magnification and

rotate the focus adjustment knob bto bring the specimen into

approximate focus.

Rotate the zoom adjustment knob ato the target magnification

and rotate the focus adjustment knob bto bring the specimen into

accurate focus.

When the optional AS unit (SZX-AS) is used, the contrast of

image and the focal depth of specimen can be adjusted with

the aperture iris diaphragm lever.

TIP

Downloaded from ManualsNet.com search engine

4 Operation

4-1 Stand

When reflected light illumination is used, the stage plate can be

placed either the white or black surface facing up depending on the

specimen. However, when the ESD performance is required, always

use the black surface of the stage plate.

When transmitted light illumination is used, use the transparent glass

stage plate (SP-C).

This operation is intended to facilitate the rotation of the

knobs while preventing spontaneous drop of the microscope

body. It is recommended to set the knob tension to a slightly

higher level than the point where spontaneous drop occurs.

Hold the left and right focus adjustment knobs awith both hands,

fix the left knob and rotate the right knob. The rotation tension of the

knobs increases or decreases according to the direction in which the

right knob is rotated.

If the rotation tension is increased too much, accurate focusing is not

possible and the mechanism may be damaged.

TIP

1Using the stage

Adjusting the tocus adjustment knob tension

To decrease

To increase

Clamp

Always hold the eyepiece sleeves awith both hands

when adjusting the interpupillary distance.

While holding the left and right eyepiece sleeves awith both hands,

look through the eyepieces and adjust for binocular vision until the

left and right fields of view coincide completely.

NOTE

1Adjusting the interpupillary distance

4-2 Observation tube

Downloaded from ManualsNet.com search engine

Andere Handbücher für SZX7

Inhaltsverzeichnis

Andere Olympus Mikroskop Handbücher

Olympus

Olympus CH30 Bedienungsanleitung

Olympus

Olympus FH Bedienungsanleitung

Olympus

Olympus DSX1000 Bedienungsanleitung

Olympus

Olympus BX61 Bedienungsanleitung

Olympus

Olympus BHSU Montageanleitung

Olympus

Olympus U-MDOB3 Bedienungsanleitung

Olympus

Olympus BHSP Bedienungsanleitung

Olympus

Olympus BX53-P Bedienungsanleitung

Olympus

Olympus BX-RLA2 Bedienungsanleitung

Olympus

Olympus MX50A/T Bedienungsanleitung

Olympus

Olympus JM Bedienungsanleitung

Olympus

Olympus DP22 Bedienungsanleitung

Olympus

Olympus BX41 Bedienungsanleitung

Olympus

Olympus U-FWT Bedienungsanleitung

Olympus

Olympus DP73 Bedienungsanleitung

Olympus

Olympus U-CBS Bedienungsanleitung

Olympus

Olympus BH2 Series Montageanleitung

Olympus

Olympus BXFMA Bedienungsanleitung

Olympus

Olympus IX81 Bedienungsanleitung

Olympus

Olympus MVX10 Bedienungsanleitung

Olympus

Olympus CKX31 Betriebsanleitung

Olympus

Olympus CH2 Series Betriebsanleitung

Olympus

Olympus CHA-P Bedienungsanleitung

Olympus

Olympus POS Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Leica

Leica FL560 Bedienungsanleitung