Olympus MVX10 Bedienungsanleitung

INSTRUCTIONS

MVX10

A X 7 4 4 1

This instruction manual is for the Olympus MVX Research Macro Zoom System Microscope. To

ensure the safety, obtain optimum performance and familiarize yourself fully with the use of this

attachment, we recommend you study this manual thoroughly before operating the microscope.

Retain this instruction manual in an easily accessible place near the work desk for future reference.

RESEARCH MACRO ZOOM

SYSTEM MICROSCOPE

MVX10

MVX-2RE

MVX-CA2X

SZX-STAD1

SZH-STAD1

SZX-STAD2

SZ2-FO

SZH-SG

SZH-SC

Main modules described in this manual

MVX10

CONTENTS

IMPORTANT — Be sure to read this section for safe use of the equipment. —

1 NOMENCLATURE

2 CONTROLS

4 OPERATION

SUMMARY OF REFLECTED FLUORESCENT LIGHT OBSERVATION PROCEDURE

4-1 Base ....................................................................................................................................................................................................................... 10

4-2 Microscope Body and Focusing Assembly.......................................................................................... 10,11

4-3 Coaxial Fluorescence Illuminator..................................................................................................................... 12-15

4-4 Observation Tube ...................................................................................................................................................................... 15-17

1Using the Stage Plate 2Placing the Specimen

1-4

Correct assembly and adjustments are indispensable for the microscope to manifest its full performance. If you

want to assemble the microscope by yourself, refer to Chapter 11, “ASSEMBLY” before other chapters. (P. 36 to P. 43)

5 TV OBSERVATION AND PHOTOMICROGRAPHY 18,19

6,7

8,9

10-17

1Adjusting the Focus

2 Adjusting the Rotation Tension of the Coarse Focus Adjustment Knob

3Engaging and Disengaging the Zooming Knob Click Stop Position

4Adjusting the Aperture Iris Diaphragm 5Using the Objective Correction Collar

1Selecting the Fluorescence Mirror Unit 2Turning the Burner ON

3Opening/Closing the Shutter 4Using the Field Iris Diaphragm

5Switching the Filter Slider Knob

1Adjusting the Tilt 2Adjusting the Interpupillar Distance

3Adjusting the Diopter (Zoom Parfocality Adjustment)

4Using the Eye Shades 5

Mounting the Eyepiece Micrometer Disk

6Selecting the Light Path 7Switching the Monaural/Stereo View

1Selecting the Camera Adapter Magnification

2Attaching the Camera Adapter 3Selecting the TV Camera Light Path

4Adjusting the Parfocality Between Observation Image and Monitor Image

6 TRANSMITTED LIGHT OBSERVATION 20

7 TROUBLESHOOTING GUIDE

8 SPECIFICATIONS

9 OPTICAL CHARACTERISTICS

PROPER SELECTION OF THE POWER SUPPLY CORD .................................................................. 46,47

24-35

OPERATION OF OTHER MODULES

10-1 Revolving Nosepiece MVX-2RE....................................................................................................................... 24,25

10-2 Magnification Changer MVX-CA2X...................................................................................................................... 26

10-3 BX Stage Adapter Type 1 SZX-STAD1 .................................................................................................... 27-29

10-4 Stage Adapter Type 1 SZH-STAD1 ....................................................................................................................... 29

10-5 BX Stage Adapter Type 2 SZX-STAD2 .................................................................................................... 30,31

10-6 Vertical-Movement Stage SZ2-FO................................................................................................................ 31-33

10-7 Gliding Stage SZH-SG ................................................................................................................................................... 33,34

10-8 Cup Stage SZH-SC............................................................................................................................................................. 34,35

ASSEMBLY 36-45

11-1 Assembly Diagram ...................................................................................................................................................................... 36

11-2 Detailed Assembly Procedures ....................................................................................................................... 37-43

11-3 Centration of the Mercury (Xenon) Burner and Field Iris Diaphragm....... 44,45

MVX10

IMPORTANT

SAFETY PRECAUTIONS

1. After observation of a specimen that involves the risk of infection, be sure to clean the positions that contacted the

specimen to prevent infection.

· To avoid the risk that the specimen drops and splatters, be sure to remove the specimen before moving the microscope.

· If a specimen is destroyed due to an erroneous operation, immediately take the infection prevention measures.

· The microscope becomes unstable when its height is increased by a mounted attachment. To prevent the specimen

from dropping if the microscope topples down, be sure to take the toppling prevention measures when mounting an

attachment.

2. The applicable ultrahigh-pressure mercury burners are the USH-103OL (OLYMPUS) and HBO103W/2 (OSRAM), both of

which are DC mercury burners available from Olympus.

3. Ensure that the burners are mounted and that the cords are connected securely.

4. The inside of the lam housing is very hot while the burner is on and immediately after it is turned off. Do not open the lamp

housing in these periods (see page 42).

5. The power supply unit contains high-voltage parts inside. Do not attempt to disassemble it.

6. Always use the power cord provided by Olympus. If no power cord is provided, please select the power cord by referring

to the section “PROPER SELECTION OF THE POWER SUPPLY CORD” at the end of this instruction manual. If the proper

power cord is not used, Olympus can no longer warrant the electrical safety performance of the equipment.

Before plugging the power cord into the wall outlet, ensure that the main switch of the power supply unit is set to “ ”

(OFF).

7. Always ensure that the grounding terminal of the power supply unit is properly grounded. If the equipment is not grounded,

Olympus can no longer warrant the electrical safety performance of the equipment.

8. Before opening the lamp housing for replacing the burner, be sure to set the main switch to “ ” (OFF), unplug the lamp

housing output connector of the power supply unit and wait at least 10 minutes or until the burner and lamp housing

have cooled down.

9. The top of the lamp housing becomes very hot. To avoid the risk of a fire, never block the ventilation of this part.

Make sure you leave a space of 10 cm or more around the lamp housing and power supply unit to dissipate heat.

10. The power cord is also used to shut off the power supply unit in case of emergency by unplugging. To facilitate this, locate

the power supply unit or wall outlet so that the power cord connector (on the rear of the power supply unit) or the wall

outlet is easily accessible in case of emergency.

Safety Symbols

Symbol Explanation

The following symbols are found on the microscope. Study the meaning of the symbols and always use the equipment

in the safest possible manner.

Indicates the presence of a high voltage (1 kV or more), which should not be touched to

prevent an electric shock.

Indicates that the surface becomes hot, and should not be touched with bare hands.

Before use, carefully read the instruction manual. Improper handling could result in injury to

the user and/or damage to the equipment.

Indicates that the main switch is ON.

Indicates that the main switch is OFF.

Caution indications

Caution indications are affixed at parts where special precaution is required when handling and using the microscope.

Always heed the cautions.

Caution indication

positions

· Lamp housing [High temperature caution]

(U-LH100HG, U-LH10HGAPO)

· Power supply unit [High voltage caution]

}This instruction manual pertains only to the operating procedures of the Research Macro Zoom System. Also read the

instruction manuals for the modules used in combination with the microscope system so that you can understand the

comprehensive operating procedures of the system.

1. A microscope is a precision instrument. Handle it with care and avoid

subjecting it to sudden or severe impact. Also be careful in handling

the limiting or stopper mechanisms because an excessive force may

destroy them.

2. Do not use the microscope where it is subjected to direct sunlight, high

temperature and humidity, or vibration.(For the operating environment,

see Section 8, “SPECIFICATIONS” on page 22.)

3. To prevent the microscope body from turning over, its pivot angle

must be limited to 30° and the tilt angle of the desk surface must

be limited to 5° as shown in Fig.1.

4. Care is required when using an auxiliary pillar (SZH-P400/P600) because

it increases the height of the microscope body and makes it unstable.

5. To adjust the microscope body height, be sure to hold the focusing

assembly with one hand and then loosen the focusing assembly

clamping knob @. (Fig. 1)

(Use the drop prevention collar (SZX-R) to prevent a hazard from

occurring.)

Be careful not to pinch your finger during adjustment.

1Getting Ready

Fig. 1

MVX10

1. To clean the lenses and other glass components, simply blow dirty away using a commercially available blower and

wipe gently using a piece of cleaning paper (or clean gauze).

If a lens is stained with fingerprints or oil smudges, wipe it gauze slightly moistened with commercially available

absolute alcohol.

Since the absolute alcohol is highly flammable, it must be handled carefully.

Be sure to keep it away from open flames or potential sources of electrical sparks -- for example, electrical

equipment that is being switched on or off.

Also remember to always use it only in a well-ventilated room.

2. The equipment uses plastic resins extensively in its external finish. Do not attempt to use organic solvents to clean the

non-optical components of the microscope. To clean these components, use a lint-free, soft cloth lightly moistened with

a diluted neutral detergent.

3. Never disassemble any part of the microscope as this could result in malfunctions or reduced performance.

4. When not using the microscope, keep it covered with the dust cover provided. Ensure that the lamp housing is cool

before covering the microscope.

5. When the hour counter on the power supply unit indicates 300 hours (USH-103OL, HBO103W/2), set the main switch

to “ ” (OFF) for safety, wait for more than 10 minutes and then replace the burner (see page 42). Unlike the fluorescent

lamps, the mercury burner seals high-pressure gas inside. If it used after the specified service life has been exceeded,

the glass tube may be distorted accumulatively and may eventually burst, though this happens very rarely. The used

mercury burner should be disposed of as an industrial waste. If you cannot dispose of it properly, contact Olympus.

6. When disposing of the microscope. Check the regulations and rules of your local government and be sure to observe

them. To dispose of only the gas spring (|, Fig. 2) used in the counterbalance of the focusing assembly, follow the

precautions provided with the gas spring.

6. Observe the following cautions when operating the coarse focus

adjustment knobs or the zooming knobs.

1. If the knob hits the upper or lower lim-

iting mechanism violently or it is rotated

after it hits a limiting mechanism, the

internal mechanism may be damaged.

Fig. 2

Operation Manipulated

Controls Caution

Focusing Coarse focus

adjustment

knobs @ (Fig. 2)

2. If the knobs on the left and right are

rotated in opposite directions, the in-

ternal mechanism will be damaged.

(The rotation tension of the knob

should be adjusted using the rotation

tension adjustment ring ³ on the

knob. See page 10.)

Zooming knobs

² (Fig. 2)

1. If the knob hits the upper or lower lim-

iting mechanism violently or it is rotated

after it has hit a limiting mechanism,

the internal mechanism may be dam-

aged.

2. If the knobs on the left and right are

rotated in opposite directions, the inter-

nal mechanism will be damaged.

7. Before moving the microscope, detach the modules including the tilting

trinocular head and lamp housing to reduce the total weight. Then hold

it by the base, not by the zoom microscope body.

Zooming

2Maintenance and Storage

If the microscope is used in a manner not specified by this manual, the safety of the user may be imperiled. In addition,

the microscope may also be damaged. Always use the microscope as outlined in this instruction manual.

3Caution

The following symbols are used to set off text in this instruction manual.

: Indicates that failure to follow the instructions in the warning could result in bodily harm to the

user and/or damage to equipment (including objects in the vicinity of the equipment).

# : Indicates that failure to follow the instructions could result in damage to equipment.

} : Indicates commentary (for ease of operation and maintenance).

4Intended use

This instrument has been designed to be used to observe magnified images of specimens in routine and research

applications.

Do not use this instrument for any purpose other than its intended use.

MVX10

NOMENCLATURE

}The module names listed below are typical ones that can be used with the system, and the illustration shows the system

composed of modules marked {. Certain other modules are also usable even when they are not mentioned below. For

these modules, refer to the latest catalogues or contact Olympus.

For the modules marked *, refer to their instruction manuals.

Observation Tube

{ Tilting Trinocular Head: MVX-TTRS

· Tube Lens Unit: MVX-TLU

Eyepieces

{ WHN10X-H

Coaxial Fluorescence Illuminator

{ MVX-RFA

<< Fluorescence mirror units >>

· U-MCFPHQ/XL

· U-MGFPHQ/XL

· U-MYFPHQ/XL

· U-MRFPHQ/XL

· U-MGFP/XL

· U-MGFPA/XL

Objective Lens

{ MVPLAPO 1X

· MVPLAPO 0.63X

· MVPLAPO 2XC

Camera Adapter

{ MVX-TV 1XC

· MVX-TV 0.63XC

· MVX-TV1XB

High-Intensity Lamp Housing

· U-LH100HG (for mercury burner)

· U-LH100HGAPO (for mercury burner)

· U-LH75XEAPO*(for xenon burner)

ND Filter

· 32ND6

· 32ND12

· 32ND25

· 32ND50

Focusing Assembly

{ MVX-FOF

Revolving Nosepiece

· MVX-2RE

Base

{ Transmitted Illumination Base : SZX-ILLB2*

· Transmitted Illumination Base : SZX-ILLD2*

· Transmitted Illumination Base : SZX-ILLK*

· Large Base : SZX-STL

Stage Glass & base accessories

{ Stage Glass: SP-C

· Fluorescence Center Plate: SP-FL

· Stage Plate (B&W): SP-BW-2

· Base accessories

Zoom Microscope Body

{ MVX-ZB10

Magnification Changer

· MVX-CA2X

Liquid light guide adapter

{ U-LLGAD

}If the microscope is not yet assembled, go to Chapter 11, “ASSEMBLY” (pages 36 to 45).

The following illustration shows the systems with the modules enclosed in . For other ancillary modules, see

subsequent pages.

Tilting Trinocular Head

MVX-TTRS

CONTROLS

Coaxial Fluorescence Illuminator

MVX-RFA

Diopter adjustment ring

(P. 16)

Eyepiece clamping knobs

Mirror unit turret (P. 12)

Mirror unit indicator pocket (P. 38)

Zooming knob (P. 16)

Aperture iris diaphragm knob

(P. 11)

Zoom ratio indicator (P. 11)

Zoom Body

MVX-ZB10

UV shield plate

MVX objective

Camera Adapter

MVX-TV 1XC

Light path selector lever (P. 17)

Mono/stereo selector lever (P. 17)

Lamp Housing for Mercury Burner

U-LH100HG/U-LH100HGAPO

Burner centering knobs

(P. 44)

Collector lens focusing

knob (P. 44)

Filter slider knob (P. 15)

Field iris diaphragm lever (P. 14)

Coarse focus adjustment knob (P. 10)

Fine focus adjustment knob (P. 10)

Coarse focus adjustment knob rotation

tension adjustment ring (P. 10)

Shutter knob (P. 14)

Transmitted Illumination Base

SZX-ILLB2

(Refer to the separate instruction manual.)

Focusing Assembly

MVX-FOF

Inhaltsverzeichnis

Andere Olympus Mikroskop Handbücher

Olympus

Olympus SZ-III Bedienungsanleitung

Olympus

Olympus SZX-AR1 Referenzhandbuch

Olympus

Olympus FH Bedienungsanleitung

Olympus

Olympus MX63 Bedienungsanleitung

Olympus

Olympus VS120 Betriebsanleitung

Olympus

Olympus SZ-ADD Bedienungsanleitung

Olympus

Olympus BH2-5RE Montageanleitung

Olympus

Olympus BX51 Bedienungsanleitung

Olympus

Olympus DP22 Bedienungsanleitung

Olympus

Olympus ORBEYE Handbuch

Olympus

Olympus VMF Bedienungsanleitung

Olympus

Olympus BX51 Bedienungsanleitung

Olympus

Olympus CX21 Bedienungsanleitung

Olympus

Olympus Fluoview FV1000 Handbuch

Olympus

Olympus Fluoview FV1000 Installationsanleitung

Olympus

Olympus DP71 Bedienungsanleitung

Olympus

Olympus IX2-RFSPOT Bedienungsanleitung

Olympus

Olympus SZX16 Bedienungsanleitung

Olympus

Olympus FV1200 MPE Bedienungsanleitung

Olympus

Olympus SZX-DA Bedienungsanleitung

Olympus

Olympus ST. HS Bedienungsanleitung

Olympus

Olympus BX51 Bedienungsanleitung

Olympus

Olympus X-Tr Betriebsanleitung

Olympus

Olympus VS120 Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Leica

Leica FL560 Bedienungsanleitung