Panasonic MC-CJ917-K747 Bedienungsanleitung

ing and distribution is a violation of law.

Order Number VCB1109004CE

Vacuum Cleaner

Model No. MC-CJ917-K747

MC-CJ917-K149

MC-CJ917-K147

MC-CJ917-W747

MC-CJ917-W149

MC-CJ917-W147

Product Color : (K) Black , (W) White

Destination :

1.Saudi Arabia, Kuwait

MC-CJ917-K747

MC-CJ917-W747

2.Iran

MC-CJ917-K149

MC-CJ917-W149

3.UAE

MC-CJ917-K147

MC-CJ917-W147

TABLE OF CONTENTS

PAGE PAGE

1 Specifications ------------------------------------------------------3

2 Location of Controls and Components--------------------4

3 Troubleshooting Guide------------------------------------------5

4 Disassembly and Assembly Instructions-----------------7

4.1. Disassembly of the Dust Cover Assy -----------------7

4.2. Disassembly of the Dust Bag Holder------------------8

4.3. Disassembly of Body Cover Assy, Switch

Pedal, Cord Rewind Button------------------------------9

4.4. Disassembly of Upper Body, Handle Cover,

and Guide Lever------------------------------------------ 10

4.5. Disassembly of Motor Case Set---------------------- 12

4.6. Disassembly of Cord Reel Unit ----------------------- 12

4.7. Disassembly of Rail Base Unit------------------------ 13

4.8. Disassembly of Motor Assy---------------------------- 13

4.9. Disassembly of P.C.B. Assy --------------------------- 15

4.10. Replacement of Blower Cover ------------------------ 17

5 Wiring Connection Diagram --------------------------------- 18

6 Exploded View and Replacement Parts List ----------- 19

6.1. EXPLODED VIEW (ATTACHMENTS) -------------- 19

6.2. PARTS LIST (ATTACHMENTS) ---------------------- 20

6.3. EXPLODED VIEW (BODY UNIT)-------------------- 21

6.4. PARTS LIST (BODY UNIT)---------------------------- 22

1 Specifications

2 Location of Controls and Components

3 Troubleshooting Guide

CONDITION CHECKPOINT FIGURE CHECK METHOD REMEDY

The Motor

doesn’t rotate.

CORD REEL

UNIT

RAIL BASE

UNIT

• Check the continuity at both

ends of the Plug and both ends

of the Lead Wire Terminal of

the Cord Reel Unit. (Discon-

nection check)

• There must be no problems

between the Cord Reel Unit

and the Rail Base Unit (e.g.

burns in the contact, entry of

dust).

• If there is no continuity, replace

the Cord Reel Unit, or the Rail

Base Unit.

MOTOR • Check the continuity between

the terminals of the Motor.

• Confirm that the Motor can be

rotated by fingers without being

locked.

• Visually check for burns in the

Motor (e.g. burns in the coil).

• If there is a problem, replace

the Motor Assy.

* Also check and replace

the Fuse.(on the P.C.B.

Assy)

FUSE • Check if the Fuse has blown.

Causes of fuse blowing:

1. Overcurrent

2. Burn of the Motor

3. Short-circuiting due to

incorrect wiring

• If the Fuse has blown, remove

the cause and replace the

Fuse.

*If a burn in the Motor caused

the Fuse to blow, then also

replace the Motor.

P.C.B. ASSY • Check the internal components

for problems.

(Burnt, melted, broken, etc.)

• There must be no broken foil of

the Printed Circuit Board.

• There must be no breaks in the

Lead Wires.

• If there is a problem, replace

the P.C.B. Assy.

TRIAC (on the

P.C.B. Assy)

• Check the Triac by conducting

the following inspection.

• If there is a problem, replace

the P.C.B. Assy.

ON/OFF

SWITCH

(in the P.C.B.

Assy)

• Check the continuity by press-

ing the On/Off Switch.

• If there is a problem, replace

the P.C.B. Assy.

1. The Motor

doesn’t rotate.

2. The Power

Control doesn't

function.

TRIAC (on the

P.C.B. Assy)

• Check that the Triac has not

been short-circuited.

If there is continuity between

T1 and T2, then there is a

problem in the components.

• If there is a problem, replace

the P.C.B. Assy.

POWER CON-

TROL VOL-

UME (in the

P.C.B. Assy)

• The resistance between A and

B must be switchable.

0~470Ω

• If there is a problem, replace

the P.C.B. Assy.

The Cord cannot

be pulled out.

CORD REEL

UNIT

MOTOR CASE

UNIT

• If the Cord cannot be pulled

out, press the Brake Lever and

confirm that the Cord can be

rewound.

Repeat operations to rewind

and pull out the Cord two or

three times and confirm that it

can be normally rewound.

• If it is impossible to resolve the

problem due to an abnormal

condition of the Cord, separate

the Body, untwist the Cord, and

rewind it. Or, replace the Cord

Reel Unit and rewind the Cord.

1. The Cord can-

not be rewound.

2. The pulled out

Cord cannot be

locked.

Separate the Body and;

• Confirm that a sufficient num-

ber of spare turns have been

made.

• Confirm that the Cord Reel

Spring is working.

• Confirm that the Brake Lever

Unit is working correctly to stop

the Cord from rewinding.

• Make spare turns according to

the engraved number of turns,

or;

Replace the Cord Reel Unit.

Replace the Motor Case Unit.

1. The suction

power is low.

2. The Motor

stops during

vacuuming.

(The Thermo

Protector in the

Motor Assy

works.)

DUST BAG

FILTER

EXTENSION

WAND UNIT

HOSE UNIT

Check for clogging with dust.

•DustBag

• Filter (in the Dust Box)

• Hose Unit

• Extension Wand Unit

Remove dust.

• Replace any broken Dust Bag,

Filter, and/or Hose Unit.

CONDITION CHECKPOINT FIGURE CHECK METHOD REMEDY

4Disassembly and Assembly Instructions

Important: Always turn the vacuum cleaner is power off before replacing components.

Remove the power cord and plug from the mains.

* Attention

(1) When disassembling the vacuum cleaner, check the connections and wiring (pulling) of each component, and ensure that everything

is restored correctly once repairs are complete.

(2) Handle all disassembled components and packing with care, and be sure to replace any components that may be accidentally dam-

aged.

(3) Once repair operations are complete, always inspect the area around the repairs for any degradation, and ensure that all compo-

nents that were removed for repair have been replaced in the correct wiring configurations. It is also necessary to test the operation of

the vacuum cleaner and ensure that it is safe for subsequent use.

･ Insulation resistance:

Must be at least 5MΩ when a direct current of 500V is applied between the power plug terminals and the exterior of the motor.

･ Dielectric strength:

Must be able to withstand 1250V of alternating current applied between the power plug terminals and the exterior of the motor for

one minute.

(4) Do not make changes to models, components, or materials during repairs and services.

(5) If a wiring unit has been supplied as a spare part, the wiring unit must be simply replaced as it is, without any additional repairs or

connections made to even part of the wiring.

(6) Insert/remove the fast-on terminals by pushing/pulling them straight out without jiggling them or applying unnecessary force.

4.1. Disassembly of the Dust Cover Assy

1. Open the Dust Cover Assy and insert a slotted screwdriver in the gap between the Dust Cover Assy and the Upper

Body.

Move the slotted screwdriver in the direction of the arrow, and disassemble the Dust Cover Assy pulling upward.

Fig.1

4.2. Disassembly of the Dust Bag

Holder

1. Remove the Dust Bag Holder by inserting a slotted

screwdriver into the mount of the Dust Bag Holder on

the Lower Body Unit.

Fig.2

Caution (There is a Spring inside)

* When replacing the Dust Bag Holder, disassemble

and replace the Spring mounted inside.

Fig.3

4.3. Disassembly of Body Cover Assy, Switch Pedal, Cord Rewind Button

1. Remove the Filter Case

Fig.4

2. Remove 3 screws and disassemble the Body Cover Assy

Fig.5

3. Disassemble the Switch Pedal/Cord Rewind Button

toward the direction of the arrow

Caution: (Spring is placed inside.)

*Be careful not to lose the Spring.

Fig.6

4.4. Disassembly of Upper Body,

Handle Cover, and Guide Lever

1. Disassemble the Body Cover Assy and Switch Pedal as

described in (4.3).

Fig.7

2. Remove the Switch (part of the P.C.B. Assy) from the

Upper Body by pressing the tab in direction of the

arrow.

Fig.8

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Staubsauger Handbücher

Panasonic

Panasonic MC-3920 TAIWAN Bedienungsanleitung

Panasonic

Panasonic MC-E464 Bedienungsanleitung

Panasonic

Panasonic MCCL485 - CANISTER VACUUM - MULTI LANGUAGE Bedienungsanleitung

Panasonic

Panasonic MCUG583 - PLATINUM UPRIGHT VACUUM Bedienungsanleitung

Panasonic

Panasonic MC-V5004 Bedienungsanleitung

Panasonic

Panasonic MC-E470 Bedienungsanleitung

Panasonic

Panasonic MC-CL481 Bedienungsanleitung

Panasonic

Panasonic MC-SB53K Bedienungsanleitung

Panasonic

Panasonic MC-E4051-00 Bedienungsanleitung

Panasonic

Panasonic MC-BJ870 Bedienungsanleitung

Panasonic

Panasonic MC-GG523-00 Bedienungsanleitung

Panasonic

Panasonic MC-CL575 Bedienungsanleitung

Panasonic

Panasonic MC-CG677-SC79 Bedienungsanleitung

Panasonic

Panasonic MC-CG383 Bedienungsanleitung

Panasonic

Panasonic QuickDraw MC-V6950 Bedienungsanleitung

Panasonic

Panasonic MCV7398 - UPRIGHT VACUUM Bedienungsanleitung

Panasonic

Panasonic MC-YL625T147-AE Bedienungsanleitung

Panasonic

Panasonic MC-CL789 Bedienungsanleitung

Panasonic

Panasonic MC-YL799-N147 Bedienungsanleitung

Panasonic

Panasonic Ultra-Pro MC-V300 Bedienungsanleitung

Panasonic

Panasonic MC-CG691 Bedienungsanleitung

Panasonic

Panasonic MC-YL699-S146 Bedienungsanleitung

Panasonic

Panasonic MCV5258 - UPRIGHT VACUUMC-PLAT Bedienungsanleitung

Panasonic

Panasonic MCU-L426 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch

Craftsman

Craftsman CMCVS001D1 Bedienungsanleitung