ParaBody 880 Bedienungsanleitung

881 LEG PRESS ADAPTER KIT

FOR 880 GYM SYSTEM

CLASSH

PART # 7168701

REV. C

Version: 881102

Revision: 3/08/02

USER’S GUIDE

WARNING:

Read and follow all directions

for each step to insure proper

assembly of this product.

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions

on the use of this machine. Use only for intended

exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any

exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it

appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody

dealer before use and have repairs made by an

authorized service technician.

5. Be certain that weight pin is completely inserted.

Use only the pin provided by the manufacturer. If

unsure, call your authorized ParaBody dealer.

6. Never pin the weights or prop plate into an elevated

position. DO NOT use the machine if found in this

condition. DO NOT attempt to fix. Notify your

authorized ParaBody dealer.

7. Inspect cables and their connections before using

machine. Pay particular attention to the cable ends.

DO NOT attempt to fix. Notify your authorized

ParaBody dealer before use and have repairs made by

an authorized service technician.

8. Make sure all spring loaded pull pins are fully

engaged in the adjustment position and fully tighten

thumbscrew before use.

9. Children must not be allowed near this machine.

Supervise teenagers.

IMPORTANT SAFETY INFORMATION

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

NOTE: In a continual effort to improve our products, specifications are subject to change

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

Parts list..........................4

Assembly Instructions.....5-26

Insert-Registration Card

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the ParaBody 881 LEG PRESSADAPTER KIT. Please read these

instructions thoroughly and keep them for future reference. This product must be assembled

on a flat, level surface to assure its proper function.

* 9/16” wrench

* Ratchet with 9/16” socket and 6” Ratchet extension

* Adjustable wrench

* Tape measure

NOTE:BOLTLENGTHISMEASUREDFROMTHEUNDERSIDEOFTHEHEADOFTHEBOLT.

BOLTLENGTHRULER:

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT

securely tighten any frame connections until the entire frame has been assembled, unless

otherwise stated.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

PARTS LIST

PART #

7160008

7156001

7156102

3116201

3102501

3102802

3102924

3102922

3102905

3102935

KEY

QTY

PART #

6533501

3102807

6122701

6480301

7242408

7245008

6995708

3102904

3102955

DESCRIPTION

CABLE CLIP

3/8” LOW HEIGHT LOCK NUT

3/8 X 1” SPACER

3/8” FLANGE SPACER

PULLEYBRACKET

PULLEYL-BRACKET

PULLEYPLATE

3/8 X 3”BOLT

3/8” X 4-1/4” BOLT

QTY

DESCRIPTION

LEG PRESSADAPTER

SHORT LEG PRESS CABLE

LONG LEG PRESS CABLE

3-1/2” PULLEY

3/8” WASHER

3/8” LOCKNUT

3/8 X 1-3/4” BOLT

3/8 X 2-3/4” BOLT

3/8 X 3-3/4” BOLT

3/8 X 4-1/2” BOLT

KEY

NOTE: The LEG PRESS ATTACHMENT (100102) must be assembled before

connecting it to the PARABODY 880 GYM SYSTEM

• NOTE: If assembling the LEG PRESS OPTION to a completely assembled (including cables) 880 GYM

SYSTEM without SECOND STACK OPTION , please refer to PAGE 5.

• NOTE: If assembling the LEG PRESS OPTION to a completely assembled (including cables) 880 GYM

SYSTEM with SECOND STACK OPTION , please referto PAGE 18.

• NOTE: It is recommeded that the SECOND STACK OPTION is assembled before the LEGPRESS

OPTION.

STEP 1:

FIGURE 1

0123456

1/2 1/2 1/2 1/2 1/2 1/2

• REMOVE the LAT CABLE, THREADED HOUSING, 3/8 X 3-3/4” BOLT, two 3/8 X 1” SPACERS and one 3/8” LOCK NUT from

the 880 GYM SYSTEM. See FIGURE 1. Save the LAT CABLE if you ever plan to purchase the SECOND STACK OPTION.

Discard the 3/8 X 1” SPACERS. (NOTE: Remove pulleys for ease of removal.)

• NOTE: Follow these steps if assembling the LEG PRESS OPTION to a completely assembled (including cables) 880

GYM SYSTEM without SECOND STACK OPTION, otherwise if the SECOND STACK OPTION is assembled please

refer to PAGE 18.

THREADED

HOUSING

3/8 X 3-3/4”

BOLT

3/8 X 1”

SPACER

3/8”

LOCK

NUT

STEP 2:

FIGURE 2

• Remove the PEC STATION PAD from the FRAME, then discard the two 3/8 X 2-3/4” BOLTS. See FIGURE 2.

3/8 X 2-3/4”

STEP 3:

FIGURE 3

• SECURELY assemble the PULLEY BRACKET(15) and the PEC STATION PAD to the FRAME using two 3/8 X 3” BOLTS (18). See

FIGURE 3.

18 3/8 X 3”

3/8” WASHER

PECSTATION PAD

FRAME

PECSTATION PAD

FRAME

0123456

1/2 1/2 1/2 1/2 1/2 1/2

STEP 4:

FIGURE 4

• Remove the two 3/8 X 4” BOLTS, four 3/8” WASHERS and two 3/8” LOCK NUTS from the REAR UPRIGHT as shown in

FIGURE 4. Discard the 3/8 X 4” BOLTS.

3/8 X 4” BOLTS

STEP 5:

FIGURE 5

• SECURELY assemble the PULLEY L-BRACKET (16) to the REAR UPRIGHT using two 3/8 X 4-1/4” BOLTS (19), four

previously removed 3/8” WASHERS and two previously removed 3/8” LOCK NUTS as shown in FIGURE 5.

REAR UPRIGHT

19 3/8 X 4-1/4”

REAR UPRIGHT

STEP 6:

FIGURE 6

• Route the SHORT LEG CABLE (2) through the FRAME and BOOM BRACKET as shown in FIGURE 4. (NOTE: Remove

pulleys for ease of installation.)

FRAME

BOOM

BRACKET

0123456

1/2 1/2 1/2 1/2 1/2 1/2

STEP 7:

FIGURE 7

• Route the SHORT LEG PRESS CABLE (2) through the PULLEYPLATES as shown in FIGURE 7.

3/8 X 1-3/4” 7

• Route the SHORT LEG PRESS CABLE (2) around one 3-1/2” PULLEY (4) and assemble the PULLEY to the PULLEYBRACKET

(15) using one 3/8 X 1-3/4” BOLT (7) and one previously removed 3/8” LOCK NUT. See FIGURE 7.(Note: Loop the SHORT

LEG CABLE (2) around the PULLEY prior to assembling the PULLEY to the PULLEY BRACKET.)

3/8” LOCK NUT

PULLEY

PLATES

STEP 8:

FIGURE 8

• Remove the 3-1/2” PULLEY, one 3/8 X 3-3/4” BOLT, two 3/8 X 1” SPACERS and one 3/8” LOCK NUT from the BASE PLATES as

shown in FIGURE 8. Discard one of the 3/8 X 1” SPACERS.

3/8 X 3-3/4”

BASEPLATES

0123456

1/2 1/2 1/2 1/2 1/2 1/2

STEP 9:

FIGURE 9

• SECURELYassemble the previously removed 3-1/2” PULLEY, one previously removed 3/8 X 1” SPACER and one 3-1/2” PULLEY

(4) to the BASE PLATES using one previously removed 3/8 X 3-3/4” BOLT and one 3/8” LOCK NUT. See FIGURE 9.(Note: Loop

the SHORT LEG PRESS CABLE (2) around the PULLEY prior to assembling the PULLEY to the BASE PLATES.)

3/8 X 3-3/4”

BASEPLATES

Andere Handbücher für 880

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ParaBody Fitnessgeräte Handbücher

ParaBody

ParaBody 661101 Bedienungsanleitung

ParaBody

ParaBody 704101 Montageanleitung

ParaBody

ParaBody Parabody 844 Lat Option Bedienungsanleitung

ParaBody

ParaBody 823 Bedienungsanleitung

ParaBody

ParaBody 893102 Montageanleitung

ParaBody

ParaBody 821 Bedienungsanleitung

ParaBody

ParaBody 827103 Bedienungsanleitung

ParaBody

ParaBody 877 Montageanleitung

ParaBody

ParaBody 843 Bedienungsanleitung

ParaBody

ParaBody 705101 Montageanleitung

ParaBody

ParaBody 8661O2 Bedienungsanleitung

ParaBody

ParaBody 493 Montageanleitung

ParaBody

ParaBody 811101 Montageanleitung

ParaBody

ParaBody 875 Montageanleitung

ParaBody

ParaBody 856 Bedienungsanleitung

ParaBody

ParaBody 838 Bedienungsanleitung

ParaBody

ParaBody 883101 Bedienungsanleitung

ParaBody

ParaBody 830 Bedienungsanleitung

ParaBody

ParaBody 837101 Bedienungsanleitung

ParaBody

ParaBody 874106 Bedienungsanleitung

ParaBody

ParaBody 835101 Montageanleitung

ParaBody

ParaBody 858102 Montageanleitung

ParaBody

ParaBody 476 Montageanleitung

ParaBody

ParaBody 827 LAT MACHINE Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung

SteelFlex

SteelFlex PLHP Kurzanleitung