ParaBody 661101 Bedienungsanleitung

661101 LEG PRESSADAPTER KIT

Part #7049801

Rev. B Revision: 07/19/011

ASSEMBLY INSTRUCTIONS

IMPORTANT NOTES

Please note:

Tools Required forAssembly

* Thank you for purchasing the 661101 Leg PressAdapter Kit. Please read these

instructions thoroughly and keep them for future reference. This product must be assembled

on a flat, level surface to assure its proper function.

* Rubber mallet or hammer

* 3/4” wrench

* 9/16” wrench

* Ratchet with 3/4” and 9/16” sockets

* 7/32” Allen wrench

* Adjustable wrench

* Tape measure

NOTE:BOLTLENGTHISMEASURED FROMTHEUNDERSIDEOFTHEHEAD OFTHEBOLT.

BOLT LENGTH RULER:

* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy

water. Touch-up paint can be purchased from your Parabody customer service representative

at (800) 328-9714.

Bolt Length Ruler

0123456

1/2 1/2 1/2 1/2 1/2 1/2

BOLT LENGTH

There is a risk assumed by individuals who use this type of equipment. To minimize risk, please

follow these rules:

2. Do not allow minors or children to play on or around this equipment.

1. Inspect equipment daily. Tighten all loose connections and replace worn parts immediately.

Failure to do so may result in serious injury.

3. Exercise with care to avoid injury.

4. If unsure of proper use of equipment, call your local Parabody distributor or call the

Parabody customer service department at (800) 328-9714.

STEP 1

FIGURE 1

PART #

6747708

3116201

3108102

6427101

3118701

3201501

6271801

6747901

KEY

QTY

PART #

3102701

3102501

3102802

3102502

3102801

3102902

3102910

3102909

DESCRIPTION

3/8”HEXNUT

3/8”WASHER

3/8”LOCKNUT

1/2”WASHER

1/2”LOCKNUT

3/8X2-1/4”BOLT

1/2X3”BOLT

3/8X1”

QTY

DESCRIPTION

FRONTLEG

3-1/2”PULLEY

QUICKDISCONNECTLINK

KEYHOLECLEVIS

2”PULLEY

SWIVELSNAP

72”ELASTICCORD

LEGPRESSCABLE

KEY

NOTE: The LEG PRESS ATTACHTMENT (100101) must be assembled before connecting it to the

PARABODY 660101 HOME GYM

PARTS LIST

• REMOVE the four 3/8” X 1” BUTTON HEAD CAP SCREWS from the rear SHROUD. Remove the SHROUD from the 660101

HOME GYM. See FIGURE 1.

REAR SHROUD

3/8” X 1” BUTTON

HEAD CAP SCREW

3/8” X 1” BUTTON

HEAD CAP SCREW

STEP 2

FIGURE 2

REAR

SHROUD

• If the 663101 SECOND STACK OPTION is not installed, the rear SHROUD opening must be removed. Apply pressure to the

bottom of the SHROUD where the “V” groove is and carefuly remove the weight stack opening on the SHROUD as shown in

FIGURE 2.

0123456

1/2 1/2 1/2 1/2 1/2 1/2

FIGURE 3

STEP3

• Remove two 3/8” LOCK NUTS, two 3/8” HEX NUTS, two SWIVEL SNAP (keep elastic cords attached), two 3/

8 X 1/2” SPACERS, and one 3/8”THREADED SHAFT from the bracket on the BASE as shown in FIGURE 3.

BASE

HEXNUT

• Discard the two 3/8 X 1/2” SPACERS.

HEXNUT

3/8 X 1/2”

SPACERS

(DISCARD)

3/8”THREADED SHAFT

SWIVELSNAP

3/8”LOCKNUT

SWIVELSNAP

3/8”LOCKNUT

ELASTICCORD

FIGURE 4

BASE

HEXNUT 3/8” LOCK NUT

STEP4

• Assemble the two previously removed 3/8” HEX NUTS, two previously removed SWIVEL SNAPS, one 3-1/2” PULLEY (2), and two

previouslyremoved 3/8” LOCK NUTSto the previously removed3/8”THREADED SHAFT as showninFIGURE 4.

HEXNUT

3/8”LOCK NUT

0123456

1/2 1/2 1/2 1/2 1/2 1/2

3/8”THREADED SHAFT

SWIVELSNAP

FIGURE 5

STEP5

• Removeone3/8X 2” BOLT,two3/8”WASHERS, one 2-7/8” L-BRACKET, one 4-1/2” PULLEY,andone 3/8” LOCK NUT from the

upper flat on the BASE as shown in FIGURE 5.

BASE

3/8”WASHER

4-1/2” PULLEY

3/8”WASHER

3/8”LOCK NUT

2-7/8”L-BRACKET

3/8”X2”BOLT

FIGURE 7A

(WITHOUT 663101

SECOND STACK

OPTION)

STEP 7A

3/8”LOCK NUT

TOPBOOM

9 3/8”HEX NUT

• SECURELY assembleone 2” PULLEY(5) tothe 3/8”THREADEDSHAFTontheTOPBOOMusing one previously installed3/8”

WASHER, one 3/8”HEXNUT (9)andone previously installed 3/8”LOCKNUTas shown inFIGURE 7A.

3/8”WASHER

FIGURE 6

STEP6

• SECURELY assemble thepreviouslyremoved 4-1/2” PULLEYtotheBASE using one 3/8X2-1/4”BOLT(14), two previously

removed3/8”WASHERS,one previously removed 2-7/8”L-BRACKET, oneSWIVELSNAP(6), one 3/8” HEX NUT(9), and one

previouslyremoved3/8”LOCKNUT.SeeFIGURE6.

BASE

14 3/8X2-1/4”

3/8”WASHER

4-1/2” PULLEY

2-7/8”L-BRACKET

9 HEXNUT

3/8”LOCK NUT

• If the 663101 SECOND STACK OPTION is installed follow STEP 7B .

3/8”WASHER

• Remove one 3/8” WASHER and one 3/8” LOCK NUT from the 3/8”THREADED SHAFT on theTOPBOOM.

FIGURE 7B (WITH

663101 SECOND

STACK OPTION)

STEP 7B

• If the 663101 SECOND STACK OPTION is NOT installed proceed to STEP 8 .

TOPBOOM

3/8” X 1” 16

5 11 3/8”LOCKNUT

• SECURELYassemble one 3/8 X 1” BOLT(16), one 3/8”WASHER(10),one2” PULLEY(5) and one 3/8” LOCK NUT(11) to the

bracket on the TOP BOOM as shown in FIGURE 7B.

STEP8

• SECURELY attach one 3-1/2” PULLEY(2) to the FRONT

LEG(1)using one 3/8X2-1/4”BOLT(14), two 3/8”WASH-

ERS(10),and one3/8”LOCKNUT(11). See FIGURE8.

• Attach the open end of PRESS LINK CABLE (8) to the

QUICKDISCONNECTLINK(3).SeeFIGURE8.

• SECURELY tighten the QUICK DISCONNECT(3) to the

tabon the FRONT LEG (1) asshowninFIGURE 8.

FIGURE 8

3/8X2-1/4” 14

SECURELY

TIGHTEN!

10 11

0123456

1/2 1/2 1/2 1/2 1/2 1/2

STEP9

FIGURE 9

• RouteLEGPRESS CABLE (8)aroundthe3-1/2”PULLEYon the LEGPRESSandUNDERthe3-1/2”PULLEYon the FRONTLEG(1)

asshown in FIGURE 9.

• SECURELYattach the LEG PRESS tothe FRONTLEG (1) using two 1/2” X 3”BOLTS (15), two 1/2” WASHERS (12), andtwo 1/2”

LOCKNUTS(13).SeeFIGURE9.

LEGPRESS

1/2X 3” 15

12 8

FIGURE 10

STEP10

• SECURELYattach the FRONT LEG (1) to 660 BASE using two 1/2 X 3” BOLTS (15), two 1/2” WASHERS (12) and two 1/2” LOCK

NUTS (13). See FIGURE 10.

• RouteLEGPRESSCABLE(8)underthe3-1/2” PULLEY on the 425 BASE as shown in FIGURE 10.

13 12

1/2 X 3” 15

BASE

0123456

1/2 1/2 1/2 1/2 1/2 1/2

Inhaltsverzeichnis

Andere ParaBody Fitnessgeräte Handbücher

ParaBody

ParaBody 848 Bedienungsanleitung

ParaBody

ParaBody 880 Bedienungsanleitung

ParaBody

ParaBody Parabody 805 Montageanleitung

ParaBody

ParaBody 883101 Bedienungsanleitung

ParaBody

ParaBody 844 Bedienungsanleitung

ParaBody

ParaBody 837101 Bedienungsanleitung

ParaBody

ParaBody Free Weight Smith System Bedienungsanleitung

ParaBody

ParaBody 886 Montageanleitung

ParaBody

ParaBody 858 Montageanleitung

ParaBody

ParaBody 889 Bedienungsanleitung

ParaBody

ParaBody 866101 Montageanleitung

ParaBody

ParaBody 838 Bedienungsanleitung

ParaBody

ParaBody 807 BODYSYSTEM Bedienungsanleitung

ParaBody

ParaBody 855 Bedienungsanleitung

ParaBody

ParaBody Hip Sled System Bedienungsanleitung

ParaBody

ParaBody 877101 Montageanleitung

ParaBody

ParaBody Serious Steel 835102 Bedienungsanleitung

ParaBody

ParaBody 868 Montageanleitung

ParaBody

ParaBody 801101 Montageanleitung

ParaBody

ParaBody 781 Bedienungsanleitung

ParaBody

ParaBody 829 Bedienungsanleitung

ParaBody

ParaBody 813 Bedienungsanleitung

ParaBody

ParaBody 867101 Montageanleitung

ParaBody

ParaBody 908101 ST Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung

SteelFlex

SteelFlex PLHP Kurzanleitung